Contact us
Close contact box
Connect ID #
310 555 744 3
Connect ID #
310 555 744 3
All finished with your chat session?

We’ll email you a transcript of this conversation for your records.

Our contact center is currently closed.

Please enter your name.  
Please enter a valid email address. Why is this required?
Please enter your US phone number.  

For Tech Support, call 1-888-292-2575

Thank you, !
Our conversation will be emailed to

Your Advisor,

More about me
Please enter a question  
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  

Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Rockford Fosgate 3Sixty.3

Programmable 8-channel digital signal processor

Item # 5753SIXTY3

Rockford Fosgate built their 3Sixty.3 processor so you can enjoy amazing sound quality from your vehicle's sound...

Rockford Fosgate built their 3Sixty.3 processor so you can enjoy amazing sound quality from your vehicle's sound...

Item # 5753SIXTY3

In stock

About the Rockford Fosgate 3Sixty.3

Total audio control via your laptop

Rockford Fosgate built their 3Sixty.3 processor so you can enjoy amazing sound quality from your vehicle's sound system — the quality you'd expect from a high-fidelity home stereo system or a pair of really good headphones. This sophisticated signal processor works with your laptop to give you awesome control. Once you load the software from the included setup CD, you can connect the 3Sixty.3 to your laptop with the included USB cable, and get to work creating a perfect-sounding system with the user interface controls displayed on your computer's screen.

Total audio control via your laptop

Rockford Fosgate built their 3Sixty.3 processor so you can enjoy amazing sound quality from your vehicle's sound system — the quality you'd expect from a high-fidelity home stereo system or a pair of really good headphones. This sophisticated signal processor works with your laptop to give you awesome control. Once you load the software from the included setup CD, you can connect the 3Sixty.3 to your laptop with the included USB cable, and get to work creating a perfect-sounding system with the user interface controls displayed on your computer's screen.

3Sixty.3 input panel

Setting up

The 3Sixty.3 can handle up to 8 inputs, whether they're line-level signals from an aftermarket receiver or speaker-level signals from a factory radio. You can set the input signals to combine together or stay distinct, and then assign them to up to 8 output channels. The setup CD includes a track to help set input levels and another track that's used in the "Auto Normalize" feature that flattens the entire system's EQ response curve automatically. The remote amp turn-on connection features an adjustable delay, so you'll never hear a pop when you turn your system on.

3Sixty.3 output panel

Add sources

The 3Sixty.3 lets you add sources through both auxiliary RCA and TOSLINK optical connections. A wired remote control lets you switch between main source, auxiliary input, optical, or a Bluetooth® enabled device. The Bluetooth feature can be set to "Auto Play," which automatically switches the source over to your Bluetooth device when it sends out a notification or plays music.

Central control

The main user interface screen displays your speaker configuration, a wired remote simulator, an EQ graph, and the EQ controls. Each of the 3Sixty.3's 8 channels has its own crossover network, level adjustment, delay setting, polarity switch, and 31 bands of equalization. You can link channels together, if you want them to have identical EQ settings.

P-DSP tuning screen

The main control panel for the 3Sixty.3, as it appears on your computer's screen

Crossover networks

Each crossover network can be set as a high-pass, low-pass, all-pass, bandpass, high-shelf, or low-shelf filter, so you can take care of virtually any combination of speaker components. You can choose between 4 classes of crossover filters to achieve the exact audio response you want. (See bullets for details.) If that weren't enough, you can also select between 4 different slopes for each crossover response curve to attain unbelievable clarity from each of your speakers.

EQ and time alignment

The 31-band parametric equalizer on each channel gives you the sonic power and control to really make your sound system sing. (That's 248 total bands of EQ, if you want to tweak them all.) Time alignment can be accomplished by measuring distances or by time settings, so your music gets centered on your listening position for an incredible improvement in musical clarity and realism.


Product highlights:

  • digital signal processor
  • DSP settings and adjustments made via laptop or PC (using Windows) through USB port
  • setup CD includes the user interface software (CD player required)
  • 8 assignable inputs
  • inputs: 8 RCA preamp, 8 speaker-level, L/R auxiliary RCA, 1 optical TOSLINK (S/PDIF), and Bluetooth device
  • wireless Bluetooth dongle included
  • wired remote includes 2 assignable controls for master volume, sub level, or bass boost, and switches to select between 4 sources and 3 EQ presets
  • 8 preamp outputs (up to 8 volts)
  • remote amp turn-on with selectable delay times (1, 2, 4, or 8 seconds)
  • time alignment set by centimeters, inches, or milliseconds
  • 31-band parametric EQ on all channels
  • channel EQ settings can be separate or linked together
  • crossover filters can be set as all-pass, high-pass, low-pass, bandpass, high-shelf, or low-shelf filters (20-20,000 Hz)
  • selectable slopes (12, 24, 36, or 48 dB/octave)
  • selectable filter classes
    • Butterworth: sharp transition, suitable for most applications
    • Bessel: gradual transition, suitable for smooth speakers, but not subs
    • Linkwitz: recommended for high-end speakers only, not subs
    • Chebyshev: very sharp transition, useful as high-pass for tweeters or low-pass for subs
  • phase switch on every channel
  • includes 16.5-foot USB cable
  • dimensions: 9-5/16"W x 1-11/16"H x 6-15/16"D
  • warranty: 1 year
  • Our 60-day money-back guarantee
  • MFR # 3SIXTY.3

What's in the box:

  • Interactive signal processor
  • 4-Pin power harness
  • 16-Pin speaker-level input harness
  • Bluetooth dongle
  • Wired remote control
  • 19.5' Remote cable
  • 16.5' USB (type-B) to USB (type-A) cable
  • Mounting bracket
  • 2 Screws
  • Setup CD-ROM
  • Installation/Operation Manual

Customer reviews

Loading reviews...

Rockford Fosgate 3Sixty.3 reviews

Average review:

28 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee purchase (What's this?)



Crutchfield response

<< >>

More details on the Rockford Fosgate 3Sixty.3

Russ B.
The Rockford Fosgate 3Sixty.3 replaces these items:

Product Research



Interactive Signal Processor: As the automotive manufacturers increasingly make their source units (radios) an integral part of the vehicle, it becomes increasingly harder to change them out and upgrade your system. The Rockford Fosgate 3Sixty.3 Interactive Signal Processor makes it possible to utilize your vehicle's factory source unit and still create the sound experience that fits you. With an easy to use interface, the 3Sixty.3 connected to your vehicle's source unit and an amplifier, you can create a sound stage that is personally tuned to your vehicle. The 3Sixty.3 gives you all the benefits of creating the best system possible without compromising the manufacturer's integrated source system. The Rockford Fosgate 3Sixty.3 Interactive Signal Processor is the perfect solution if you need to add aftermarket equipment to your factory source unit, integrate your mobile devices, or have complete control over your car audio signal. The 3Sixty.3 can function as an OEM integration "black box" or a complete surround sound DSP. Featuring 8-channels of interactive signal processing, it can handle the most complex system design. Plus with features like Bluetooth streaming, selectable crossover types, and a USB interface; the 3Sixty.3 offers the versatility you need to upgrade your OEM car audio system without replacing the factory head unit.

Note: To tune the 3Sixty.3 properly to your factory car audio system, the source unit must have a CD player, and you must have a separate amplifier with RCA inputs. A Windows PC laptop is also required for initial setup and adjustments.

DSM: DSM (an industry-leading manufacturing process) utilizes high-speed robotics, high-quality 1% tight-tolerance parts, and large board traces. The discrete components are laser etched to meet a particular value and a very low tolerance. This lower tolerance improves the efficiency of the circuit, decreases cross-talk from other discrete components, and lowers operating temperature.

Frequency Normalization: Frequency normalization is achieved by characterizing the frequency response of the audio source based on a reference input signal. This reference input signal is used to establish a reference frequency response, which is stored in memory and used to select equalizer settings. The system restores missing spectral content by summing multiple input signals from the audio source. The system then normalizes the frequency response based on characterizations of the signal by utilizing equalizer settings from memory.

Bluetooth A2DP Audio Streaming: The 3Sixty.3 includes a Bluetooth wireless dongle which allows you to wirelessly stream audio from your Bluetooth-enabled device.

RFLink: RFLink is a communication protocol allowing multiple Rockford Fosgate components to link-up with each other to provide intelligent control. The 3Sixty.3 features two RFLink jacks. Either one can be used to connect the included wired remote control.

Power LED: The RF logo illuminates white once initialized, illuminates blue when connected to a PC, flashes blue when transmitting data to/from a PC, and flashes red when a problem has occurred.

Mounting Options: The Rockford Fosgate 3Sixty.3 should be mounted inside the vehicle, such as under the passenger seat. It can also be mounted in the trunk area. It should never be mounted inside the engine compartment.


Interactive Graphic User Interface (GUI) Controlled via Windows PC: Once you have installed the Rockford Fosgate 3Sixty.3, a windows PC laptop will be need for initial setup and adjustments for the interactive signal processor to properly work with your system. The 3Sixty.3 includes a setup disc with windows PC software to configure the interactive sound processor to your vehicle and car audio system. Your PC must use a Windows XP, VISTA, or 7 OS with at least one USB (type-A) connection and have an internet connection. Once you've loaded the software onto your Windows laptop, you will then insert the disc into your vehicle's source unit (head unit).

Configuration Menu: The Configuration menu is used to set up the assign input/output configuration, input summing, assign source presets, input level set, and denormalization of a high level input, of the 3Sixty.3 processor

  • Assign Input/Output: The 3Sixty.3 can handle up to 8-channels of input and 8-channels of output. In the Assign Input Configuration page there are three possible input sources available; Low Level (RCA), High Level (Speaker), Optical (Toslink). The input and output channels can be assigned in any configuration/combination. The labeling of the inputs and outputs on the 3Sixty.3 is simply a guide for the most common system found in vehicles.
  • Input Summing: The 3Sixty.3 can take two or more non full-range, high-level signals and combine them to make one full-range low level signal. When an input is set "High Level (Speaker)" you are given the opportunity to select an output channel from the diagram and select which inputs you would like to sum for that output channel. You must assign at least one input channel for each output channel.
  • Assign Source Presets: The 3Sixty.3 can save up to four separate EQ settings (Presets). The four presets can be setup so that each source can have a dedicated EQ setting or so that each source can run multiple EQ settings. Any source that does not have a preset assigned to it will be disabled. the remote will skip any unused sources and presets during selection mode.
  • Input Level Setup: The 3Sixty.3 utilizes a very unique circuit to detect the maximum output voltage that can be achieved from each channel of your source unit at a very low THD level. The 3Sixty.3 comes with a special modulated signal on track 1 of the Setup Disk that is used to measure the source unit's output. Insert the Setup Disk into your source unit, and select track #1. Each input channel selected in the Assign Input Configuration window will display a level meter, indicating the voltage for that channel as well as the amount of THD measured. The THD level is indicated by the color of the level meter. A green level meter indicates an acceptable amount of THD, while a red level meter indicates an unacceptable level. Turn the volume on the source unit to maximum, then reduce the volume until the level meter for every channel is green. Then, make note of the final source volume on the source unit level, which is the maximum level the source unit should be turned up to once the installation is complete. On the "Input Attenuators" page, the input level of each channel is displayed using a level meter and underneath each level meter is an attenuation level slider. In order to ensure an equal output voltage on all channels, the "Auto Range" feature attenuates each input channel to 2V before entering the DSP. This is the maximum input voltage needed to achieve the maximum 8Vrms on the 3Sixty.3's output.
  • Input Denormalization: The 3Sixty.3's input denormalization function is designed to measure the electrical frequency response of each channel from your source unit and calculate the correction curve needed to flatten the output of each channel. It then combines the correction curve with the source units output, giving you a flat frequency response on the output channels. Select track #2 (Correlated Pink noise) on the 3Sixty.3 setup disk. The volume of the source unit can be left at its maximum level unless the source unit has a volume dependant equalization circuit such as most BOSE systems, in which case the source unit should be set to half of the maximum level calculated when level setting the input. Select the "Auto Normalize" button, this can take approximately 1-5 minutes to calculated the correction curve needed to normalize the output. You can now use the drop down menu to switch between the measured input frequency response and the corrected output frequency response displayed on the graph. The color correlating to each channel on the graph will be displayed on the right hand side. The "Read Results" button on the left hand side is only used when a 3Sixty.3 processor unit has been previously configured and the user wants to view the input or output curves previously calculated without rerunning the "Auto Normalize" function.

Speaker Selection: The upper left of the GUI displays a picture of a vehicle with the speakers (channels) displayed that were initialized in the Assign Input/Output section of the initial configuration. Each speaker (channel) can be configured individually or you can link together channels. For convenience the sub woofer channels just have one check box to link the level, crossover, and EQ. By selecting to link the left and right channel level, crossover, or EQ together what you do with one side will be duplicated to the other side. The speaker (channel) that is selected will be highlighted blue and the channels name will be displayed above the vehicle diagram.

Equalizer: The EQ graph will start with a perfectly flat response (20-20 kHz) when first setting up your equalizer, then any changes/additions to the 31-band EQ, filters, or Q, will be displayed in the EQ graph. Every channel has its own independent (unless linked) EQ adjustments. The EQ adjustments can be broken down into three separate sections; Crossover Network(s), Level & Delay, and the 31-Band EQ Adjustments.

  • Crossover Networks: The crossover adjustments consist of three parts; Crossover Type, Crossover Class, and Crossover Slope.
    • Crossover Type: The crossover type for each channel can be configured as either high-pass (HPF), low-pass (LPF), band-pass (BPF), low-shelf (LSF), high-shelf (HSF) or completely by-passed (AP). After selecting the crossover type, you will need to enter the frequencies (20-20 kHz) you would like your filter(s) to cutoff at.
    • Crossover Class: The crossover class for each channel can be configured as either Linkwitz (Q=0.49), Bessel (Q=0.58), Butterworth (Q=0.707), or Chebychev (Q=1.0). If you are not sure which class to use, we recommend starting with a Butterworth filter because of its flat response characteristics.
    • Crossover Slope: The crossover slope for each channel can be configured as either 12dB/octave, 24dB/octave. 36dB/octave, or 48dB/octave. The steeper the slope, the faster the roll-off; resulting in less content passing through the device from the unwanted frequency range.
  • Level & Delay: The level for each channel of the 3Sixty.3 can be attenuated up to -40dB. This feature can be used to; reduce the output voltage for amplifiers that have a maximum input voltage that is less than 8V, adjust the balance or fade, or to level set a source. Each channel of the 3Sixty.3 can be delayed by up to 10 msec. The delay can be entered in distance or time.
  • 31-Band EQ Adjustments: The 3Sixty.3's 31-band parametric EQ has five main adjustments used to adjust the outputs frequency response; Band, Frequency, Q, Gain, and Polarity. There is also three master resets that can be used to return each main EQ adjustment back to default. In addition to the four main adjustments, you can invert the phase or mute the selected channel(s).
    • Band: Each channel of the 3Sixty.3 has a variable 31 band EQ. The default frequency for each band is set to 1/3 octave increments, however each band's frequency can be changed to any desired frequency.
    • Frequency: Each band of the EQ has a variable frequency (20-20 kHz) that the user can change from the default value.
    • Q: Each band of the EQ has a variable Q that the user can change from 0.1 to 6.
    • Gain: Each band of the EQ has a variable gain that the user can adjust the level from -24dB to +24dB.
    • Polarity: You can choose to reverse the polarity of each channel.

Balanced/Unbalanced Switch: For matching the output of the 3Sixty.3 to the input of the amplifier, the interactive signal processor utilizes a compensation circuit to insure an 8V pre out regardless of the switch position.

Remote Output Delay: Remote Output Delay Timing options include 1 sec, 2 sec, 4 sec, or 8 sec. This allows you to customize the time delay from when the 3Sixty.3 initializes (turns on) to when it turns on any external amplifiers connected to its REM OUT (blue wire in 4 pin power harness). This extended timing ensures that the source unit and 3Sixty.3 are on and initialized before initializing (turning on) the amplifiers, therefore eliminating any turn-on "pop" noise.

Wired Remote Control: The included wired remote features two 3-way rotary knobs. The two knobs can be programmed to control two of the following three functions when rotating the knobs; Master Volume, Sub Output Level, and Punch EQ Output Level. Pressing the knob on the left selects between four inputs (Main, Bluetooth, AUX, & Optical). Pressing the right knob switches between 4 stored EQ presets. The wired remote control's 8 LEDs indicate multiple functions. If either of the knobs are rotated all 8 LEDs work sequentially to indicate the level of what the user has configured that knob to do. When no LEDs are illuminated the configured knob is at its minimum output level position, and when all the LEDs are illuminated it indicates the max output level position. When no knobs have been rotated or 5 seconds after one has been rotated, the LEDs function changes to indicate the "Preset" selected (1-4) on the four LEDs above the right knob and the "Source" selected on the four LEDs above the left knob. The source LEDs are as follows; (1) Main, (2) Bluetooth, (3) AUX, and (4) Optical. The wired remote control comes with 19.5' of cable and a mounting bracket, and should be mounted in a location that is readily accessible to the driver. The casing surround the remote control can be removed to flush-mount the device.


Power/Ground Connections: The 3Sixty.3 interactive signal processor includes a detachable 4-pin connector with 16AWG wire leads for the Power, Ground, Remote In, and Remote Out.

8-Channel RCA Inputs/Outputs: The Rockford Fosgate 3Sixty.3 is equipped with 8 RCA inputs and 8 RCA outputs for Front Left/Right channels, Front 2 Left/Right channels, Rear Left/Right channels, and Sub Left/Right channels. The RCA terminals are nickel-plated to resist signal degradation and corrosion.

Note: The 3Sixty.3 can be set up to create a 8-channel output with only 2-channels (Left & Right) of input. However, for the best sound stage, it is strongly recommended to connect into all of the outputs from the vehicles factory system. If you are not using all 8 inputs (Front/Front2/Rear/Sub) you can SUM the inputs during configuration under the OEM system setup. Keep in mind that if you choose to use SUM, all left channels selected will form one signal and all right channels selected will form one signal. Stereo imaging will be maintained, but your fader may cease to function depending on the channels selected to sum.

8-Channel High-Level Input (w/ Signal Sense Turn-On): The interactive digital processor includes a detachable 16-pin connector with 16AWG wire leads for connecting up to 8 high-level channels of input. The 3Sixty.3's high-level input offers automatic signal sense turn-on, which means the device automatically turns on when it senses an audio signal.

Note: Make sure to maintain signal polarity when using the high level inputs. Failure to do so may cause undesirable phasing effects and the signal sense may not turn on the unit.

AUX RCA Input: The Rockford Fosgate 3Sixty.3 is fitted with a stereo RCA auxiliary input for connection of an external portable audio device.

Optical Input: The unit's optical (toslink) input supports stereo PCM audio (S/PDIF) 48 kHz/24-bit.

USB Port: The interactive signal processor utilizes a USB 2.0 (type-B) connector to connect the 3Sixty.3 to your Windows PC for programming.

Loading accessories...

Customer Q&A

9 questions already asked

Can this be used without a headunit only streaming from android device? I want to use cell/tablet for control and display. If yes how do you setup if the setup/optimize is on cd?
[ Adam  May 10, 2019 ]
1 answer
Yes you can use a tablet to connect to the 3sixty.3 via the blue tooth adapter. The sound files for tuning can be added to the music library on your tablet with a PC.
[ Daniel  May 10, 2019 ]
does this processor work on other name brand amps so i can tune them i got sundown audio amps and looking to buy this for my ipad indash im installing?
[ pollo  Nov 18, 2016 ]
3 answers
I actually used to run my sundown amp with it also. -!; now I'm running my cressendo amp with it.
[ Matthew  Nov 19, 2016 ]
It works with any brand amp
[ MUHAMMAD  Nov 18, 2016 ]
Yep it will work with any amp. Mine was DOA though, and the software does not work well on Windows 10. So I returned it for a JL Fix 86 and TwK-88.
[ RAYMOND  Nov 18, 2016 ]
Does it work with windows 10?
[ Jevon  Oct 26, 2016 ]
2 answers
Yes, the updated software (04/2017) downloaded from the website worked on the 360.3 I just purchased with no problems.. I have a new windows 10 laptop and it worked perfectly..
[ MARC C  May 18, 2017 ]
Our web copy and the Rockford manual for the product were written prior to the release of Windows 10. While we are confident the software will be forwards compatible with Windows 10, you can contact Rockford Fosgate directly for 100% confirmation: 800-669-9899. I hope that helps. My Bio:
[ Ryan  Nov 02, 2016 ]  Staff
do i need this for a 2015 honda accord if i am changing my speakers and putting in a new sub with amps for both ?
[ Nooby  Apr 29, 2016 ]
4 answers
It doesn't have to be this one, but you definitely need a digital processor. Your factory equipment comes with the frequencies specifically tuned to work with the cheap factory speakers, and just upgrading speakers and even adding an amplifier will actually make it sound worst. (Believe me, I have been there). The processor will "clean" all frequencies and make them "flat" again, making your new speakers sound great, even when "flat", now if you get it tuned up your sound will be outstanding. My advise is that if you are not going to get a digital processor then better leave the original system the way it is. If you can not leave (as I didn't) with the factory system, them contact Crutchfield to get advise on your options for a processor (or factory system integration system) Please be aware this processor will automatically clean your frequencies to put them flat, but would not auto-tune. Just having it flat will sound excellent, but if you want it tuned more likely you will have to pay an expert to get it done.
[ ANTONIO  Apr 30, 2016 ]
No.. only if you want to control all the speaker frequencies from the highs to the lows and separately. It will let you control time delay from each speaker if you want the music to be very clear. You should Google your car and see if anyone has done this before! Or you can call Crutchfield " I'm not a sponsor" and they will tell you what you need and if you need it. I hope this helps?
[ Chris  Apr 30, 2016 ]
Need is relative. You do not need the Fosgate 3sixty. A simple line out converter would work for installing amp, or changing out the head unit for aftermarket. If you wanted to keep the factory head unit than any crossover or line out converter with speaker level inputs would technically work.. the 360 is all of the above plus a 30-31 band digital equipment with every imaginable detail (crossover point, crossover slope, crossover filter, freq band level control, bass level control, etc.) adjustable.. knowing what I know now I would probably not buy a head unit again. I would simply tie this (or similar unit) in with speaker level inputs and use this as my factory integration.. if you're not looking for $500 worth of control, then I would go for one of the cheaper audio control units (lc6 or lc7).. those crossover points would be preset and would not include the digital equipment, but be much easier to use.. I used the lc7 in my wife's car and loved it, had no problems.. I hope this helps
[ MARC C  Apr 29, 2016 ]
You may not need this thing but it is a very impressive tool. I installed this in my Ram truck to help manage and tune my amps while still using the stock head unit. It was a major big WOW! Awesome control and tunability. I look forward to my next new vehicle that will for sure have this in the system.
[ Kevin Brady  Apr 29, 2016 ]
I have had the 3sixty for over a year. Im not an audio technician and have no idea how to optimize the sound - frequency, Gain, butterworth, its all greek to me. Anyone have any idea how to solve this? are there any templates out these? do I need to go back to school for an tech audio degree?
[ Julio  Feb 09, 2015 ]
4 answers
It's really quite simple, unless you have an RTA I would really mess with the EQ that much, however the setting the frequency depends on what you want out of your system, I have mine set at an overlap. My door speakers are set at 80hertz and my subs are set at 85hertz. That way I don't miss any frequency. Not your time alignment is where it's the simplest. Change your preference to inches. Then you take physical measurements of how far away your speakers are and delay all of them to match the furthest one. The gain is set all by itself. The rockford tech support team is amazing at helping set up this thing. Let's just say they know me by name lol
[ BRIAN  Feb 09, 2015 ]
to be honest if you have no clue then nothing I can say here can help you. The most efficient thing to do is type in the 360. 3 on youtube and watch the numerous YouTube videos out there. they will give you a brief rundown of its functions, operations and how to set it up. The next thing you have to do is trial and error by playing with the settings and listening. other than that you may actually need some sort of formal technology training..
[ MARC C  Feb 09, 2015 ]
The 360 is designed for advanced audiophiles. You have to know the audio lingo to set it up properly. It offers no automatic tuneing feature other then the auto summing/eq of the speaker level inputs so you have to do all the work on its main outputs which most audio guys would rather do themselves anyway. All i can suggest is google "eq setup" and from that you should get back some good info. As a last effort take it to a custom car shop to have it tuned and the tech will be in awe of its power if he has never seen one.
[ kris  Feb 09, 2015 ]
I suggest taking your vehicle to a decent car audio install shop. They should have equipment to dial things in much better than you could ever do by ear.
[ mike  Feb 09, 2015 ]
? I have a 2001 BMW 325i with a aftermarket head unit and aftermarket 10 speager system that replaced the oem's: Tweeters, Midrange and 5.25" front doors, Tweeters rear doors, 6.25" rear shelf. Two subs powered by amp. The car has a factory amp which powers the interior 10 speaker system. My question is one of how I would connect my speakers to the 3sixty3. I see that it's an 8ch. Would I need a 3 way crossover for the front configuration prior to connecting to the 3sixty3. Also how should I connect my amp for the subs. RCA signal currently from head unit to amp. Looks like either rca out from head unit to input sub on 3sixty3, sub output from 3sixty3 to amp & subs. I want to make sure I can connect all of speakers prior to making purchase. Thanks!! Robert
[ ROBERT  Dec 07, 2014 ]
2 answers
I have pretty much solved the connection with one minor question. The manual states that you can not use RCA inputs in conjunction with the High Level input, only with the AUX. Therefore you can output to any RCA source. I will use the High Level input for all the factory speaker connections and use AUX input to SUB output to my amp and subs. Currently my RCA cables are connected to Rear output of source unit, should these be connected to the AUX as well since they will go into the AUX of the 3sixty3 or are the ok as they are? ??? RCA rear output from the source to AUX input on the 3sixty3, SUB output or REAR output to SUBS ???
[ ROBERT  Dec 07, 2014 ]
For details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
[ Krissy  Dec 07, 2014 ]  Staff
Planning to use this product on a VW Tiguan 2014 Keeping the RNS-510 head unit adding the 3Sixty.3 Question: A.- if I am planning to keep original speakers and add a sub woofer, do I need an amplifier? B.- or you strongly recommend changing speaker and adding amplifier? We are looking for sound quality, not volume If you have a solution (3sixty.3+subwoofer+rest) please contact me
[ Alex from Texas  Nov 03, 2014 ]
1 answer
I forwarded your question to an Advisor and they responded with the following: The Fosgate 3Sixty.3 Digital Signal Processor will allow you to keep your factory receiver and add speakers Rockford and amps as you wish. Let me start by saying that we have not yet researched the 2014 Volkswagen Tiguan, and I am basing vehicle information on the 2013 year model without the Dynaudio System. Generally it is not recommended to add amplifiers to the factory speakers, as the manufacturer has matched power available to the speaker capability. You would be able to add new speakers and subwoofers and power new gear with external power amps as needed. If you change speakers and add a four channel amplifier, you will not only have more volume, but better sound quality as well. As to a solution, our research on the 2013 Tiguan shows that there may be little depth available for the front door speakers. None of the aftermarket speakers we offer show as fitting easily. The Polk Audio db6501 6-1/2" Component System is very good quality, but is showing as an inch deeper physically than the factory speakers. You may want to take your vehicle to a professional installer in your area to see if fit is available in the doors. The same speakers are showing as an easy fit for the rear doors. The speakers are riveted in all locations, and tehse will need to be drilled out to remove the factory speakers and new mounting screw holes will need to be drilled to attach the speakers. For a subwoofer, I recommend the JL Audio PowerWedgeCS110LG-TW3. This small enclosure will really provide substantial, accurate bass reproduction. To power everything the Alpine PDX-V9 is a five channel amp, with clean power to spare. If you would like to discuss further you can contact an Advisor directly by phone (1-800-324-9695) or online chat.
[ Krissy  Nov 06, 2014 ]  Staff
Will the unit get ride of enjin noise?
[ Ronald  Sep 04, 2014 ]
6 answers
If you are still using the factory head unit for the car rather than an after market there is a bit of a hissing sound that is produced from the speakers. However, the sound is very clear when you turn up the volume. As for engine noise, there is none that I could hear of. I feel that if I were to use an aftermarket unit; the 3sixty.3 would perform much better since it would not have to convert the factory audio to flat. Knowing that there is no aftermarket kit for my car yet I will have to settle with what I have.
[ Ashley  Sep 09, 2014 ]
Not likely to remove engine noise. Common problem for engine noise = grounding.
[ Kevin  Sep 05, 2014 ]
No, this unit or any other will not get rid of engine noise per say. It might provide a band aid however there is probably and underlining issue somewhere. Engine noise can be a number of things. Bad equipment ground to chassis, burned trace on circuit board(s), poorly designed gear, wire shorted to chassis. Hunting down noise is as much science as it is luck sometimes.
[ John  Sep 05, 2014 ]
I don't know that it would get rid of it.. It depends where the noise is originating. Most engine noise is eliminated with good solid ground connections and proper install..
[ MARC C  Sep 05, 2014 ]
Contrary to those trying to sell expensive cables, filters, etc., engine noise is usually caused by a ground plane issue. Ground all 12V system components, like your amps, head unit, powered crossovers, 360 (if you get one), etc. in the same place. Important note- the common ground you create can be an extra ground if one of the components is already grounded by it's chasis; in other words, there's no need to isolate everything. This has worked for me 99% of the time. In rare cases where you have really crappy components or a super noisy alternator and/or bad/loose alternator wiring or some other issue I've not encountered, the noise may not go fully away. If this is the case, the troubleshooting can get a bit more complex. Now, back to the 360; I purchased it, because I wanted to create a complex system but keep my fctory head unit. It's also VERY good at adjusting the soundstage.
[ BRADLEY L  Sep 05, 2014 ]
No it will not get rid of it.
[ Paul  Sep 05, 2014 ]

Loading articles...