Contact us
Close contact box

Rockford Fosgate P1-1X12

Punch P1 12" ported enclosed subwoofer

Item # 575P11X12

Rockford Fosgate's P1-1X12 ported enclosure fills your ride with juicy, high-volume bass, so you and your...

Rockford Fosgate's P1-1X12 ported enclosure fills your ride with juicy, high-volume bass, so you and your...

Lee
Need help?
Contact our Virginia-based experts.
Outlet

Item # 575P11X12

Ships free

In stock

$199.99 -$48.00 Outlet savings

$151.99

Other options

Lee
Need help?
Contact our Virginia-based experts.

About the Rockford Fosgate P1-1X12

Rockford Fosgate's P1-1X12 ported enclosure fills your ride with juicy, high-volume bass, so you and your passengers can rock out to the latest beats. The enclosure's Punch P1 12" woofer features a paper cone reinforced with Kevlar fibers, supported by a rubber surround. The heavy-duty motor assembly and advanced cooling vents allow this sub to handle up to 250 watts RMS without flinching.

Rockford Fosgate's P1-1X12 ported enclosure fills your ride with juicy, high-volume bass, so you and your passengers can rock out to the latest beats. The enclosure's Punch P1 12" woofer features a paper cone reinforced with Kevlar fibers, supported by a rubber surround. The heavy-duty motor assembly and advanced cooling vents allow this sub to handle up to 250 watts RMS without flinching.

Rugged 5/8" medium-density fiberboard construction means this enclosure will hold strong for fat, heavy bass. Industrial-grade black carpet provides a clean, finished look, and protects your trunk from nicks and scratches. This enclosure uses an advanced port design that promotes generous air movement, while reducing distortion-causing port noise, so you hear louder, deeper bass. Add an amp and some wiring, and feel the thick low end this enclosure adds to your ride.

READ LESS

Product highlights:

  • ported hatchback-style enclosure with one 12" Punch P1 subwoofer
  • 5/8" medium density fiberboard construction covered with black carpet
  • 4-ohm total impedance
  • power handling: 50-250 watts RMS
  • peak power: 500 watts
  • frequency response: 25-250 Hz
  • sensitivity: 86 dB
  • 19-1/8"W x 15-1/4"H x 16-5/8"D1 x 14"D2
  • warranty: 1 year
  • Our 60-day money-back guarantee
  • MFR # P1-1X12

What's in the box:

  • Vented subwoofer enclosure loaded with one Punch P1S4 12" Woofer
  • Installation and Operation Instructions

Scratch & Dent items may be missing non-essential accessories. In some cases the manufacturer's accessories have been replaced with generic equivalents.

Customer reviews

Loading reviews...

Rockford Fosgate P1-1X12 reviews

Average review:

16 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

<< >>

More details on the Rockford Fosgate P1-1X12

Pat M.

Features & specs

General
Woofer Size (inches) 12
Speakers Per Box 1
Woofer Material Kevlar/Paper
Enclosure Type Ported
Color Black
Pieces in System 1
Width (inches) 19-1/8
Height (inches) 15-1/4
Depth (inches) 16-5/8
Second Depth (inches) 14
Connector Type Spring post
Frequency Response 25-250 Hz
Power Range (Watts RMS) 250
Maximum Wattage 500
Sensitivity 86 dB
Impedance 4 ohms
Parts Warranty 1 Year
Labor Warranty 1 Year
The Rockford Fosgate P1-1X12 replaces these items:

Product Research

Features

Punch Woofer: The enclosure houses one front-firing Rockford Fosgate Punch P1S4-12 12" subwoofer. The 4-ohm, single voice coil sub features a StampCast steel frame, a Kevlar fiber reinforced paper cone, and NBR surround (Nitrile Butadiene Rubber). An anodized aluminum voice coil former and spider venting help keep the subwoofer cool.

Spider: A compliant linear spider made from tear and fatigue resistant poly-cotton improves mechanical stability under high excursion, maintaining consistent excursion characteristics.

Solid MDF Construction: The enclosure is constructed of high quality 5/8" MDF (medium-density fiberboard), which resists flexing and has anti-resonant qualities.

Vented Enclosure: The vented enclosure is aided by precision construction through computer design. The enclosure consists of one front firing 12" Punch P1 series subwoofer with a proprietary high-flow, low-noise port. The speaker terminals are located on the left side of the box (when facing the box). The box is covered in black carpet.

Tuned Port: The enclosure uses a front-firing proprietary high-flow, low-noise port to help produce deep and loud bass efficiently.

Box Carpeting: The enclosure is finished with high-density carpeting for superior durability. The carpet is black.

Speaker Terminal: The subwoofer enclosure uses one pair of high current, spring loaded binding posts. The binding posts are located on the left side of the box and will accept pin connectors, single or dual banana plugs, or bare wire up to 10 gauge.

Power Handling: The subwoofer can handle up to 250 watts RMS; 500 watts peak power.

CEA-2031 Compliant: Power handling on the P1S4-12 subwoofer conforms to CEA-2031 industry standards. This means the subwoofer has the capacity to handle its rated power under continuous demand, not just for an instant.

Dimensions: The depth dimensions listed in Features & Specs include the subwoofer's trim ring, which adds approximately 7/8 of an inch. The depth of just the enclosure is 15-3/4 inches at the base and 13-1/8 inches at the top.

Loading accessories...

Customer Q&A

Q
Crutchfield asked: Why did you buy this?
A
Rockford quality is by far the best in the market [ trent  Oct 20, 2018 ]
A
I have always had Rockford Fosgate Punch series subs in my vehicles and i could'nt resist the deal on this 12 [ Jordan  Dec 30, 2017 ]
A
name brand [ PETE  Dec 09, 2017 ]
A
I saw nothing but great reviews on it and compared it to a lot of other products. It's what I have been looking for, for my wife's car, it's a ported box, she'll like the fact that it doesn't take up a lot of room like the box in my car with my two sub's and she will be getting plenty of power these too. [ Cyrus  Nov 01, 2017 ]
A
Rockford Fosgate has always had a reputation for quality sound and durable subwoofers. This 12" subwoofer will make the perfect finishing touch to my Fosgate speakers and Prime 600x5 amp! [ Henry  Aug 22, 2017 ]
A
Great item [ Justin  May 15, 2017 ]
A
Powerful sub that will fit nicely in the Subie! [ Jason  Sep 29, 2016 ]
A
Needed bass in my car, do not want to take up too much space. [ JOHN  Jul 06, 2016 ]
A
Replacing my bandpass with just a ported that can play lower than the bandpass [ terri  Feb 29, 2016 ]
SHOW MORESHOW LESS

3 questions already asked

Q
What amp should I run with this?
[ Rylan  Dec 18, 2017 ]
2 answers
A
I got this exact same setup and bought it used. It came with a Rockville phenom rxa-t1 amp and it is bridged to 2ohms, I have no idea what kind of wattage it is getting as the amp is not advertised as being 2ohm stable when bridged but I am impressed with how hard it hits for a small single sub setup. I am used to my Fi 15 on 2kwrms in a 4cu ft box with a 32hz 6" aeroport in my gti that makes my roof and windshield flex and I didn't expect much from this when I put it in my other car but it does surprisingly well in a hatchback vehicle.
[ Rudy  Oct 01, 2019 ]
A
I use a pioneer champion GM-D8601 monoblock amp to run this. I've been running this setup now for 2 years. It hits hard and clean.
[ MATTHEW  Dec 18, 2017 ]
Q
Does this sub have a built-in amplifier or would I need to buy it separate?
[ Jakvanv18  Jul 24, 2017 ]
1 answer
A
Thanks for your question. There is no amplifier included. If you need help selecting the best amp for the sub I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system.
[ Kenny  Jul 25, 2017 ]  Staff
Q
You mentioned everything under the sun but how much it weighs! How much does it weigh?
[ Imani  Jul 23, 2017 ]
2 answers
A
In my other system I have a Fi BL15V3 and the sub alone weighs 50lbs and this setup with a Rockville phenom rxa-t1 amp mounted to the back of the box and it weighs considerably less than my Fi sub by itself so I would say that it's ~ 40lb with the amp on it.
[ Rudy  Oct 01, 2019 ]
A
Thanks for your question. Rockford did not list the weight so I don't have the exact weight. The shipping weight including packing is 46 pounds. Hope that is somewhat helpful.
[ Kenny  Jul 25, 2017 ]  Staff

Loading articles...

TOP