About the Alpine X-W10D4
Built to take it
Built to take it
Alpine redesigns their X-Series subwoofers to deliver even more impressive performance. The X-W10D4 10" subwoofer handles up to 900 watts RMS, so don't hesitate to give it plenty of juice. This rugged sub features a pulp/mica cone with a parabolic shape that maintains its rigidity and strength for outstanding response and accuracy. The big rubber surround supports the cone in the sub's cast aluminum frame, while Alpine's latest technology allows this sub to move an amazing amount of air (28mm Xmax, for you bass geeks out there) at very high levels while staying cool.
You can wire the dual 4-ohm voice coils to get the optimum performance from your amp, or to configure a custom setup with multiple subwoofers. The X-W10D4 works well in sealed and ported enclosures so you can choose what kind of bass you want to hear and feel.
Note: If you are wiring this DVC sub for lower impedance, make sure that your amp is compatible.
- 10" subwoofer with dual 4-ohm voice coils
- pulp/mica cone
- large HAMR rubber surround
- cast aluminum frame provides a rock-solid platform
- handles up to 900 watts RMS (450 watts per coil)
- peak power handling: 2700 watts
- frequency response: 24-200 Hz
- Xmax: 28mm
- top-mount depth: 7-3/8"
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # X-W10D4
What's in the box:
- One 10" Dual 4-ohm voice coil subwoofer
- Grille (installed)
- X-Series Subwoofer Application Guide (English/ French)
- On-line product registration information (English/ French/ Spanish)
- Warranty information (English/ French)
- Important Notice! (English/ French)
Scratch & Dent items may be missing non-essential accessories. In some cases the manufacturer's accessories have been replaced with generic equivalents.
See the difference between "Open Box" and "Scratch & Dent" Outlet items
Alpine X-W10D4 reviews
Thanks for submitting your review
More details on the Alpine X-W10D4
Features & specs
|Impedance||2 ohms or 8 ohms|
|Ideal Sealed Box Volume (cubic feet)||0.67|
|Ideal Ported Box Volume (cubic feet)||1.68|
|Port diameter (inches)||N/A|
|Port length (inches)||N/A|
|Dual Voice Coil||Yes|
83 dB at 1 watt |
|Frequency Response||26 - 200 Hz|
|Max RMS Power Handling||900|
|Peak Power Handling (Watts)||2700|
|Top Mount Depth (inches)||7 3/8|
|Bottom Mount Depth (inches)||N/A|
|Cutout Diameter or Length (inches)||9|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
Dual Voice Coils: For system flexibility, the woofer has two 4Ω voice coils. When the voice coils are wired in parallel, the woofer presents a 2Ω load; when wired in series, the woofer presents an 8Ω load.
HAMR: The woofer features a High Amplitude Multi Roll (HAMR) Surround, made of rubber, that allows a large linear excursion and greater SPL. The HAMR design allows extreme excursions without sacrificing valuable cone area.
Dual Progressive Spider: The dual progressive spiders have integrated tinsel leads to ensure reliable and consistent control of the tinsel leads and eliminate any mechanical noise or interference often seen in high excursion cone designs.
Compound Radius Curve Pole Geometry: Alpine's Patented Compound Radius Curve pole geometry ensures a symmetrical magnetic field, while optimizing flux density to reduce distortion and further improve power handling and output.
Oversized Voice Coil: The oversized (65mm) dual voice coils are wound on an aluminum former.
Terminals: The set screw terminals are all located on one side of the woofer. The terminals will accept bare wire up to 8 gauge.
Jumper Plug: A jumper plug on the terminal block allows you to easily wire the voice coils in parallel (for a 2Ω load) or series (for an 8Ω load).
Sealed Box Volume: The recommended sealed box volume ranges from 0.52 ft³ to 0.87 ft³, with 0.67 ft³ being the ideal size. (Most volumes in the manual are given as net, before accounting for the displacement of the subwoofer when installed.)
Ported Box Volume: The recommended ported box volume ranges from 1.18 ft³ to 2.08 ft³. The ideal size is 1.68 ft³, using a slot port measuring 3.75" (Width) x 4" (Height) x 18" (Length), resulting in a tuning frequency of 35 Hz. (Most volumes in the manual are given as net, before accounting for the displacement of the subwoofer and slot port.)
The Alpine X-W10D4 replaces these items
3 questions already asked