About the Salamander Designs Synergy Model 237
Three component compartments
Storage to spare
The Salamander Design Synergy System Model 237 gives you three spacious compartments to store your home theater gear. The cabinet's sturdy anodized aluminum frame and select hardwood panels ensure it can handle the brawniest components you own.
Three component compartments
The cabinet top can support a TV up to 70” and weighing up to 300 lbs. The door panels have perforated metal panels that allow IR signals from your remote to pass through, as well as air to ventilate your gear. They also effectively hide the gear behind them. The doors feature soft-close dampeners and hinges that extend so you can fully open each door.
The Model 237 can be assembled in a number of ways. You can install the doors onto the compartments, or leave them off entirely. The Model 237 comes with three adjustable shelves. You can place two or three in one compartment, or just use one in each of the three compartments, or two shelves in one compartment and one in another. The supports slide along the aluminum frame, making the shelves infinitely adjustable.
Good for the environment and the country
Salamander Designs uses only hardwoods harvested from managed forestry programs. Their frames are made from recycled aluminum, with environmentally friendly coatings and stains. And each Model 237 is built in the USA.
- for use with TVs up to 75"
- 3 compartments for components
- cabinet top:
- 66-3/4"W x 19-3/4"D
- supports up to 350 lbs.
- 3 component compartments (each):
- interior dimensions 19-3/4"W x 17-3/4"H x 18"D
- supports up to 75 lbs.
- 3 adjustable shelves (each):
- 19-3/4"W x 18-1/2"D
- supports up to 75 lbs.
- select hardwood with a black finish
- removable compartment doors:
- slow-close dampeners
- hinges extend to open doors fully
- perforated metal panels
- ventilation openings to keep components cool
- removable back panel for easy access
- black anodized aluminum frame
- removable non-marking leveling feet
- 66-3/4"W x 21"H x 19-3/4"D
- warranty: limited lifetime
- Our 60-day money-back guarantee
- assembly required
- MFR # SB237B/B
What's in the box:
Salamander Designs Synergy Model 237 owner's manual
- Top Shelf
- Bottom shelf
- 3 Adjustable shelves
- 2 Side-panels
- 3 Rear-panels
- 8 Posts
- 3 Doors
- 4 Hinges
- 3 Door pulls (3 screws)
- 8 Joint-connector bolts
- 12 Shelf-pegs
- 8 Feet
- 8 Washers
- 8 Nuts
- 12 Thumb-nuts/screws
- 3 Rubber stops
- Assembly Instructions
Salamander Designs Synergy Model 237 reviews
Thanks for submitting your review
This review was collected as part of a promotion
More details on the Salamander Designs Synergy Model 237
Features & specs
|Number of Shelves||7|
|Number of Adjustable Shelves||3|
|Number of Drawers||None|
|Stand Weight Limit||800 lbs|
|TV Shelf Weight Limit||350 lbs|
|TV Shelf Width||65-3/4|
|TV Shelf Depth||19-3/4|
|Parts Warranty||Limited LIfetime|
|Labor Warranty||Limited Lifeitme|
Synergy Series AV stand: The Salamander Designs Synergy series SB237 is a low and wide AV stand with an open top-shelf and three enclosed shelf compartments, so it will hold plenty of your components and accommodate a TV up to 75".
Real Wood & MDF Construction: The Synergy series AV stand's top shelf & bottom base are 1-1/8" thick and consist of real wood veneers over an MDF core with a real wood lumber edge. The Doors are made of solid hardwood. These woods are a select grade of American hardwood and finished for durability and low maintenance.
Note: Wood being a natural product is prone to different grain patterns which can lead to slight variations in color and shade.
Anodized Aluminum Posts: At the heart of the Synergy series AV stand are unique square-shaped extruded aluminum support posts. Theses posts are used simultaneously as an external cabinet skeleton for supporting top, bottom, side, and back panels; as well as an internal skeleton for supporting shelves and drawers (sold separately).
Audiophile-Grade: The Salamander Designs Synergy series AV stand is designed with the Audiophile in mind. It is constructed of dissimilar materials which reduce transmission of performance robbing resonance. This will provide ample component isolation to enhance the sound quality of the system.
Solid Wood Door Frames w/ Perforated Steel Inserts: The Synergy series AV stand features solid wood door frames with perforated steel inserts and soft-close dampeners. The perforated door panels permit IR signals to passthrough, add ventilation, and hide your components. The snap-on hinges fully extend and are removable for better in-cabinet access. The doors can be hung so they swing to the left or right.
Open & Enclosed Shelving: The Salamander Designs Synergy series SB237 AV stand features a top shelf, three fixed bottom shelves, and three adjustable middle shelves. The three fixed bottom shelves and three adjustable middle shelves are hidden by hardwood frame doors with perforated steel inserts.
- Top Shelf: The top shelf measures 65.75" (w) x 21" (h) and 19.75" (d). It can support up to a 75" flat-panel TV that weighs up to 350 lbs.
- Enclosed Shelving: The AV stand features three enclosed compartments, hidden behind three hardwood frame doors with perforated steel inserts. Each compartment consists of a fixed bottom shelf and an infinite adjustable middle shelf. Each compartment space measures 19.75" (w) x 17.75" (h) x 18" (d). Each shelf can hold up to 75 lbs.
Removable Back Panels: Removable back panels permit fast, easy access to components and wiring. Wires can be easily hidden with the use of the rear panel by allowing cables to pass over and under them. There is approximately 1" of space between each shelf and the back panels, permitting wires and cables to pass-through.
Leveling Feet: The Salamander Designs Synergy series SB237 is fitted with heavy-duty, non-marking, leveling feet.
Optional Accessories: Optional accessories enhance functionality and add greater design flexibility. Choose from Casters, Adjustable Shelves, Pull-Out Shelves, Universal Storage Trays, Media Trays, and/or Accent Lightning (all sold separately).
Built-In The USA + Lifetime Warranty: All of the Salamander Designs Synergy series cabinets are hand-built in the USA and come with a limited lifetime warranty.
1 question already asked