About the StreetGlow 9" Neon Mini-accent Kits
StreetGlow's Neon Mini-Accent kits make it easy to get neon glow in those tight, hard-to-install areas (glove compartment, under seats, speaker grilles, etc). Two tubes come with each kit, each with its own 3-foot power cord, and mounting hardware. The dual-output power supply comes with a 7-1/2 foot cord with cigarette lighter adapter.
The 9-inch tubes are available in nine exotic colors, and serve as a great starter kit for a beginner or the perfect complement to an existing system. Overall tube length is 9-13/16", available light length is 6.5". The color of the tube appears clear until it is powered. Lifetime warranty (does not cover broken glass).
Note: Laws governing the use of custom lighting vary from state to state. These products are not street legal in some states, and are recommended for off-road or show-car use only. Please check with your local authorities before purchasing.
What's in the box:
- Two 9" Street Glow Mini-Neon Accent Tubes with attached 34" cords
- One AN6/9 Neon power supply with attached 7.5' cord and cigarette lighter adapter
- 6 Self-tapping screws (Four 1/16" diameter-Two 1/8" diameter)
StreetGlow 9" Neon Mini-accent Kits reviews
Thanks for submitting your review
More details on the StreetGlow 9" Neon Mini-accent Kits
General Overview: StreetGlow's Neon Mini-Accent kits make it easy to get neon glow in those tight, hard-to-install areas (glove compartment, under seats, speaker grilles, etc). Two tubes come with each kit.On each tube, the available light length is only 6.5" and the overall length is 9.805", including the plastic ends. Note: The lights are designed for interior use only.
Materials: Each unit has a 7/16" high impact resistant Lexan tube and a Neovax processed neon bulb. The color of the tubes appear clear before they are powered.
Power Supply: The power supply has two outputs, one for each tube. The power supply is 2.069" wide, 1.071" tall, and 2.769" deep. It has a 7.5' cord with a cigarette lighter adapter.
Installation: The power supply can either be temporarily or permanently installed. For Permanent Installation:
- Cut off cigarette lighter adapter
- Connect red wire to a toggle switch
- Connect black wire to ground
- Connect a constant 12 volt power source to switch