About the Salamander Designs Synergy System Model 247
Low and wide
Low and wide
The Salamander Designs Synergy Model 247 offers plenty of storage. It's a great choice for high-performance home theater systems with several components. Anodized aluminum posts and wood veneer surfaces give this cabinet an attractive, modern appearance.
Made for A/V gear
The spacious cabinet top can support a TV up to 90” and weighing up to 350 lbs. The doors feature hardwood frames and perforated metal panels that allow IR signals from your remote to pass through, as well as air to ventilate your gear. They also effectively hide the gear behind them. The hinges are designed to extend so you can fully open each door.
Four compartments, each with an adjustable shelf, provide plenty of room for your components and other gear. The removable back panel gives you easy access to your gear for wiring.
The Model 247 can be assembled a number of ways. You can install the doors on any or all the compartments, or leave them off. You can place the Model 247 on the floor, or remove the non-marking feet and mount the unit on the wall with optional mounting accessory (not included). Each compartment has an infinitely adjustable shelf. The supports slide along the aluminum frame, so you can move the shelf to the exact height you want — not where the next peg holes happen to be.
Good for the environment and the country
Salamander Designs uses only hardwoods harvested from managed forestry programs. Their frames are made from recycled aluminum, with environmentally friendly coatings and stains. And each Model 247 is built in the USA.
- for use with TVs up to 90"
- cabinet top:
- 87"W x 19-3/4"D
- supports up to 350 lbs.
- four component compartments (each):
- interior dimensions 19-3/4"W x 17-3/4"H x 18"D
- adjustable shelf: 19-3/4"W x 18-1/2"D
- adjustable shelf supports up to 75 lbs.
- removable compartment doors:
- hinges extend to open doors fully
- perforated metal panels
- ventilation openings to keep components cool
- removable back panel for easy access
- cabinet can be wall mounted (must be mounted to wall studs or anchored to a brick, block, or concrete wall)
- removable non-marking leveling feet
- 87"W x 21"H x 19-3/4"D
- warranty: limited lifetime
- Our 60-day money-back guarantee
- assembly required
- MFR # 247M/A
What's in the box:
- Bottom shelf
- 4 Adjustable shelves
- 4 Doors
- 10 Posts
- 2 Side-panels
- 4 Rear-panels
- 4 Door pulls (4 screws)
- 8 Door hinges (16 screws)
- 10 Feet
- 10 Hex-nuts
- 10 Washers
- 16 Shelf-pegs
- 4 Rubber stops
- 8 Connector-bolts
- 16 Thumb-screws/nuts
- Assembly Instructions
Thanks for submitting your review
More details on the Salamander Designs Synergy System Model 247
Features & specs
|Number of Shelves||9|
|Number of Adjustable Shelves||4|
|Number of Drawers||None|
|Stand Weight Limit||950 lbs|
|TV Shelf Weight Limit||350 lbs|
|TV Shelf Width||87|
|TV Shelf Depth||19-3/4|
|Parts Warranty||Limited Lifetime|
|Labor Warranty||Limited Lifetime|