About the Rockford Fosgate P16-S
Rockford Fosgate hides this system's crossovers inside the woofer basket so you have less work to do during installation.
Rockford Fosgate's Punch Series P16-S component speaker system is a powerful upgrade from factory sound. Using a mineral-filled injection-molded polypropylene cone, the 6" woofer delivers substantial, accurate sound. Rockford Fosgate's signature VAST surround technique also expands the surface area of the cone, giving you better bass response than comparable speakers.
A separate 1" dome tweeter brings your music to life with clear, extended highs, and Rockford Fosgate includes hardware for flush- or surface-mounting each tweeter.
With most component systems, finding room for the crossovers in your doors or dash can be a chore. Rockford Fosgate simplifies the installation process by integrating the system's crossovers in the woofer baskets. Rockford Fosgate has also souped up their woofer baskets with their friendly FlexFit design. Rather than only providing rigid screw holes that may not always match up to your factory speaker opening, the FlexFit basket design uses slots on the outer edge of the woofer basket for an easier match when things don't line up perfectly.
Installation note: You'll need a pair of our universal backstraps to install the tweeters in the factory locations.
- component speaker system includes 2 woofers, 2 tweeters, and 2 woofer grilles
- 6" mineral-filled injection-molded polypropylene woofer
- butyl rubber surround
- 1" PEI dome tweeter
- crossovers built into woofer baskets
- Vertical Attach Surround Technique (VAST™) increases cone area
- handles up to 60 watts RMS (120 watts peak power)
- frequency response: 60-22,000 Hz
- sensitivity: 87.2 dB
- top-mount depth: 1-15/16"
- grilles included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # P16-S
What's in the box:
- 2 Woofers
- 2 Woofer grilles
- 2 Tweeters (6" speaker wire attached terminated with female quick-slide connectors)
- 2 Front flush mount brackets
- 2 Rear flush mount brackets
- 2 Angled surface mounting housings
- 2 Tweeter trim rings
- Two M4x25mm Machine screws
- Two M4x10mm Machine screws
- Two M4x15mm Stud bolts
- Eight 1-1/4" Allen head screws
- 3mm Allen head bit
- 8 Speed clips
- Two 39" Lengths of tweeter speaker wire (each with male quick slides on one end and female quick slides on the other)
- Installation/Operation Instructions (English/ French/ Spanish/ German/ Italian)
See the difference between "Open Box" and "Scratch & Dent" Outlet items
Rockford Fosgate P16-S reviews
Thanks for submitting your review
More details on the Rockford Fosgate P16-S
Features & specs
|Tweeter Design||1" Dome|
|Woofer Composition||Mineral-Filled IMPP|
|Woofer Surround||Butyl Rubber|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||87.2|
|Sensitivity at 2.83 volts||90.2|
|Frequency Response||60 - 22k Hz|
|Minimum RMS Wattage||---|
|Maximum RMS Wattage||60|
|Peak Power Handling (Watts)||120|
|Top-mount Depth (Inches)||1 15/16|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||5|
|Mounting Height (Inches)||0.423|
Injection-Molded Polypropylene Woofers: The woofer cones are mineral filled, injection-molded polypropylene. This molding process assures a uniform cone thickness for superior linearity and clarity. It is also light weight and rigid for decreased distortion and improved bass response.
Klippel Verified: The Klippel distortion analyzer, a device that uses a laser and sophisticated software to do large-scale analysis of drivers in motion, lets Rockford Fosgate optimize the speaker's motor structure, voice coil alignment, and suspension to yield the best possible performance.
VAST Surround: The Vertical Attach Surround Technique (VAST) increases a speaker's effective radiating cone area without increasing the size of the basket.
FlexFit Basket: The FlexFit frame utilizes slots (where possible) instead of single screw sized holes; allowing slight adjustment of the speaker when mounted.
Size Classification Note: Rockford Fosgate calls this size woofer a 6". Because its measurements match traditional industry standard 6-1/2" speakers, and it fits traditional 6-1/2" applications, Crutchfield has typically referred the P-16S as a 6-1/2". Please enter your vehicle information to confirm fit.
PEI Dome Tweeters: The 1" dome tweeters are made of Poly-Ether-Imide (PEI); PEI is a polymer film that produces a wide soundstage for superior imaging.
Mounting: The tweeters have multiple mounting configurations; choose flush or angled surface mount. The surface mount housing can be positioned at a 10° or 30° angle. Depending on the mount used, the installed dimensions are:
|Flush||Surface 10°||Surface 30°|
|Mounting Depth||0.912"||Screw Depth||Screw Depth|
Crossovers: The high-pass crossovers are integrated into the baskets of the woofers and the tweeters are wired to a second set of terminals on the woofer using the included wire. The crossover slope is 12dB per octave.
Speaker Terminals: These speakers have 0.25" wide positive (+) terminals and 0.187" wide negative (-) terminals, which are too large for the vehicle-specific speaker harnesses Crutchfield supplies for many vehicle applications. We recommend that a pack of assorted female quick slides (item number 120FQS10PK, sold separately) be purchased and spliced to the harnesses to adapt them to the speaker terminals.
The Rockford Fosgate P16-S replaces these items
- 6-1/2" mineral-filled polypropylene woofer
- 1" polyetherimide (PEI) dome tweeter
- power range: 6-60 watts RMS (120 watts peak power)
13 questions already asked