About the Russound SS-6.2 (factory refurbished)
Save on this factory refurbished speaker selector
This factory refurbished version of Russound's SS-6.2 speaker selector saves you some money, and it comes complete with a two-year factory warranty. You want tunes playing on the patio, in the living room and kitchen, but not in the bedrooms where people are calling it a day. Now you can have your music right where you want it. This speaker selector gives you flexible switching options for multi-room applications. It allows you to connect as many as six pairs of speakers and play them all simultaneously without damaging your equipment. Create a whole-house system so you can listen to music in every room. Impedance-matching protection circuitry ensures that your amplifier or receiver operates at a safe load.
- play up to 6 pairs of speakers simultaneously
- power handling: 70 watts per channel
- accepts up to 12-gauge speaker wire
- includes room/speaker labels
- 11-1/2"W x 1-13/16"H x 6-1/4"D
- warranty: 2 years
- Our 60-day money-back guarantee
- Please note: The manufacturer uses generic packaging for this refurbished item
- MFR # 9999-853074
What's in the box:
- Refurbished speaker selector
- Instruction Manual
- Sheet of 52 room labels and 8 blanks
Russound SS-6.2 (factory refurbished) reviews
Thanks for submitting your review
More details on the Russound SS-6.2 (factory refurbished)
Overview: The Russound SS-6.2 Speaker Selector allows you to switch up to six speaker pairs connected to a stereo amplifier. Each pair of speakers can be turned on or off through individual front panel switches. It provides switchable built-in impedance matching, or can be used with impedance matching volume control. The SS-6.2 is designed for use with 8-ohm loudspeakers.
Impedance Matching Protection: When used with multiple speaker pairs, the impedance matching circuitry lets you operate the system safely with automatic overload protection. When connecting more than one pair of 8 ohm speakers to the speaker selector, the rear panel impedance switch should be placed in the "In" position. If using impedance matching volume controls (such as ALTx-2 or LPTx-2), the switch should be in the "Bypass" position.
Amplifier Requirements: When using internal impedance matching (switch set to "In") a 4-ohm stable amplifier is required. When using external impedance matching volume controls (switch set to "Bypass"), a 4 to 8 ohm stable amplifier may be used. You should use only the Amplifier "A" speaker outputs when the SS-6.2 is used. "B" speaker outputs should not be used.
Connections: The SS-6.2 features spring clip speaker terminals that can accommodate up to 12-gauge wire. For most applications, stranded 16-gauge speaker wire is recommended. For runs of over 100 feet, 14-gauge is recommended, while 12-gauge can be used for runs of up to 200 feet.
Performance: The speaker selector is designed for use with amplifiers with a power output of up to 100 watts per channel RMS (200 watts per channel peak. The frequency response is 20Hz to 20kHz (+/- 0dB).
Room Labels: The SS-6.2 comes with a sheet of non-adhesive room labels which slide into a groove in the front panel. A total of 52 labels and 8 blanks are included.