Contact us
Close contact box
Connect ID #
104 066 842 3

Our hours

Connect ID #
104 066 842 3
Chat
All finished with your chat session?

We’ll email you a transcript of this conversation for your records.

For simple questions about your order,
try our new virtual agent:

Please enter your name.  
Please enter a valid email address. Why is this required?
Please enter your US phone number.  

For Tech Support, call 1-888-292-2575

Thank you, !
Our conversation will be emailed to
Please enter a question  
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  

Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Alpine SPS-610C

Type-S 6-1/2" component speaker system

Item # 500SPS610C

The sonic specialists at Alpine optimize their SPS-610C component speakers for great range and impressive tone...

Find what Fits your car

The sonic specialists at Alpine optimize their SPS-610C component speakers for great range and impressive tone...

Discontinued item
17 questions - 34 answers

Item # 500SPS610C

About the Alpine SPS-610C

Enjoy stellar sound

The sonic specialists at Alpine optimize their SPS-610C component speakers for great range and impressive tone definition, even at low power levels. You can connect these versatile Type-S Series speakers to your factory stereo for an immediate sonic improvement, or hook them up to a powerful aftermarket stereo or amp for increased performance.
Alpine Authorized Online Dealer

Enjoy stellar sound

The sonic specialists at Alpine optimize their SPS-610C component speakers for great range and impressive tone definition, even at low power levels. You can connect these versatile Type-S Series speakers to your factory stereo for an immediate sonic improvement, or hook them up to a powerful aftermarket stereo or amp for increased performance.

Mineral-fortified polypropylene cones are exceptionally stiff, yet lightweight, which means they can push out accurate bass and deliver clear midrange. Resilient rubber surrounds help keep the woofer centered for accurate cone movement, reducing distortion. You can aim the separate silk dome tweeters toward you so that they deliver the strongest possible stereo image.

Installation note: You'll need a pair of our universal backstraps to install the tweeters in the factory locations.

Grilles are not included; the factory grilles should be suitable for most applications.

Priced per pair

READ LESS

Product highlights:

  • component speaker system includes two woofers, two tweeters, and two built-in crossovers
  • mineral-fortified polypropylene woofer cone with rubber surround
  • woofer fits 6-1/2" and 6-3/4" speaker openings
  • 1" silk dome tweeter
  • power range: 2-80 watts RMS (240 watts peak power)
  • frequency response: 70-22,000 Hz
  • sensitivity: 88 dB
  • top-mount depth: 2-1/4"
  • grilles not included
  • warranty: 1 year
  • Our 60-day money-back guarantee
  • MFR # SPS-610C

What's in the box:

  • 2 Woofers
  • 2 Tweeters (each has an attached 29" length of wire)
  • 2 Tweeter grilles (installed)
  • 2 Swivel flush mount housings (with tweeters installed)
  • Two 37" Tweeter wires with in-line crossovers (each has quick slides on both ends)
  • Two 6-1/2" Adapter rings (includes GM/Chrysler 6-3/4G size)
  • 2 Flush mount retention rings
  • 2 Stealth brackets
  • 2 Foam self-adhesive pads
  • 2 Foam self-adhesive rings
  • Eight 1-1/8" Self-tapping screws
  • Eight M4x12mm Machine screws
  • 8 Speed-clips
  • Warranty information
  • Important Notice sheet
  • Template and specs on box

Customer reviews

Loading reviews...

Alpine SPS-610C reviews

Average review:

189 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

<< >>

More details on the Alpine SPS-610C

Pat M.

Features & specs

General
Speaker Size 6 1/2
Design 2-way
Tweeter Design 1" Dome
Impedance (Ohms) 4
Tweeter Composition Silk
Woofer Composition Poly-Mica
Woofer Surround Rubber
Parts Warranty 1 Year
Labor Warranty 1 Year
Specifications
Sensitivity (1W at 1 meter) 88
Sensitivity at 2.83 volts N/A
Frequency Response 70 - 22k Hz
Minimum RMS Wattage 2
Maximum RMS Wattage 80
Peak Power Handling (Watts) 240
Top-mount Depth (Inches) 2 1/4
Bottom-mount Depth (Inches) 2 9/16
Cutout Diameter or Length (inches) 5 1/16
Mounting Height (Inches) 0.451
The Alpine SPS-610C replaces these items:

Product Research

Features

Poly-Mica Woofer Cones: Each woofer features a Poly-Mica cone and butyl rubber surround. Mica adds strength and heat resistance to polypropylene, resulting in reduced distortion and improved reliability.

Silk Dome Tweeters: The 1" wide-range silk dome tweeters offer clean, non-fatiguing sound even under extreme high frequency demands.

Tweeter Mounting Options: The tweeters can be flush mounted using the supplied flush mount bracket and ring. Once mounted, the tweeters can swivel approximately 30° for optimum imaging. The tweeters can also be mounted in factory tweeter locations behind factory tweeter grilles using the supplied stealth mounting bracket.

  Flush Mount (swivel) Factory Location (bottom mount) Factory Location (top mount)
Mounting Depth 0.663" 0.789" 0"
Mounting Height 0.440" N/A 0.806"
Cutout Diameter 2.004" 1.716" N/A
Frame Diameter 2.275" 2.668" 2.587"

Woofer Mounting: Without an adapter, the woofers fit standard 6-3/4" applications. Given their required cutout, they will also fit standard 6-1/2" applications without an adapter, but new screw holes must be drilled. Using the included adapter brackets they can be mounted in a variety of standard 3-hole 6-1/2" applications, Ford 4-hole 6-1/2" applications, and non-standard 6-3/4" applications, without any modification.

Crossovers: The Alpine SPS-610C features low-pass crossovers attached to each woofer's input terminal and high-pass crossovers in-line with the tweeters' speaker wires.

Loading accessories...

Customer Q&A

Q
Crutchfield asked: Why did you buy this?
A
Alpine [ Donald  Dec 11, 2018 ]
A
a friend of mine said they would work [ jonnathon  Dec 03, 2018 ]
A
Good reviews, good value, and the right combination of size and 4 ohms as was originally installed in our classic (1990) motorhome system. Replacing speakers with disintegrated surrounds. [ Jorge  Nov 27, 2018 ]
A
They sound awesome! [ Christopher  Oct 19, 2018 ]
A
I've been looking for the right speakers for the right price and they are the ones for my car. [ frank  Sep 28, 2018 ]
A
I have been an Alpine fan for years,so naturally I gravitated towards this component set. [ Milbert  Sep 10, 2018 ]
A
decent rms plus can be used with factory radio [ WILLIAM  Jul 31, 2018 ]
A
Love Alpine and a great deal [ Laurie  Jul 30, 2018 ]
A
Was recommended to me by CarAV of Reddit. [ Chase  Jul 17, 2018 ]
A
Can't beat that deal with a stick! [ Cole Richard  Jul 17, 2018 ]
A
good reviews and in my budget. [ Ryan  Jul 10, 2018 ]
A
I was instructed by the site's automated system that these will not fit my 1997 prelude, however I really wanted component speakers and didn't want to settle for coax's... the highs man! Browsing forums specifically for my vehicle showed me I can probably get these to work with a bit of elbow grease and am prepared for that. Also buy one get one half off? Yes please. :) [ Cristian  Jun 29, 2018 ]
A
My MTX failed me so I went with these speakers to match all the other Alpine equipment I have installed. [ CHRISTOPHER D  May 21, 2018 ]
A
because my Alpine system ate my MTX door speakers and so I thought I would match the system with an Alpine Speaker that may handle the power better. [ CHRISTOPHER D  May 03, 2018 ]
A
Reasonable price, decent power range. Sound should be a bit clearer and fuller. [ Jonathan  Apr 30, 2018 ]
A
On special, quality name. I am looking for an all-around speaker for Classical, POP, Rock, and Talk Radio. Crutchfield will take care of me if they do not work out. [ PATRICK  Jan 30, 2018 ]
A
I chose the Alpine sps-610c to go with my system that I have I have two mrv M500 and 15 "subwoofers [ Clyde  Dec 21, 2017 ]
A
Alpine is a quality product. [ BRAD A  Dec 11, 2017 ]
A
recommended by agent [ Richard  Dec 06, 2017 ]
A
The price... [ Andrew  Aug 14, 2017 ]
A
Top Seller and I love Alpine products, Maverick offered great insight into these speakers based on what I was looking to have installed in my car. [ Ike  Aug 05, 2017 ]
A
I have a pair in the back extended cab and they sound so good I need to have a matching pair in the front doors [ Raymond  Jul 20, 2017 ]
A
Big fan of Alpine. The specs listed for the set fit my needs and the price was fine [ David  Jul 14, 2017 ]
A
Replacement of corroded aftermarket speakers. [ Harvey  May 09, 2017 ]
A
I like alpine stuff always have [ michele  Apr 20, 2017 ]
A
tech shawn s advice [ roy  Mar 05, 2017 ]
A
good up grade from factory speakers [ Lewis  Mar 01, 2017 ]
A
I have owned just about every one of Alpine's component speakers in sizes 5" and up, if they fit in your car, the only question is what model fits your budget. I have found that putting the best ones in the front and the more budget priced in the rear is a great combination. I always use the Alpine PowerPack and the combo is sweet. You won't blow the windows out but you will not regret the crispness of the drum hits and the smooth sounds that well located components from Alpine can bring! [ Daryl  Dec 21, 2016 ]
A
To replace a blown speaker and a better quality of music [ Zona  Oct 20, 2016 ]
A
have alpine hu and alpine power pack.....liked both and wanted to stay with same manufacturer. [ david  Sep 27, 2016 ]
A
good quality, strongly recommended, should be more than enough. [ Sean  Jun 28, 2016 ]
A
Excellent brand and reviews, plus buy one get one free, that's a winning combo! [ Tj van der  Jun 07, 2016 ]
A
Quality [ robert charles  Jun 05, 2016 ]
A
It fits my custom application, and with such small speakers, Alpine was my choice for power handling, reviews, and sound quality for my whole full-range system. [ Valerie  May 24, 2016 ]
A
These are installed in my Jeep to help overcome the large tires and lack of sound deadening. [ Vince  May 05, 2016 ]
A
Alpine is the best bang for the buck when you don't have the need to go high end [ allen  Mar 30, 2016 ]
A
Great reviews. Great Price. [ Bryan  Mar 24, 2016 ]
A
Tweeters can replace the small speakers on the dashboard [ Manuel  Mar 15, 2016 ]
A
I wanted speakers that would require me to amplify them to use the but gave me room to do it later, these speakers say they will play from 2 - 80 watts rms [ gomezj22  Feb 22, 2016 ]
A
They had good reviews & I wanted a good sounding component speaker system. [ John  Jan 25, 2016 ]
A
Alpine's reputation for quality and sound [ Edward  Jan 17, 2016 ]
A
Had all the features I wanted. Looking forward to upgrading from the stock speakers. Good price, good features [ Gary  Jan 04, 2016 ]
SHOW MORESHOW LESS

17 questions already asked

Q
Can these speakers be dropped to 2 ohms for more power?
[ Spencer  Dec 05, 2017 ]
1 answer
A
The Alpine SPS-610C have a 4-ohm impedance, and I'm afraid there's no way to change/drop that to a lower impedance. For more details or to discuss further, please contact an Advisor directly by phone (888.955.6000) or online chat. Thanks!
[ Larry  Dec 10, 2017 ]  Staff
Q
I purchased these with the ktp-445a power pack and they have ZERO BASS...any idea what the problem is? Powered through a new alpine HU.
[ Greg  Jun 02, 2017 ]
1 answer
A
If you purchased the product from Crutchfield, feel free to contact our Tech Support team. They can walk you through the settings/connections on the product and see if there may be a fix. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer, or try our online support center: http://crutchfield.custhelp.com/app/answers/list/kw/.
[ Kenny  Jun 02, 2017 ]  Staff
Q
This is advertised with both low-pass and hi-pass inline crossovers. Do you know the frequencies of the crossovers? Thanks!
[ Marc  Mar 28, 2017 ]
1 answer
A
The cutoff frequencies of the supplied crossovers are not published by Alpine. Together, the midbass drivers and tweeters have a combined frequency response of 70-22,000Hz. If you need to know the crossover points, you may be able to get them by contacting Alpine directly: 800-257-4631 I hope that helps. My Bio: https://www.crutchfield.com/Support/Bio.aspx?bio=5
[ Ryan  Apr 05, 2017 ]  Staff
Q
So I have an 07 2500hd classic. Non Bose crew cab. I bought the 610s for rear and 610c for fronts as instructed at best buy. Thinking my stock radio/CD player was probably perfect because GM usually has decent tunes. Installed all speakers. Used gm plug adapters. Did not use capacitor for tweets because truck factory wired for them. 2 days blown drivers speaker...... Kinda annoyed because it's factory set up and wiring. Anyone else have this problem?
[ Michael  Sep 20, 2016 ]
1 answer
A
The tweeters and woofers in the non-Bose system are wired in parallel with the crossover for each built into the speaker. Not using the Alpine crossovers could have been what caused them to get damaged. Also, I would not expect a big change in volume levels and trying to get more volume than you did before could have caused them to blow as well. Feel free to call an advisor on 1-800-324-9695 a personal recommendation on a system. HTH! My Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=101
[ Paul  Sep 26, 2016 ]  Staff
Q
Is the basket on the woofers cast or stamped?
[ Ron  Jun 26, 2016 ]
1 answer
A
They have HD Polymer frames if that's what you were asking. I felt they were very sturdy and strong. I have been very happy with them
[ Dennis  Jun 28, 2016 ]
Q
Can these speakers be mounted with a metra 82-7500 bracket ? Bracket states for 5 1/4 to 6 1/2. Alpine identifys as a 6 1/2 but is listed as a 6 3/4 by crutchfield. Thanks!
[ Jamie  Apr 16, 2016 ]
1 answer
A
For additional details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
[ Kenny  Apr 16, 2016 ]  Staff
Q
IF THE TWEETER CROSSOVER NET BE WIRES IN REVERSE WILL IT WORK PROPERLY?
[ KEN  Mar 06, 2016 ]
1 answer
A
You'll want to connect the leads for each speaker in the same manner to ensure each driver will be in phase with the others. The tweeters have pre-attached "quick slide" connectors to help ensure you connect them properly. I hope that helps! My Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=5
[ Ryan  Mar 09, 2016 ]  Staff
Q
The speakers come with two separate cylindrical looking pieces wrapped in black plastic tubing. Each side has connector wires coming out. It seems to be something I would connect between the speaker itself and the connectors on my car. What is this piece and is it necessary for the speakers to function properly?
[ Michael  Dec 28, 2015 ]
3 answers
A
I believe you're describing the crossovers for the tweeters. Each one should be wired in line on one side of each tweeter.
[ Kevin  Dec 29, 2015 ]
A
Those should be the wiring from the main speaker to the tweeter. The cylindrical piece I think is some kind of capacitor to keep the high frequency to the tweeter only. Your factory harness should plug into a supplied wiring adapter and that should plug into the main speaker so no splicing is necessary. I hope that helps.
[ ROBERT  Dec 28, 2015 ]
A
I Believe that's the crossovers for the tweeters
[ CRAIG  Dec 28, 2015 ]
Q
I have a 2014 Hyundai Veloster.... would I need any extra parts to mount these speakers to the car?
[ Sebastian  Dec 10, 2015 ]
1 answer
A
For details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
[ Jeff  Dec 11, 2015 ]  Staff
Q
Will these speakers work well with a factory stereo?
[ Mitchell  Oct 08, 2015 ]
5 answers
A
They will work, whether or not they work "well" will depend on the factory stereo. They are good quality speakers that will sound good as long as the signal being sent to them is a quality signal from a quality stereo. Hope that makes sense. In other words your speakers are limited by the sound quality of the stereo and factory stereos can sound great and they can sound like crap depending on the car. bottom line, I'd upgrade your stereo as well but you will almost assuredly hear a great improvement by upgrading to these speakers.
[ Christian  Oct 10, 2015 ]
A
Yes. Sound great with factory stereo.
[ DYLAN  Oct 09, 2015 ]
A
Worked great with my 2003 GM factory receiver and a powered subwoofer.
[ Robert  Oct 09, 2015 ]
A
They absolutely will. I installed them in my 03 silverado. They did ok. Then I realized my factory stereo didn't sound so great. So I replaced it and now those speakers sound awesome. Plenty of base with good mid range sound. I have tweeters up front to round out the overall sound in the truck. Install was very easy and straightforward as well.
[ Jose  Oct 09, 2015 ]
A
Yes, I have a factory radio on my car! It works just fine.
[ ELAINE  Oct 09, 2015 ]
Q
Do the Alpine SPS-610C come with the crossover? or is that a bought separate?
[ darrick  May 14, 2015 ]
4 answers
A
Yes they come with them. About a 3 inch rectangle box. I mounted mine in my dash with double sided tape and zip ties to be safe. 07 trailblazer
[ MICHAEL  May 14, 2015 ]
A
The crossover comes with the speakers. I was able to stuff the crossover in the car door armrest. I think the separate tweeter, woofer, and crossover combination provides the best performance without replacing the car's built in head unit.
[ JAMES D  May 14, 2015 ]
A
It has a built-in inline coil crossover. So you wont have to buy a separate one, unless you want more options in a physical crossover.
[ MATTHEW  May 14, 2015 ]
A
It does come with the crossover
[ DAVID  May 14, 2015 ]
Q
While the included Metra 72-6514 harness is nice for the woofers, what about the tweeters? They do not take the same harness.
[ Jack  Apr 06, 2015 ]
1 answer
A
For details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
[ Krissy  Apr 07, 2015 ]  Staff
Q
How do I install this into my vehicle myself? What parts don't ckme with the installation kit that I will need? Where can I get the parts that don't come with it? Will it work in my car? 2009 Nissan Altima coupe no Bose system
[ Nafez  Dec 02, 2014 ]
1 answer
A
For details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
[ Krissy  Dec 03, 2014 ]  Staff
Q
How did everyone mount the inline crossovers on the tweeter wire? Did you all just let it hang? I don't see a good way to attach this to anything.
[ Alyssa  Mar 08, 2014 ]
9 answers
A
I just let it lie in-line with the wire path.
[ CHARLES G  Mar 10, 2014 ]
A
What I did was put the crossover right on top of the plastic speaker adapter and actually used tape. Not the best solution, but I was more worried about getting it to stay there until I got the door panel back on. No issues after that.
[ MATTHEW  Mar 10, 2014 ]
A
ROLL UP AND TIE WRAP
[ BARRY  Mar 10, 2014 ]
A
I actually sent mine back as I got a different component set, but best is to call technical. They really do know their stuff.
[ ALAN  Mar 09, 2014 ]
A
I actually had some leftover strips of DynaMat from my install on the car. Kinda just glued the crossovers down using the DynaMat strips if that helps.
[ DAVID R  Mar 09, 2014 ]
A
A simple solution is to use two nylon wire ties.
[ WILLIAM  Mar 09, 2014 ]
A
Hot glue or tape to side of speaker mount.I hot glued them to the door speaker bracket on side of it so it didn't interfere with anything inside door and twist tie extra wire from crossover.
[ MICHELLE  Mar 09, 2014 ]
A
I just let it hang in the door
[ MICHAEL  Mar 09, 2014 ]
A
Don't let them just hang this well cause stress on your wires and over a short time the wires well brake I used some plastic zip ties to hold in place. I used longer ones to reach and cut off the extra. Not sure what vehicle your installing them in but make sure you have everything secure in your door panels other wise it well rattle and make noise and then you'll be doing it all over again I hope this helps good luck and great choice in speakers I have mine in a 2001 GMC and they sound great.
[ BRUCE  Mar 09, 2014 ]
Q
Will a Headunit with a built in amp be enough power for these speakers? I would rather not have to buy an amp as well. The headunit i'm thinking of getting has the following output: RMS: 14 watts Peak: 50 watts
[ matt  Feb 25, 2014 ]
1 answer
A
Thanks for your question. For information on built in amp vs. purchasing an amp I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system.
[ Krissy  Feb 26, 2014 ]  Staff
SHOW MORESHOW LESS

Loading articles...

TOP