About the Omegalink OL-HRN-RS-NI4
Simplify your remote start installation
Omegalink's OL-HRN-RS-NI4 T-harness connects an Excalibur remote start system to your select Nissan or Infiniti vehicle. This T-harness plugs into your vehicle's electrical databus system, allowing you to start and stop the engine remotely, and control some basic factory security functions as well. Some wiring may be required — one to four connections, typically. Also, in most applications your remote start system will require a digital immobilizer bypass module, like Omegalink's OL-MDB-ALL, for full remote start functionality. You can identify your vehicle in our fit guide to see if this harness is compatible. Warranty: 1 year.
What's in the box:
- 26" Main T-harness (inline 30A ATO fuse)
- 5" 9-Wire immobilizer adapter harness
- Two 3-pin jumper loops (immobilizer selection)
- Online installation instructions link
Thanks for submitting your review
More details on the Omegalink OL-HRN-RS-NI4
Overview: The Excalibur (Omega) OL-HRN-RS-NI4 installation harness is designed to simplify the installation of your Excalibur 10-70 Series remote start system (sold separately) into select 2004 - up Nissan, Infinity, Chevrolet, and Suzuki vehicles with standard key or push-to-start ignition systems.
Installation: The Excalibur kit includes various vehicle-specific harnesses designed to provide a direct connection into your compatible vehicle while connecting to the remote start module on the other end, saving you considerable time and effort. The main T-harness interfaces into the ignition system, providing direct connections for the Starter, Ignition, and Accessory wires. Other functions may include Door Lock operation, Parking Light flash, Horn Honk, as well as Door, Hood, and Trunk pin switch activation (individual functions will vary, please see vehicle specific information for details).
Note: The included harnesses will take care of the bulk of required wiring, but some hardwiring into the vehicle's wiring system will still be required.
Remote Start Compatibility: The Excalibur harness kit is designed to plug directly into any Excalibur 10-70 Series remote start system, including; RS-272, RS-370, RS-375, and RS-475-3D. The Excalibur harness kit can also be used with other remote start systems, but will not be a direct plug-in (splicing required).
Immobilizer Bypass Compatibility: The Excalibur OL-HRN-RS-NI4 harness kit can be used with the following Excalibur, iDatalink and Flashlogic immobilizer bypass modules (all sold separately):
Excalibur: OL-MDB-ALL, OL-BLADE-AL64
iDatalink: ADS-ALCA (adapter harness included), ADS-BLADE AL*
Flashlogic: FLCAN (adapter harness included), FLCART*
*ADS-BLADE AL and FLCART are not compatible with Excalibur remote start systems.