About the StreetGlow 15" Neon Accent Kits
Are you looking to put the perfect finishing touch on your car audio system? Neon Accent kits from StreetGlow give you the chance to add a touch of class to your installation by illuminating your amp rack, subwoofer box, or other components with the stylish glow of neon.
You don't need a fancy, multi-amp system to enjoy these neon accents, though. They're a fun and attractive addition to any vehicle. Install them under a seat or below the dash to cast a hip, luminous glow at your feet. Or put them in the cargo area of your sport utility vehicle for a shine that'll really turn heads on other drivers and pedestrians alike.
Each 15" tube has a built-in transformer and a cigarette lighter adapter for simple plug-and-go operation. Or you can permanently mount your tubes by clipping off the adapter and connecting to a 12-volt power source.
Lifetime warranty. Does not cover broken glass. For interior mounting only. Tubes are also available in 10- and 20-inch sizes. Please note that the stated length is for the entire unit, including the bracket and transformer, not just the length of the neon light.
Note: Laws governing the use of custom lighting vary from state to state. These products are not street legal in some states, and are recommended for off-road or show-car use only. Please check with your local authorities before purchasing.
What's in the box:
- One 15" Street Glow accent tube
- 17-1/2' attached cord w/ cigarette lighter adapter on end
- Two 1/2" screws
- 2 Scotch locks
Thanks for submitting your review
More details on the StreetGlow 15" Neon Accent Kits
The available light length is only
10". The length of the unit is 15"
when the plastic ends are included.
This unit can either be temporarily or permanently installed.
The light is designed for interior use only.
The unit has a 3/4" high impact resistant lexan tube and a neovax processed neon bulb.
There is a built-in transformer in the unit.
The color of the tube appears clear before it is powered.
Broken glass is not covered
under the warranty.
For Permanent Installation:
- Cut off cigarette lighter adapter
- Connect red wire to a toggle switch
- Connect black wire to ground
- Connect a constant 12 volt power source to switch