About the Salamander Designs Synergy Model 337
Storage to spare
Storage to spare
The Salamander Design Synergy System Model 337 gives you three tall, spacious compartments to store your home theater gear. The cabinet's sturdy anodized aluminum frame and select hardwood panels ensure it can handle the brawniest components you own.
Three component compartments
The cabinet top can support a TV up to 70” and weighing up to 350 lbs. The door panels have perforated steel panels that allow IR signals from your remote to pass through, as well as air to ventilate your gear.
They also effectively hide the equipment behind them. The doors feature soft-close dampeners and extendable hinges so you can fully open each door.
Modular options
The Model 337 can be assembled a number of ways. You can install the doors onto the compartments, or leave them off entirely. The Model 337 comes with six adjustable shelves. You can place two or three in one compartment, or use two in each of the three compartments, any other combination. The supports slide along the cabinet's aluminum frame, making the shelves infinitely adjustable.
Good for the environment and the country
Salamander Designs uses only hardwoods harvested from managed forestry programs. Their frames are made from recycled aluminum, with environmentally friendly coatings and stains. And each Model 337 is built in the USA.
Product highlights:
- for use with TVs up to 70"
- 3 compartments for components
- cabinet top:
- 65-3/4"W x 19-3/4"D
- 3 component compartments (each):
- interior dimensions 19-3/4"W x 27-3/4"H x 18"D
- supports up to 75 lbs.
- 6 adjustable shelves (each):
- 19-3/4"W x 18-1/2"D
- supports up to 75 lbs.
- select hardwood with a black finish
- removable compartment doors:
- slow-close dampeners
- hinges extend to open doors fully
- perforated steel panels
- ventilation openings to keep components cool
- removable back panel for easy access
- black anodized aluminum frame
- non-marking leveling feet
- 65-3/4"W x 31"H x 19-3/4"D
- warranty: limited lifetime
- Our 60-day money-back guarantee
- assembly required
- MFR # SB337C/B
What's in the box:
- Top Shelf
- Bottom shelf
- 6 Adjustable shelves
- 2 Side-panels
- 3 Rear-panels
- 8 Posts
- 3 Doors
- 4 Hinges
- 3 Door pulls (3 screws)
- 8 Joint-connector bolts
- 24 Shelf-pegs
- 8 Feet
- 8 Washers
- 8 Nuts
- 12 Thumb-nuts/screws
- 3 Rubber stops
- Wrench
- Hex-key
- Assembly Instructions
Reviews
Customer reviews
Loading reviews...
Salamander Designs Synergy Model 337 reviews
Average review:
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Salamander Designs Synergy Model 337
Features & specs
| General Features | ||
|---|---|---|
| Type | TV Stand | |
| Stand Style | Stand | |
| Color | Cherry | |
| Number of Shelves | 10 | |
| Number of Adjustable Shelves | 6 | |
| Number of Drawers | None | |
| Assembly Required | Yes | |
| Main Materials |
Hardwood MDF | |
| Wire Management | Yes | |
| Height (inches) | 31 | |
| Depth (inches) | 19-3/4 | |
| Stand Weight Limit | 1925 lbs | |
| TV Shelf Weight Limit | 350 lbs | |
| TV Shelf Width | 65-3/4 | |
| TV Shelf Depth | 19-3/4 | |
| Parts Warranty | Limited LIfetime | |
| Labor Warranty | Limited Lifeitme | |
Product Research
Features
Synergy Series AV stand: The Salamander Designs Synergy series SB337 is a low and wide AV stand with an open top-shelf and three enclosed shelf compartments, so it will hold plenty of your components and accommodate a TV up to 75".
Real Wood & MDF Construction: The Synergy series AV stand's top shelf & bottom base are 1-1/8" thick and consist of real wood veneers over an MDF core with a real wood lumber edge. The Doors are made of solid hardwood. These woods are a select grade of American hardwood and finished for durability and low maintenance.
Note: Wood being a natural product is prone to different grain patterns which can lead to slight variations in color and shade.
Anodized Aluminum Posts: At the heart of the Synergy series AV stand are unique square-shaped extruded aluminum support posts. Theses posts are used simultaneously as an external cabinet skeleton for supporting top, bottom, side, and back panels; as well as an internal skeleton for supporting shelves and drawers (sold separately).
Audiophile-Grade: The Salamander Designs Synergy series AV stand is designed with the Audiophile in mind. It is constructed of dissimilar materials which reduce transmission of performance robbing resonance. This will provide ample component isolation to enhance the sound quality of the system.
Solid Wood Door Frames w/ Perforated Steel Inserts: The Synergy series AV stand features solid wood door frames with perforated steel inserts and soft-close dampeners. The perforated door panels permit IR signals to passthrough, add ventilation, and hide your components. The snap-on hinges fully extend and are removable for better in-cabinet access. The doors can be hung so they swing to the left or right.
Open & Enclosed Shelving: The Salamander Designs Synergy series SB337 AV stand features a top shelf, three fixed bottom shelves, and three adjustable middle shelves. The three fixed bottom shelves and three adjustable middle shelves are hidden by hardwood frame doors with perforated steel inserts.
- Top Shelf: The top shelf measures 65.75" (w) x 21" (h) and 19.75" (d). It can support up to a 75" flat-panel TV that weighs up to 350 lbs.
- Enclosed Shelving: The AV stand features three enclosed compartments, hidden behind three hardwood frame doors with perforated steel inserts. Each compartment consists of a fixed bottom shelf and an infinite adjustable middle shelf. Each compartment space measures 19.75" (w) x 17.75" (h) x 18" (d). Each shelf can hold up to 75 lbs.
Removable Back Panels: Removable back panels permit fast, easy access to components and wiring. Wires can be easily hidden with the use of the rear panel by allowing cables to pass over and under them. There is approximately 1" of space between each shelf and the back panels, permitting wires and cables to pass-through.
Leveling Feet: The Salamander Designs Synergy series SB337 is fitted with heavy-duty, non-marking, leveling feet.
Optional Accessories: Optional accessories enhance functionality and add greater design flexibility. Choose from Casters, Adjustable Shelves, Pull-Out Shelves, Universal Storage Trays, Media Trays, and/or Accent Lightning (all sold separately).
Built-In The USA + Lifetime Warranty: All of the Salamander Designs Synergy series cabinets are hand-built in the USA and come with a limited lifetime warranty.
Loading accessories...
Customer Q&A
Loading articles...
