About the Crime Guard DS2.4
Want to power up your car's manual locks? Wire these Crime Guard DS2.4 door lock actuators to your manual car door locks, and you'll be able to lock and unlock your car doors automatically with your Crime Guard remote.
Each DS2.4 actuator comes with a 9" backstrap, 10" push arm, screws, speed clips and attaching block. You'll need one actuator for each door you'd like to control. You'll also need one DLR-U door lock module, no matter how many actuators you install. Warranty: 30 days.
Important Note: If you know how to use a multimeter and have experience working with your vehicle's electrical system, you should be able to install this type of door lock system. If you're unfamiliar with car security systems, please call us at 1-888-955-6000 to discuss this installation.
What's in the box:
- DS-2.4 power door lock actuator with two attached 7" wires (each wire has a male bullet connectors)
- 9.625" Linkage rod
- 9" Metal mounting strap
- Four 1" Self-tapping screws
- 3 Self-tapping screws (length=1")
- Linkage rod clamp
- Speed clip
Crime Guard DS2.4 reviews
Thanks for submitting your review
More details on the Crime Guard DS2.4
Overview: This item is a door lock actuator, which can be used along with an aftermarket alarm or door lock module to convert your vehicle's manual door locks into powered door locks. One actuator is needed for each door. If your alarm or door lock module is not equipped with door lock relays, then two E5000 relays (item 120E5000), or one 514DLS3R, will be required for installation.
Reverse Polarity Operation: This actuator has only two electrical connections; one wire is blue and the other wire is green. The movement of the plunger depends on which wire receives power and which receives ground:
- Lock (plunger pulls in): Blue wire needs ground, Green wire needs +12V
- Unlock (plunger pushes out): Blue wire needs +12V, Green wire needs ground
The Crime Guard DS2.4 replaces these items