About the Rockford Fosgate P1L-2X10
The Rockford Fosgate P1L-2X10 enclosure houses a pair of Punch P1 10" subs that'll put big bass in your ride. Rockford Fosgate used their Loudspeaker Enclosure Analysis Program to create an enclosure that'll draw every ounce of bass out of its two subs.
You'll find top-rate construction here, from the rugged 5/8" medium-density fiberboard and heavy-duty black carpet to the reliable Rockford Fosgate wiring. The enclosure's advanced port design promotes big-time air flow without bothersome port noise, so you get increased accuracy and efficiency.
The enclosure's dual Punch P1 10" woofers sport polypropylene cones, poly-foam surrounds, powerful magnets, and advanced cooling vents that combine to handle up to 300 watts RMS total without flinching. Add an amp and some wiring, and feel the thick low end this enclosure adds to your vehicle.
- ported hatchback-style enclosure with two 10" Punch P1 subwoofers
- 5/8" medium density fiberboard construction covered with black carpet
- 4-ohm total impedance
- power handling: 100-300 watts RMS (600 watts peak power)
- frequency response: 33-200 Hz
- sensitivity: 90 dB
- 31-1/4"W x 12-1/4"H x 16"D1 x 13-3/4"D2
- warranty: 1 year (woofers only)
- Our 60-day money-back guarantee
- MFR # P1L-2X10
What's in the box:
- Vented subwoofer enclosure loaded with two Punch P1 10" woofers
- Installation and Operation Instructions
Thanks for submitting your review
More details on the Rockford Fosgate P1L-2X10
Features & specs
|Woofer Size (inches)||10 x 2|
|Speakers Per Box||---|
|Pieces in System||1|
|Second Depth (inches)||13-3/4|
|Connector Type||Binding posts|
|Frequency Response||33-200 Hz|
|Power Range (Watts RMS)||300|
|Parts Warranty||1 Year (woofer only)|
|Labor Warranty||1 Year (woofer only)|
Two Punch Stage 1 Woofers: The enclosure houses two front-firing 10" 8-ohm voice coil woofers. The cones are constructed of high modulus, closed conical polypropylene. Polypropylene is lightweight and strong, giving the woofers high power handling capabilities with low distortion.
High Density Poly-Foam Surround: A high density compressed half-roll sealed poly-foam surround allows Punch woofers to produce a more linear excursion resulting in more bass output.
Spider: A compliant linear spider made from tear and fatigue resistant poly-cotton improves mechanical stability under high excursion, maintaining consistent excursion characteristics.
Voice Coil: The woofers use high temperature voice coils with a spun-laced Nomex insulating reinforcement collar which offers superior heat dissipation over other commonly used materials.
Basket: The Rockford Punch woofers feature sturdy 16-gauge geometrical compound bend frames for added stability.
Solid MDF Construction: The enclosure is constructed of high quality 5/8" MDF (medium-density fiberboard), which resists flexing and has anti-resonant qualities.
Vented Enclosure: The vented enclosure is aided by precision construction through computer design. The enclosure consists of two front firing 10" Punch Stage 1 woofers with a centered, proprietary high-flow, low-noise port. The speaker terminals are located on the left side of the box (when facing the box). The box is covered in black carpet.
Tuned Port: The enclosure uses a front-firing proprietary high-flow, low-noise port to help produce deep and loud bass efficiently.
Box Carpeting: The enclosure is finished with high-density carpeting for superior durability. The carpet color is black.
Speaker Terminal: The subwoofer enclosure uses one pair of high current, spring loaded binding posts to connect your amplifier to the speaker box for maximum current transfer. The binding posts are located on the left side of the box and will accept pin connectors, single or dual banana plugs, or bare wire up to 12 gauge.
Wiring: The two 8-ohm voice coil Punch Stage 1 woofers are wired in parallel inside the box to present a 4-ohm load at the enclosure's speaker terminals.
Power Handling: Combined, the subwoofers can handle up to 300 watts RMS; 600 watts peak power.