About the StreetGlow Xenon Strobe Lights
Take your in-car party to new heights with StreetGlow's Xenon strobe lights! The Xenon bulbs used in StreetGlow's strobe lights are capable of up to twice the brightness of standard bulbs, and flash 2-1/2 times per second, so you'll definitely get a stunning display. Put them anywhere amp rack, trunk, under seats wherever you want a mind-blowing effect that'll draw a crowd.
You can choose from nine different colors, which means you can either match your car's color scheme or put together a dazzling multicolor show. To view available colors, click the "More Photos" tab.
Each strobe light requires a simple, two-wire hookup (power and ground); installation instructions and mounting hardware are included (switch not included).
Dimensions: 2-5/8"W x 1-1/2"H x 1-1/4"D. Lifetime warranty (does not cover broken glass).
Note: Laws governing the use of custom lighting vary from state to state. These products are not street legal in some states, and are recommended for off-road or show-car use only. Please check with your local authorities before purchasing.
What's in the box:
- 1 Coral pink strobe light with attached 11.25" power and ground wires
- 2 Mounting screws
- 2 Electrical tap-in connectors
- 1 Team Street Glow sticker
- 1 Auto-Neon Accessories booklet
- Instructions (on package insert)
- 1 "Request a Free Catalog" card with web site address
Thanks for submitting your review
More details on the StreetGlow Xenon Strobe Lights
General Description: This strobe light can be used for many interior and exterior applications. Common mounting locations include speaker boxes, the underside of seats, amp racks and the front driver and passenger foot wells. The strobe should not be mounted near heat emitting devices, such as the engine or exhaust system in your vehicle.
Compatibility: This strobe light can connect to any 12 volt DC source.
- Xenon Turbo Bulb
- 2.5 flashes per second
- Simple 2 wire hookup
Wiring: The strobe light comes with the power and ground wires attached, and two tap-in connectors are included. When the supplied tap-in connectors are used, you will not need to cut any existing factory wires. The strobe can be connected to a switched power source for operation whenever your vehicle is on, or an optional switch (sold separately) may be used to turn the strobe as desired.
Mounting: The light can be mounted using the strip of double sided tape that comes attached to the strobe, or the included mounting screws can be used for a more secure installation.