About the StreetGlow Undercar Neon Kit
Cast an ethereal glow on the pavement below with a StreetGlow Blue Line Series neon undercar kit!
No matter what color you choose, undercar neon will dramatically change your vehicle's appearance and definitely turn some heads, too. The soft glow created by these tubes looks simply amazing. Each kit contains four neon tubes: two 48-inch tubes for the sides of your vehicle, and two 30-inch tubes for the front and rear. Each tube features its own power transformer and gets wired to an included distribution block, which is in turn wired to power and ground. An illuminated dash- or console-mountable switch lets you turn the tubes on and off whenever necessary.
The tubes are made from durable lexan and have built-in power transformers. The kits also come with mounting brackets and installation instructions. Each kit has a lifetime warranty (does not cover broken glass).
Nine dazzling StreetGlow colors are available, so you'll be able to choose the one that best complements your vehicle's paint scheme, or suits your individual style. To view all available colors, click the "More Photos" tab.
And should one of your tubes break, you won't have to buy an entirely new, four-tube kit to fix it: StreetGlow offers individual 30-and 48-inch replacement tubes.
Note: Laws governing the use of custom lighting vary from state to state. These products are not street legal in some states, and are recommended for off-road or show-car use only. Please check with your local authorities before purchasing.
What's in the box:
- 2 Green 48" neon tubes (each tube has an attached 57" length of wire)
- 2 Green 30" neon tubes (each tube has an attached 57" length of wire)
- 1 Distribution block
- 1 Illuminated switch assembly (has 3' ground lead/5' transformer lead and battery lead with an in-line 3A fuse)
- One 34" DC power cord (has a connector that plugs into the distribution block on one end and bare wire on the other end)
- One 20' length of wire (has bare wire on both ends)
- One 9.75' length of wire (has bare wire on both ends)
- 14 Nylon clamp tube holders
- 2 Scotch locks
- 14 Plastic wire holder bases
- 14 Plastic wire holder channels
- 18 Plastic caps
- Two 11/16" self-tapping screws
- Forty-two 5/8" self-tapping screws
- Installation Instructions
- Auto-Neon Accessories book
- 2 "Team Street Glow" stickers
- "Request a Free Catalog" insert
Thanks for submitting your review
More details on the StreetGlow Undercar Neon Kit
General Overview: Each BlueLine Series under car kit comes with two 48" tubes for the sides, two 30" tubes for the front and rear, built-in transformers in each tube to simplify installation, all the necessary installation hardware, instructions and a no hassle lifetime warranty (excludes breakage). BlueLine Series tubes are not limited to under car applications. They are also great for truck bed rails, engine compartments, and other applications that require a longer lighting configuration.
Note: On each 48" tube, the available light length is 40-15/16" and on each 30" tube, the available light length is 22-1/2".
Lexan Tubes: Each neon bulb is encapsulated in high-impact Lexan to withstand the toughest road conditions and elements.
Distribution Block: The distribution block has four outputs, one for each tube. For proper installation, the distribution block must be wired directly to the battery or fuse box. The distribution block is 2.135" wide, 0.751" tall, and 1.917" deep.
Note: The distribution block should be installed on a flat, moisture-free surface that is near your power source, but away from the engine and moving parts.
Illuminated Switch: The illuminated switch is connected to the battery and distribution block, allowing you to turn the tubes on and off from one convenient location.
Installation Note: The neon tubes must be installed away from all fuel lines, the exhaust system, areas of extreme heat, moving parts and where lifts or jacks are used to raise your vehicle.