Contact us
Close contact box

Rockford Fosgate P2-2X12

Ported enclosure with two 12" Punch P2 subwoofers

Item # 5751P22X12

Ships free

Temporarily out of stock

Ship date unknown

$369.99

Other options

About the Rockford Fosgate P2-2X12

Standout performance

Rockford Fosgate's P2-2X12 ported enclosure offers the extra power handling of Punch P2 12" subs, so you and your passengers can rock out to powerful bass.

Bulletproof bass

The enclosure houses two Punch P2 12" subs, each with a paper cone that's reinforced with Kevlar fibers and supported by a rubber surround. The heavy-duty motor assemblies and advanced cooling vents allow these subs to handle up to 400 watts RMS each without flinching. The subs are internally wired for a 1-ohm total impedance, so make sure your amp can power this enclosure safely.

Advanced port design

Rugged 5/8" medium-density fiberboard construction means this enclosure will hold strong for fat, heavy bass. Industrial-grade black carpet provides a clean, finished look, and protects your trunk from nicks and scratches. The spring terminals will accept bare wire, pin connectors, or banana plugs. This enclosure uses an advanced port design that promotes generous air movement, while reducing distortion-causing port noise, so you hear louder, deeper bass. Add an amp and some wiring, and feel the thick low end this enclosure adds to your ride.

Product highlights:

  • ported hatchback-style enclosure with two 12" Punch P2 subwoofers
  • 5/8" medium density fiberboard construction covered with black carpet
  • 1-ohm total impedance
  • power handling: 300-800 watts RMS
  • peak power: 1600 watts
  • frequency response: 27-250 Hz
  • sensitivity: 86 dB
  • 33-7/8"W x 15-1/4"H x 16-5/8"D1 x 14"D2
  • warranty: 1 year
  • Our 60-day money-back guarantee
  • MFR # P2-2X12
KEEP READINGREAD LESS

What's in the box:

  • Vented subwoofer enclosure loaded with two Punch P2D4-12 12" Woofers
  • Installation and Operation Instructions

Customer reviews

Loading reviews...

Rockford Fosgate P2-2X12 Reviews

Average Customer Review(s):

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

More details on the Rockford Fosgate P2-2X12

Features & specs

General
Woofer Size (inches) 12
Speakers Per Box 2
Woofer Material Kevlar/Paper
Enclosure Type Ported
Color Black
Pieces in System 1
Width (inches) 33-7/8
Height (inches) 15-1/4
Depth (inches) 16-5/8
Second Depth (inches) 14
Connector Type Spring post
Frequency Response 27-250 Hz
Power Range (Watts RMS) 800
Maximum Wattage 1600
Sensitivity 86 dB
Impedance 1 ohms
Parts Warranty 1 Year
Labor Warranty 1 Year

Product Research

Features

Punch Woofer: The enclosure houses two front-firing Rockford Fosgate Punch P2D4-12 12" subwoofers. Both woofers' dual 4-ohm voice coils are internally wired in parallel to present a 1-ohm load. The sub features a StampCast steel frame, a Kevlar fiber reinforced paper cone, and Santoprene surround. An anodized aluminum voice coil former and spider venting help keep the subwoofer cool.

Spider: Dual spiders made from tear and fatigue resistant poly-cotton improve mechanical stability under high excursion, maintaining consistent excursion characteristics.

Solid MDF Construction: The enclosure is constructed of high quality 5/8" MDF (medium-density fiberboard), which resists flexing and has anti-resonant qualities.

Vented Enclosure: The vented enclosure is aided by precision construction through computer design. The enclosure consists of two front firing 12" Punch P2 series subwoofers with a proprietary high-flow, low-noise port. The speaker terminals are located on the left side of the box (when facing the box). The box is covered in black carpet.

Tuned Port: The enclosure uses a front-firing proprietary high-flow, low-noise port to help produce deep and loud bass efficiently.

Box Carpeting: The enclosure is finished with high-density carpeting for superior durability. The carpet is black.

Speaker Terminal: The subwoofer enclosure uses one pair of high current, spring loaded binding posts. The binding posts are located on the left side of the box and will accept pin connectors, single or dual banana plugs, or bare wire up to 10 gauge.

Power Handling: The subwoofer can handle up to 800 watts RMS; 1600 watts peak power.

CEA-2031 Compliant: Power handling on the P2D2-12 subwoofer conforms to CEA-2031 industry standards. This means the subwoofer has the capacity to handle its rated power under continuous demand, not just for an instant.

Dimensions: The depth dimensions listed in Features & Specs include the subwoofer's trim ring, which adds approximately 7/8 of an inch. The depth of just the enclosure is 15-3/4 inches at the base and 13-1/8 inches at the top.

Loading accessories...

Customer Q&A

Q
Crutchfield asked: Why did you buy this?
A
Great reviews and quality brand [ Kevin  Jan 21, 2019 ]
A
Quality [ Anthony  Dec 13, 2018 ]
A
It is a great product for a great price. Rockford is known for having great bass and their dedication to quality always stands out.Crutchfield is awesome for having this at a great price. :) [ Jimmy  Aug 13, 2018 ]
A
Style,power,price [ David  Jul 23, 2018 ]
A
Grilles to help protect subs from damage [ Hayden  Jul 20, 2018 ]
A
I wanted loud bass and something i could add a large amp to eventually [ jacob  Jul 15, 2018 ]
A
Was a reputable brand that had good reviews along with it having a high RMS watt output without it being crazy expensive. [ Lisa  May 02, 2018 ]
A
It's Rockford Fosgate!!!! LOL! [ Daryl  Feb 17, 2018 ]
A
I know the brand and my friend had p2 and I liked them a lot [ Juan  Dec 24, 2017 ]
A
Awesome deal in great product [ will  Dec 14, 2017 ]
A
Owned Fosgate speakers as a kid and they rocked then, and from what I read they are still an outstanding product now. [ Kelly  Dec 08, 2017 ]
A
Review [ Daniel  Mar 11, 2017 ]
A
I choose this because it appears to be a good quality audio product and has good specs. [ Larry  Feb 10, 2016 ]
SHOW MORESHOW LESS

10 questions already asked

Q
can objects be sat on top of this without anything being messed up?
[ Garrett  Aug 13, 2018 ]
2 answers
A
Yes As long as the item can take the vibration. The box is very solid.
[ Thamen  Aug 14, 2018 ]
A
The box is very heavily constructed and strong. As long as nothing is sat on the side the speakers are on it will not hurt it.
[ Charles  Aug 13, 2018 ]
Q
Do i need an amp for this?
[ Jason  Apr 26, 2018 ]
2 answers
A
Yes indeed.... It must be 1 ohm stable and have plenty of power. I suggest the PIONEER GM D8601 (800 Watts) or GM D 9601(1200 Watts) I used the 8601 with no problem.... Both amps are 1 amp stable and affordable..... Onky other affordable amps that can push it are SKAR amps....but you have to go to SKAR AUDIO website...
[ will  May 11, 2018 ]
A
Only if you want it to have any boom!
[ michael  May 11, 2018 ]
Q
Hey would an Skar RP-2000.1D | Monoblock Car Amplifie run this??
[ Joshpersaud  Mar 28, 2018 ]
6 answers
A
If the amp is a true 2000 watts rms, then it would probably be too much power for them. These subs are 400 watts rms a piece and 800 total. I have the rockford 750.1 running them and it works fantastic. Its birth certificate claims it's actually pushing 870. That skar amp would be better for the P3s, as they are 800 watts rms a piece, 1600 watts total. Hope this helps!
[ MICHAEL R  Apr 20, 2018 ]
A
I think that amp is to powerful but not quite sure
[ ROCKY  Apr 10, 2018 ]
A
Definitely since it's 1 ohm stable !!! I've never heard of that brand so I did a little research...Wow it looks like they make sone quality products!! I'm really impressed with the 6.5 inch subs too!
[ will  Apr 09, 2018 ]
A
I have pioneer 2400w on it and it blew them if I had my bass at 1/4 uo and turned my radio past 28. they peak at 1600w so I'd say the 2000 would do just fine on it
[ Brandon  Apr 09, 2018 ]
A
What's good broski. This subwoofer combo comes "loaded" from the factory wired at a 1 ohm impedance. After looking at your amp rating for a 1 ohm impedance you would be running 2000 Watts RMS into a subwoofer set at 800 RMS which would in turn fry the subwoofers because the amp is too strong. However since the subwoofers 4 OHM DVC you could rewire the subs to have a final impedance of 4 ohms at 800 RMS. Which would match perfectly with your amplifier rating at 4 ohms which is also 800 RMS. I hope this helped you out. You can look online how to rewire 2 DVC 4 ohms subwoofers to have a final impedance of 4ohms. Or take it to a shop and tell them you want the subs rewired to a 4 ohm final impedence. Remember amplifie tuning is everything have a professional do it if you don't know how. Clipping is a bass heads worse nightmare and will destroy the subs really fast.
[ Isaiah  Apr 08, 2018 ]
A
If 2 ohm stable then yes??
[ William  Apr 08, 2018 ]
Q
What kind of amp should i use?
[ Robert  Jan 31, 2018 ]
1 answer
A
Thanks for your question. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system.
[ Krissy  Feb 02, 2018 ]  Staff
Q
What amp would you suggest I used to power this to the Max and not heard it?! but good heavy Bass!? I'm putting this in a 2000 Silverado extended cab not much room other than back seat
[ Phil  Dec 09, 2017 ]
1 answer
A
Thanks for your question. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system.
[ Krissy  Dec 11, 2017 ]  Staff
Q
Would this fit under the back seat of my 04 Honda Element?
[ Kevin  Sep 05, 2017 ]
1 answer
A
We do not have the available space dimensions under the rear seat of the 2004 Honda Element. Even still, I don't think the 15.25" height of this enclosure is likely to fit under the seats of your vehicle. We did measure the available space in the rear cargo area and found plenty of space for this enclosure back there.
[ Ryan  Sep 09, 2017 ]  Staff
Q
would a 750w R.M.S amplifier be enough to run these woofers?
[ hunter  Apr 22, 2016 ]
1 answer
A
Assuming the amp is 1 Ohm stable (The woofers are prewired to present a 1 Ohm load to the connected amp), yes. The enclosure is rated to handle up to 800 watts RMS so 750 is very close to their full potential. I hope that helps! My Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=5
[ Ryan  Apr 25, 2016 ]  Staff
Q
I recently purchased these subs..I have a spl 1000 watt amp.is that enough power to push the subs if the amp is bridged?
[ ed  Dec 27, 2014 ]
1 answer
A
Thanks for your question. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system.
[ Krissy  Dec 28, 2014 ]  Staff
Q
What should I use as a warm up for this subwoofer in the freezing cold?
[ TCramer24  Nov 19, 2014 ]
1 answer
A
I forwarded your question to an Advisor and they responded with the following: First, warm up the interior of the car if unit is in a trunk not getting heat use low volume, full range music like trance type dance music or classical. If you would like to discuss further you can contact an Advisor directly by phone (1-800-324-9695) or online chat.
[ Krissy  Nov 26, 2014 ]  Staff
Q
What should I purchase? P2-2X12, P1-2X12 or the P1-2X10?
[ Anthony  Sep 26, 2014 ]
2 answers
A
P2 for sure!!
[ will  May 11, 2018 ]
A
We have not received any answers from other customers on your question. I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They should be able to help answer your question.
[ Krissy  Sep 29, 2014 ]  Staff
SHOW MORESHOW LESS

Loading articles...

TOP