About the Rockford Fosgate Punch P1692S
Since you appreciate the highs in your music, the Rockford Fosgate Punch P1692S component system gives you a double shot two tweeters are included with each 6"x9" woofer! You can leave them in place over the woofer cone, or mount them separately with the included surface- or wedge-mounts. This versatility allows you to achieve maximum performance from the 3/4" aluminum dome tweeters you'll enjoy excellent dispersion of the highs and outstanding imaging.
Expect strong lows from the tough-as-nails mica-injected poly 6"x9" woofers. The sturdy stamped-steel baskets and polyurethane surrounds help control vibrations and provide smooth excursion so the woofers can keep the low tones rolling. If you're doing a custom install, the sharp-looking metal-toned grilles will give your ride a distinctive look. The outboard 2-way crossovers (3200 Hz at 12 dB per octave) feature protection circuitry that guards your tweeters against power surges.
Priced per system
- 6"x9" mica-injected polypropylene woofer
- polyurethane surround
- two 3/4" aluminum dome tweeters per woofer
- external 2-way crossover network (12dB/octave, 3,200 Hz)
- frequency response 50-22,000 Hz
- power range 8-60 watts RMS
- peak power handling 120 watts
- sensitivity 90 dB
- top-mount depth 3-1/16"
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # P1692S
What's in the box:
- 2 Woofers (each woofer has a dual tweeter mounting post with two tweeters installed and each tweeter has a surface-mount/wedge-mount top housing that holds the tweeter in place)
- 2 Grilles (each has an attached dual tweeter trim ring)
- 2 Crossovers
- 2 Single tweeter mounting posts
- 2 Phase plugs
- 4 Flush-mount top housings
- 4 Flush-mount/surface-mount bottom housings
- 4 Wedge-mount bottom housings
- 4 Flush-mount clips
- Four 12' lengths of speaker wire (each length has tinned wire on both ends)
- Six 1-5/8" Allen-head self-tapping screws
- Eight 1-1/4" Allen-head self-tapping screws
- Eight 1-1/4" Phillips-head self-tapping screws
- Eight 3/4" Phillips-head self-tapping screws
- 4 Threaded tweeter mounting posts
- 4 Hex nuts
- 16 Speed clips
- One 3mm Allen bit
- 2 Self-adhesive logo badges
- Installation & Operation manual
Thanks for submitting your review
More details on the Rockford Fosgate Punch P1692S
Features & specs
|Tweeter Design||3/4" Dome x 2|
|Woofer Composition||Mica-injected poly|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||90|
|Sensitivity at 2.83 volts||N/A|
|Frequency Response||50 - 22k Hz|
|Minimum RMS Wattage||8|
|Maximum RMS Wattage||60|
|Peak Power Handling (Watts)||120|
|Top-mount Depth (Inches)||3 1/16|
|Bottom-mount Depth (Inches)||3 7/16|
|Cutout Diameter or Length (inches)||0|
|Mounting Height (Inches)||0.394|
Mica-injected Polypropylene Woofer Cones: The woofer cones are constructed of mica-injected polypropylene. Mica adds strength and heat resistance to polypropylene, resulting in reduced distortion and improved reliability.
Polyurethane Surrounds: The polyurethane surrounds dampen unwanted harmonic distortion, giving you clearer bass performance.
Cold-rolled Steel Baskets: The cold-rolled steel baskets reduce unwanted reflections and resonance, resulting in accurate bass reproduction.
Magnet Covers: Each speaker features a magnet cover, which is removable for installation flexibility. With the magnet covers installed, the top-mount depth increases from 3.008" to 3.186", the bottom-mount depth increases from 3.402" to 3.58", and the magnet diameter increases from 3.566" to 4.463".
Note: The measurements in the Crutchfield database were taken with the magnet covers removed.
Aluminum Dome Tweeters: This system includes four 3/4" aluminum dome tweeters. The tweeters swivel in the different housings, so you can control the direction of your high frequencies.
Tweeter Mounting Options: The tweeters may be flush mounted, surface mounted, or wedge mounted (surface mounted at an angle).
|Flush Mount||Surface Mount||Wedge Mount (22.5 degrees)||Wedge Mount (40 degrees)|
|Mounting Depth||0.663"||0.658" (screw depth)||0.599" (screw depth)||0.594" (screw depth)|
Tweeter Mounting Posts: In addition to standard tweeter mounting options, the tweeter mounting posts let you mount a single tweeter (single tweeter mounting posts) or two tweeters (dual tweeter mounting posts) directly to the center of each midrange, giving you a standard coaxial or triaxial speaker. When using either set of tweeter mounting posts, the speaker mounting height increases from 0.394" to 0.779" and the tweeter protrusion increases from 0" to 0.385".
2-Way Crossover Network: Each crossover features a 12 dB/octave, 3.2 kHz high-pass filter for the tweeters and a 12 dB/octave, 3.2 kHz low-pass filter for the woofers.
Input/Output Connections: The crossover inputs and outputs are screw terminals. Each crossover has a single woofer output, and two separate outputs for each tweeter.
Dimensions: W=3.645", H=1.135", D=3.019"
Mounting Options: These speakers can be mounted as separate components, coaxial speakers, or triaxial speakers. When mounted as separate components, you can choose to use one tweeter or two tweeters with each midrange. The tweeter mounting posts let you mount a single tweeter (single tweeter mounting posts) or two tweeters (dual tweeter mounting posts) directly to the center of each midrange, giving you a standard coaxial or triaxial speaker. The Crutchfield database contains the measurements of the system mounted as separate components.