About the Crime Guard DS2
If your car has manual door locks, you can still wire the driver's door (or multiple doors) to automatically lock and unlock when you arm and disarm your Crime Guard security system. The DS-2 actuator comes with a 9" backstrap, 10" push arm, screws, speed clips and attaching block.
One actuator is required for each door you'd like to control. The DLS3R door lock dual-relay kit is also required. (One DLS3R is all you need, regardless of how many actuators you install.)
Thanks for submitting your review
More details on the Crime Guard DS2
Actuator works on reversing polarity.
For Lock (Plunger pulls in): Blue wire needs ground, Green wire needs 12V
For Unlock (Plunger pushes out): Blue wire needs 12V, Green wire needs ground
Note: One actuator is needed for each door. If alarm or module not equipped w/ door lock relays, then one 514DLS3R or two E5000 relays (total, not per door) are required for install.