Chat
Contact us
Close contact box
Connect ID #
139 271 965 3
Connect ID #
139 271 965 3
All finished with your chat session?

We’ll email you a transcript of this conversation for your records.

All of our representatives are
currently chatting with other customers.

Please enter your name.  
Please enter a valid email address. Why is this required?
Please enter your US phone number.  

For Tech Support, call 1-888-292-2575

Thank you, !
Our conversation will be emailed to

Your Advisor,

More about me
Please enter a question  
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  

Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Alpine SPV-65-JLT

6-1/2" component speaker system — for rear soundbar of 2018-up Jeep vehicles

Item # 500SPV65JL

Alpine promises good times for the gang in the backseat of your 2018-up Wrangler or your 2020-up Gladiator with...

Find what Fits your car

Alpine promises good times for the gang in the backseat of your 2018-up Wrangler or your 2020-up Gladiator with...

California customers:
Please click here for your Proposition 65 warning.

Item # 500SPV65JL

In stock

Deeply discounted installation gear

$499.95 pair

About the Alpine SPV-65-JLT

Upgrade your Jeep's soundbar

Alpine promises good times for the gang in the backseat of your 2018-up Wrangler or your 2020-up Gladiator with this awesome speaker upgrade. Alpine's SPV-65-JLT component speaker system lets you upgrade the factory 3" and 4" speakers in your rear soundbar with 6-1/2" polymer woofers and 1" tweeters. Alpine has also designed this weather-resistant system to endure the environmental harshness of life in your Jeep, even when the top is off.
Alpine Authorized Online Dealer

Upgrade your Jeep's soundbar

Alpine promises good times for the gang in the backseat of your 2018-up Wrangler or your 2020-up Gladiator with this awesome speaker upgrade. Alpine's SPV-65-JLT component speaker system lets you upgrade the factory 3" and 4" speakers in your rear soundbar with 6-1/2" polymer woofers and 1" tweeters. Alpine has also designed this weather-resistant system to endure the environmental harshness of life in your Jeep, even when the top is off.

Worthy sound

This 6-1/2" component system lets you use factory bolt holes and gives you two weather-resistant woofer cones and 1" Teteron dome tweeters. Alpine provides vehicle-specific connectors for easy installation, and premium grilles for a great look. Get ready for a serious sonic step-up.

Important Installation Note: You'll have to enlarge the 4" openings in your soundbar to accept the larger 6-1/2" speakers, and Alpine includes a template for cutting the plastic. If you haven't attempted a project like this before, you should consult a professional installer.
READ LESS

Product highlights:

  • compatible with select 2018-up Jeep Wrangler and 2020-up Jeep Gladiator models
  • package includes:
    • 6-1/2" polymer woofers
    • 1" Teteron dome tweeters
    • speaker grilles
    • vehicle-specific connectors
    • template for cutting
  • handles up to 90 watts RMS (225 watts peak)
  • uses factory bolt holes
  • modification required
  • IP55 weather-resistant rating
  • sensitivity: 87.8 dB
  • impedance: 4 ohms
  • warranty: 1 year
  • Our 60-day money-back guarantee
  • MFR # SPV-65-JLT

What's in the box:

  • One right speaker
  • One left speaker
  • Template
  • Eight M4x20mm Machine screws (5mm Allen head)
  • 2 Pollyfill sheets (10" x 13")
  • Warranty information
  • On-line product registration information
  • Important Notice sheet
  • Installation manual

Customer reviews

Loading reviews...

Alpine SPV-65-JLT reviews

Average review:

12 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

<< >>

More details on the Alpine SPV-65-JLT

Pat M.

Features & specs

General
Speaker Size Vehicle-specific
Design 2-way
Tweeter Design 1" Dome
Impedance (Ohms) 4
Tweeter Composition Teteron
Woofer Composition Polymer
Woofer Surround Rubber
Parts Warranty 1 Year
Labor Warranty 1 Year
Specifications
Sensitivity (1W at 1 meter) 87.8
Sensitivity at 2.83 volts N/A
Frequency Response 50 - 22k Hz
Minimum RMS Wattage ---
Maximum RMS Wattage 90
Peak Power Handling (Watts) 225
Top-mount Depth (Inches) 2 3/4
Bottom-mount Depth (Inches) N/A
Cutout Diameter or Length (inches) 5 1/2
Mounting Height (Inches) 1.42

Product Research

Features

Overview: Alpine's SPV-65-JLT component speakers are designed for 2018 and later Jeep Wrangler/Wrangler Unlimited models (JL body style) and 2020 and later Jeep Gladiator models. Each woofer/tweeter pair in this component set is mounted to a plate, which includes a grille covering both. They mount in the soundbar location.

Note: In 2018 Jeep built two versions of the Wrangler and Wrangler Unlimited, the JK (older body style) and the JL (new body style). These Alpine speakers fit the newer JL body; they do not fit the older JK body.

Wiring: These Alpine speakers have the same input plug as the Jeep factory woofers, so the factory harness is directly compatible. No cutting into the factory wiring is required.

Modification: The panels behind the factory grilles must be modified to accommodate the larger Alpine woofers. A template to mark the cut patterns is included. Once the soundbar is modified, the factory speakers cannot be reinstalled.

Loading accessories...

Customer Q&A

16 questions already asked

Q
2020 Jeep Gladiator w/ 8.4 Premium Sound. Your own selector says it won't fit, but your articles say the 6.5 will fit? What exactly does one have to do to make them work the way they should?
[ Timothy  Jan 24, 2021 ]
1 answer
A
I have the alpine premium with the 8.4" and it's no different to install than the base speaker setup. Technically believe it or not the difference between the base and the expensive alpine upgrade is only a small amp and a subwoofer. The speakers themselves are exactly the same as the base model. To install you do need to cut out the old pods to mount these. Kit comes with a template and albeit I was super nervous to cut up my speaker bar it was incredibly easy with a super cheap air saw (ten bucks online or HF). Speakers look great and are night and day difference over stock.
[ John  Jan 24, 2021 ]
Q
I have a 2019 Jeep Wrangler JL with the Alpine premium sound system w/sub. Will these speakers work? I've read some say it will work and others that it won't. What is the real answer? Thanks! Steve
[ Steve-o  Jan 16, 2021 ]
1 answer
A
Yes use the separate connectors Crutchfield sends and connect them directly to the large speaker. Connect the wire on the crossover to 3" factory harness and the new plug to the 4" factory harness. This is for 8.5 premium sound system.
[ Tim  Jan 16, 2021 ]
Q
Will these work if I have the Alpine PSS-23WRA system already installed?
[ Jason  Dec 25, 2020 ]
4 answers
A
If you're referring to the upgraded factory Wrangler JL Alpine system...I read no. My system is the base 7in screen system and I upgraded to these sound bar speakers. Go to Alpine or Crutch for confirmation...these is also a recent convo string on the Facebook Wrangler JL page that was lead by a guy from Alpine. Hope this helps
[ MILLER  Dec 25, 2020 ]
A
Yes. I installed these speakers after the pss23wra. I've had to turn the manual bass control considerably lower than before. I reached out to Alpine to see if they had different recommended settings and they suggest the same amp settings either way.
[ JOHN  Dec 25, 2020 ]
A
I put them in a 2018 JL Rubicon with the Alpine system. You'll need to cut out original tweeter and woofer. Use the woofer plug to hook up new speakers. Plug for tweeter is not used. Huge difference in the sound! It's what Jeep should have had as an option to begin with.
[ DAVID  Dec 25, 2020 ]
A
Yes
[ JON  Dec 25, 2020 ]
Q
2020 Jeep Gladiator w/ 8.4 Premium Sound. Your own selector says it won't fit, but your articles say the 6.5 will fit? What exactly does one have to do to make them work the way they should?
[ Timothy  Jan 24, 2021 ]
1 answer
A
I have the alpine premium with the 8.4" and it's no different to install than the base speaker setup. Technically believe it or not the difference between the base and the expensive alpine upgrade is only a small amp and a subwoofer. The speakers themselves are exactly the same as the base model. To install you do need to cut out the old pods to mount these. Kit comes with a template and albeit I was super nervous to cut up my speaker bar it was incredibly easy with a super cheap air saw (ten bucks online or HF). Speakers look great and are night and day difference over stock.
[ John  Jan 24, 2021 ]
Q
I have a 2019 Jeep Wrangler JL with the Alpine premium sound system w/sub. Will these speakers work? I've read some say it will work and others that it won't. What is the real answer? Thanks! Steve
[ Steve-o  Jan 16, 2021 ]
1 answer
A
Yes use the separate connectors Crutchfield sends and connect them directly to the large speaker. Connect the wire on the crossover to 3" factory harness and the new plug to the 4" factory harness. This is for 8.5 premium sound system.
[ Tim  Jan 16, 2021 ]
Q
Will these work if I have the Alpine PSS-23WRA system already installed?
[ Jason  Dec 25, 2020 ]
4 answers
A
If you're referring to the upgraded factory Wrangler JL Alpine system...I read no. My system is the base 7in screen system and I upgraded to these sound bar speakers. Go to Alpine or Crutch for confirmation...these is also a recent convo string on the Facebook Wrangler JL page that was lead by a guy from Alpine. Hope this helps
[ MILLER  Dec 25, 2020 ]
A
Yes. I installed these speakers after the pss23wra. I've had to turn the manual bass control considerably lower than before. I reached out to Alpine to see if they had different recommended settings and they suggest the same amp settings either way.
[ JOHN  Dec 25, 2020 ]
A
I put them in a 2018 JL Rubicon with the Alpine system. You'll need to cut out original tweeter and woofer. Use the woofer plug to hook up new speakers. Plug for tweeter is not used. Huge difference in the sound! It's what Jeep should have had as an option to begin with.
[ DAVID  Dec 25, 2020 ]
A
Yes
[ JON  Dec 25, 2020 ]
Q
2020 Jeep Gladiator w/ 8.4 Premium Sound. Your own selector says it won't fit, but your articles say the 6.5 will fit? What exactly does one have to do to make them work the way they should?
[ Timothy  Jan 24, 2021 ]
1 answer
A
I have the alpine premium with the 8.4" and it's no different to install than the base speaker setup. Technically believe it or not the difference between the base and the expensive alpine upgrade is only a small amp and a subwoofer. The speakers themselves are exactly the same as the base model. To install you do need to cut out the old pods to mount these. Kit comes with a template and albeit I was super nervous to cut up my speaker bar it was incredibly easy with a super cheap air saw (ten bucks online or HF). Speakers look great and are night and day difference over stock.
[ John  Jan 24, 2021 ]
Q
I have a 2019 Jeep Wrangler JL with the Alpine premium sound system w/sub. Will these speakers work? I've read some say it will work and others that it won't. What is the real answer? Thanks! Steve
[ Steve-o  Jan 16, 2021 ]
1 answer
A
Yes use the separate connectors Crutchfield sends and connect them directly to the large speaker. Connect the wire on the crossover to 3" factory harness and the new plug to the 4" factory harness. This is for 8.5 premium sound system.
[ Tim  Jan 16, 2021 ]
Q
Will these work if I have the Alpine PSS-23WRA system already installed?
[ Jason  Dec 25, 2020 ]
4 answers
A
If you're referring to the upgraded factory Wrangler JL Alpine system...I read no. My system is the base 7in screen system and I upgraded to these sound bar speakers. Go to Alpine or Crutch for confirmation...these is also a recent convo string on the Facebook Wrangler JL page that was lead by a guy from Alpine. Hope this helps
[ MILLER  Dec 25, 2020 ]
A
Yes. I installed these speakers after the pss23wra. I've had to turn the manual bass control considerably lower than before. I reached out to Alpine to see if they had different recommended settings and they suggest the same amp settings either way.
[ JOHN  Dec 25, 2020 ]
A
I put them in a 2018 JL Rubicon with the Alpine system. You'll need to cut out original tweeter and woofer. Use the woofer plug to hook up new speakers. Plug for tweeter is not used. Huge difference in the sound! It's what Jeep should have had as an option to begin with.
[ DAVID  Dec 25, 2020 ]
A
Yes
[ JON  Dec 25, 2020 ]
Q
2020 Jeep Gladiator w/ 8.4 Premium Sound. Your own selector says it won't fit, but your articles say the 6.5 will fit? What exactly does one have to do to make them work the way they should?
[ Timothy  Jan 24, 2021 ]
1 answer
A
I have the alpine premium with the 8.4" and it's no different to install than the base speaker setup. Technically believe it or not the difference between the base and the expensive alpine upgrade is only a small amp and a subwoofer. The speakers themselves are exactly the same as the base model. To install you do need to cut out the old pods to mount these. Kit comes with a template and albeit I was super nervous to cut up my speaker bar it was incredibly easy with a super cheap air saw (ten bucks online or HF). Speakers look great and are night and day difference over stock.
[ John  Jan 24, 2021 ]
Q
I have a 2019 Jeep Wrangler JL with the Alpine premium sound system w/sub. Will these speakers work? I've read some say it will work and others that it won't. What is the real answer? Thanks! Steve
[ Steve-o  Jan 16, 2021 ]
1 answer
A
Yes use the separate connectors Crutchfield sends and connect them directly to the large speaker. Connect the wire on the crossover to 3" factory harness and the new plug to the 4" factory harness. This is for 8.5 premium sound system.
[ Tim  Jan 16, 2021 ]
Q
Will these work if I have the Alpine PSS-23WRA system already installed?
[ Jason  Dec 25, 2020 ]
4 answers
A
If you're referring to the upgraded factory Wrangler JL Alpine system...I read no. My system is the base 7in screen system and I upgraded to these sound bar speakers. Go to Alpine or Crutch for confirmation...these is also a recent convo string on the Facebook Wrangler JL page that was lead by a guy from Alpine. Hope this helps
[ MILLER  Dec 25, 2020 ]
A
Yes. I installed these speakers after the pss23wra. I've had to turn the manual bass control considerably lower than before. I reached out to Alpine to see if they had different recommended settings and they suggest the same amp settings either way.
[ JOHN  Dec 25, 2020 ]
A
I put them in a 2018 JL Rubicon with the Alpine system. You'll need to cut out original tweeter and woofer. Use the woofer plug to hook up new speakers. Plug for tweeter is not used. Huge difference in the sound! It's what Jeep should have had as an option to begin with.
[ DAVID  Dec 25, 2020 ]
A
Yes
[ JON  Dec 25, 2020 ]
SHOW MORESHOW LESS

Loading articles...

TOP