Contact us
Close contact box

Alpine X-W10D4

X-Series 10" subwoofer with dual 4-ohm voice coils

Item # 500XW10D4

Alpine redesigns their X-Series subwoofers to deliver even more impressive performance.

Alpine redesigns their X-Series subwoofers to deliver even more impressive performance.

Alana
Need help?
Contact our Virginia-based experts.

Item # 500XW10D4

Ships free

In stock
$399.95 each

Other options

Alana
Need help?
Contact our Virginia-based experts.

About the Alpine X-W10D4

Built to take it

Alpine redesigns their X-Series subwoofers to deliver even more impressive performance. The X-W10D4 10" subwoofer handles up to 900 watts RMS, so don't hesitate to give it plenty of juice. This rugged sub features a pulp/mica cone with a parabolic shape that maintains its rigidity and strength for outstanding response and accuracy. The big rubber surround supports the cone in the sub's cast aluminum frame, while Alpine's latest technology allows this sub to move an amazing amount of air (28mm Xmax, for you bass geeks out there) at very high levels while staying cool.

Built to take it

Alpine redesigns their X-Series subwoofers to deliver even more impressive performance. The X-W10D4 10" subwoofer handles up to 900 watts RMS, so don't hesitate to give it plenty of juice. This rugged sub features a pulp/mica cone with a parabolic shape that maintains its rigidity and strength for outstanding response and accuracy. The big rubber surround supports the cone in the sub's cast aluminum frame, while Alpine's latest technology allows this sub to move an amazing amount of air (28mm Xmax, for you bass geeks out there) at very high levels while staying cool.

Versatility

You can wire the dual 4-ohm voice coils to get the optimum performance from your amp, or to configure a custom setup with multiple subwoofers. The X-W10D4 works well in sealed and ported enclosures so you can choose what kind of bass you want to hear and feel.

Note: If you are wiring this DVC sub for lower impedance, make sure that your amp is compatible. 

READ LESS

Product highlights:

  • 10" subwoofer with dual 4-ohm voice coils
  • pulp/mica cone
  • large HAMR rubber surround
  • cast aluminum frame provides a rock-solid platform
  • handles up to 900 watts RMS (450 watts per coil)
  • peak power handling: 2700 watts
  • frequency response: 24-200 Hz
  • Xmax: 28mm
  • top-mount depth: 6-3/4"
  • grille not included
  • warranty: 1 year
  • Our 60-day money-back guarantee
  • MFR # X-W10D4

What's in the box:

  • One 10" Dual 4-ohm voice coil subwoofer
  • Grille (installed)
  • X-Series Subwoofer Application Guide (English/ French)
  • On-line product registration information (English/ French/ Spanish)
  • Warranty information (English/ French)
  • Important Notice! (English/ French)

Featured video:

Customer reviews

Loading reviews...

Alpine X-W10D4 reviews

Average review:

2 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

<< >>

More details on the Alpine X-W10D4

Pat M.

Product Research

Features
Enclosure Compatibility

Features

Dual Voice Coils: For system flexibility, the woofer has two 4Ω voice coils. When the voice coils are wired in parallel, the woofer presents a 2Ω load; when wired in series, the woofer presents an 8Ω load.

HAMR: The woofer features a High Amplitude Multi Roll (HAMR) Surround, made of rubber, that allows a large linear excursion and greater SPL. The HAMR design allows extreme excursions without sacrificing valuable cone area.

Dual Progressive Spider: The dual progressive spiders have integrated tinsel leads to ensure reliable and consistent control of the tinsel leads and eliminate any mechanical noise or interference often seen in high excursion cone designs.

Compound Radius Curve Pole Geometry: Alpine's Patented Compound Radius Curve pole geometry ensures a symmetrical magnetic field, while optimizing flux density to reduce distortion and further improve power handling and output.

Oversized Voice Coil: The oversized (65mm) dual voice coils are wound on an aluminum former.

Terminals: The set screw terminals are all located on one side of the woofer. The terminals will accept bare wire up to 8 gauge.

Jumper Plug: A jumper plug on the terminal block allows you to easily wire the voice coils in parallel (for a 2Ω load) or series (for an 8Ω load).

Enclosure Compatibility

Sealed Box Volume: The recommended sealed box volume ranges from 0.52 ft³ to 0.87 ft³, with 0.67 ft³ being the ideal size. (Most volumes in the manual are given as net, before accounting for the displacement of the subwoofer when installed.)

Ported Box Volume: The recommended ported box volume ranges from 1.18 ft³ to 2.08 ft³. The ideal size is 1.68 ft³, using a slot port measuring 3.75" (Width) x 4" (Height) x 18" (Length), resulting in a tuning frequency of 35 Hz. (Most volumes in the manual are given as net, before accounting for the displacement of the subwoofer and slot port.)

Loading accessories...

Customer Q&A

Q
Crutchfield asked: Why did you buy this?
A
Power handling capabilities and Xmax [ Justice  Sep 14, 2018 ]

3 questions already asked

Q
What is the subwoofer displacement of the 10"?
[ Stephen  May 24, 2019 ]
1 answer
A
Its displacement volume in a sealed box is 0.732 m^3 My Bio: https://www.crutchfield.com/bio/Paul
[ Paul  Jun 03, 2019 ]  Staff
Q
Is the 10 inch alpine x series enough for 500 watts mono alpine amp?
[ Eriel  May 07, 2019 ]
1 answer
A
To be sure we pull up the exact models of amp and sub you're in question of, I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help answer your question.
[ Jess  May 19, 2019 ]  Staff
Q
What is the difference between alpine Type 12inch and alpine type x 10inch? I read the info they both seem to be the same
[ Franky  Feb 26, 2019 ]
1 answer
A
Thanks for your question. For information on comparing two or more models I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences and help you make the best choice for your system and your budget.
[ Krissy  Mar 01, 2019 ]  Staff

Loading articles...

TOP