About the Salamander Designs Flexo 100 Medium
Single-stud mounting
Single-stud mounting
The Salamander Designs Flexo100 Medium requires only one wall stud for mounting, giving you lots of placement options. The mount holds your TV just 2-5/8" from the wall, and can tilt 15° up or down.
The Flexo 100 Medium can support TVs with screen sizes between 23" and 47" and weighing up to 100 lbs. The mount comes with extension wings for greater TV compatibility.
Product highlights:
- designed for TVs 23"-47"
- supports up to 100 lbs.
- fits VESA mounting hole patterns from 100 x 100mm to 500 x 300mm
- holds TV 2-5/8" from wall
- tilt range: ±15°
- single-stud mounting
- anti-theft lock included
- 15-3/4"W x 10-13/16"H x 2-5/8"D
- warranty: 5 years
- MFR # FX100/M
What's in the box:
Salamander Designs Flexo 100 Medium owner's manual
- Wall-bracket
- 2 TV brackets
- 2 Extension brackets
- Four M4 x 12mm screws
- Four M4 x 25mm screws
- Four M5 x 12mm screws
- Four M5 x 25mm screws
- Four M6 x 12mm screws
- Four M6 x 25mm screws
- Four M8 x 15mm screws
- Four M8 x 30mm screws
- 6 Lag-screws
- Six M8 x 16mm screws
- Four M5 washers
- Twelve M8 washers
- Four M4/M5 spacers
- Four M6/M8 spacers
- 6 Hex-nuts
- 6 Concrete-anchors
- 5 Hex-keys
- Pad-lock
- 3 Keys
- Installation Manual
Customer reviews for Salamander Designs Flexo 100 Medium
Loading...
Loading reviews...
Average review:
3.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Salamander Designs Flexo 100 Medium
Features & specs
Features | ||
---|---|---|
Mount Type | Wall Mount | |
Motion | ||
Tilt | Yes | |
Swivel | No | |
Extend/Retract | No | |
Fixed | No | |
Roll (Level) Adjustment | No | |
Mounting Details | ||
Wood Stud (Single) | Yes | |
Wood Stud (Dual, 16-inch) | No | |
Wood Stud (Dual, 24-inch) | No | |
Concrete Block-compatible | Yes | |
Recessed Housing | No | |
Outdoor-rated | No | |
Motorized | No |
Product Research
Features
TV Compatibility: The Salamander Designs FLEXO 100 Medium wall-mount bracket supports 23" to 47" flat-panel TVs that weigh up to 100 lbs. The TV must meet the following VESA and screw size requirements.
- VESA Sizes: 100x100 to 500x300
- Screw Size: M4, M5, M6, or M8
Note: Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.
Tilt Design: The FLEXO 100 Medium lets you easily tilt your TV up or down 15-degrees to reduce glare and improve line-of-sight with the TV screen. Your TV will sit approximately 2.625" from the wall when the projector's tilt mechanism is in the neutral position.
Single Stud Installation: The FLEXO 100 Medium TV wall-mount bracket mounts to a single wood stud. Mounting hardware is included for wood stud and masonry installations. Tools required for installation include -
- Drill
- 3/16" bit (wood), 3/8" bit (masonry)
- Stud finder
- Level
- Pencil
Lock & Keys: An included pad-lock and 3 keys provide extra security.
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...