About the PAC CHYRVD Rear Seat Video Adapter
If you're planning to upgrade your Chrysler, Dodge, or Jeep vehicle's DVD video "infotainment" system, this "plug and play" cable will make the task a whole lot easier.
PAC's CHYRVD cable sends an audio/video signal output from your factory radio to an aftermarket monitor. You can also use it with a PAC C2R-CHY4 or RP4-CH11 interface module if you want to replace your factory radio while retaining your vehicle's factory rear seat entertainment system. If your vehicle is equipped with a factory rear-view camera, this cable will transmit those images.
Please enter your vehicle information or call an Advisor at 1-888-955-6000 to find out if this adapter is compatible with your vehicle. Warranty: 1 year.
What's in the box:
PAC CHYRVD Rear Seat Video Adapter owner's manual
- Rear screen & VES DVD retention cable (for Chrysler/Dodge/Jeep vehicles)
- Installation Instructions
Customer reviews for PAC CHYRVD Rear Seat Video Adapter
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the PAC CHYRVD Rear Seat Video Adapter
Product Research
Features
PAC CHYRVD: The PAC CHYRVD adapter cable provides an audio/video signal output from a Chrysler/Dodge/Jeep factory radio to an aftermarket monitor. The PAC CHYRVD adapter cable can also be used with the PAC C2R-CHY4 or RP4-CH11 interface (both sold separately) to replace a Chrysler/Dodge/Jeep factory radio with an aftermarket head unit, and still retain the factory VES monitor, IR system, and back-up camera. In addition, the PAC CHYRVD adapter cable can be used in conjunction with the PAC RP4-CH11 interface (sold separately) to retain factory Rear System Entertainment (RSE).
Adding Aftermarket Head Unit to Factory Entertainment System: The CHYRVD adapter cable routes the A/V outputs of the Chrysler/Dodge/Jeep factory VES DVD player (if present) to your aftermarket head unit or feeds video to the OEM Rear Seat Entertainment (RSE) LCD from the aftermarket head unit. If your vehicle is equipped with a factory rear-view camera, this adapter will also transmit those images. This installation requires the use of the PAC C2R-CHY4 or RP4-CH11 interface (sold separately). Your Chrysler/Dodge/Jeep vehicle must be equipped with a factory overhead LCD and IR system, in which the DVD player was either part of the in-dash factory radio or a separate stand alone unit.
- Vehicles Equipped w/ Factory Stand Alone DVD Player & Rear Monitor: Your aftermarket head unit must be equipped with A/V input for vehicles equipped with a stand alone factory VES DVD player. Simply connect the cables labeled "Audio/Video output from DVD Player" on the CHYRVD to an A/V input on the aftermarket head unit. The cables labeled "Audio Video output to Overhead LCD" will not be used in this application as A/V cannot be fed from the aftermarket head unit to the RSE (A/V from the OEM VES DVD will still pass to the RSE).
- Vehicles Equipped w/ Factory Rear Monitor only (no Stand Alone DVD player): Your aftermarket head unit must be equipped with an A/V output for vehicles not equipped with a stand alone VES DVD player (rear screen only). In this case, connect the A/V outputs of the aftermarket head unit to the cables labeled "Audio/Video input to Overhead LCD" of the CHYRVD. If you wish to use the rear panel A/V inputs of your aftermarket head unit, you must disconnect the factory wires from them, then connect and run your own RCAs into the aftermarket head unit's A/V input.
Adding Aftermarket Monitors to Factory Entertainment System: The CHYRVD adapter cable allows aftermarket monitors and IR headphones to be connected to the factory entertainment system of select Chrysler/Dodge/Jeep vehicles. Your Chrysler/Dodge/Jeep vehicle must be equipped with a stand-alone factory VES DVD player. The CHYRVD cable is connected behind the factory head unit. Connect the cables labeled "Audio/Video output from DVD Player" on the CHYRVD to the aftermarket monitor video input. If installing aftermarket IR headphones, connect the Red and White RCAs to the audio input of the aftermarket IR headphones. The cables labeled "Audio/Video output to Overhead LCD" will not be used in this application.
Vehicle Compatibility: The PAC CHYRVD adapter cable is compatible with the following 2008-2013 Chrysler/Dodge/Jeep vehicles (as of 6/29/2017).
Make | Model | Year |
---|---|---|
Chrysler | Town & Country | 2008-up |
Dodge | Durango | 2008-2013 |
Grand Caravan | 2008-up | |
Journey | 2009-2010 | |
Ram 1500 | 2009-2012 | |
Ram 2500/3500 | 2010-2012 | |
Jeep | Grand Cherokee | 2008-2013 |
Volkswagen | Routan | 2009-2013 |
Note: Please consult Crutchfield's Outfit My Car to see if your vehicle is compatible and what additional accessories will be needed.
Loading...
Loading accessories...
Customer Q&A
3 questions already asked
Loading...
Loading articles...
Installed in a 2008 Town & Country. Excellent! Idiot-proof to install, and everything works just as if the head unit had come from the factory.
Douglas from Spartanburg, SC