Rockford Fosgate P2D412

Features
Enclosure Compatibility

Features

Woofer: The cone is constructed of high modulus, thermoformed polypropylene with a parabolic injected molded ABS/Acrylic dustcap. Polypropylene is lightweight and strong, giving the woofer high power handling and low distortion.

High Density Poly-Foam Surround: A high density compressed half-roll sealed poly-foam surround allows Punch woofers to produce a more linear excursion resulting in more bass output.

Parabolic Injection Molded Dustcap: By bonding a ABS/Acrylic parabolic dust cap of equivalent size to the cone body, a balanced geometrical structure is created. This system reduces piston flex and eliminates cone distortion.

Linear Spider: A compliant linear spider made from tear and fatigue resistant poly-cotton improves mechanical stability under high excursion, maintaining consistent excursion characteristics. This eliminates the need for a "break-in period." The spider rests in a vented spider cavity to reduce heat build.

High Temp Voice Coil: The woofer uses an aluminum 2" 4-layer voice coil with a spun-laced Nomex insulating reinforcement collar which offers superior heat dissipation over other commonly used materials. The hard-anodized finish increases the former's strength. These factors combine to improve the overall power handling characteristics of the subwoofer.

Double Stacked Magnet Motor Assembly: The stacked magnet assembly is used to create a powerful linear motor with increased excursion capability for superior bass output.

Optimized Motor Magnetics: The Punch2 woofer uses an extended pole piece and bumped backplate design to optimize its performance.

Venturi-Effect Cooling System: The Venturi-Effect Cooling system gradually reduces the air-flow exhaust path area and increases the air speed across the key thermal masses of the woofer's motor parts which helps reduce voice coil temperatures, improves thermal dissipation and improves overall reliability of the speaker.

Basket: The Rockford Punch2 woofer features a sturdy 16-gauge geometrical, compound bend frame using a multi-point high-temp/high-strength neck joint bonding technique for added stability.

Spring Post Assembly: The woofer features two custom insulated/isolated compression input terminal assemblies with embedded flexible, stitched tinsel lead wires that can withstand extreme duty cycles, fatigue and high current. The heavy-duty 10-gauge nickel plated spring posts will accept pin connectors and bare wire.

Cast Aluminum Motor Cover: The woofer features a protective diamond cut cast aluminum motor and magnet cover for improved heat dissipation.

Decorative Ring: For an added decorative look the woofer comes supplied with a PVC decorative ring that mounts over the flange of the woofer. When using the PVC ring the woofer is first mounted into place with four screws and then the ring is set on top the woofer, aligning the final four holes of the woofer with ring. The other four screws are used for these holes to mount the ring and woofer to the enclosure. The decorative ring increases the mounting height of the woofer to 0.756".

Reverse Mounting: The Rockford Punch2 woofer can be mounted in either direction. The mounting ring that is supplied with the woofer provides and easy and cosmetically finished look regardless of the mounting direction.

Enclosure Compatibility

Recommended Sealed Box Volume: The sealed box sizes recommended by Rockford Fosgate range from 0.70 cu/ft to 1.80 cu/ft. Within this range, the ideal size recommended by Rockford Fosgate is 1.02 cu/ft, so this is the enclosure recommended by Crutchfield.

Recommended Vented Box Volume: The vented box size recommended by Rockford Fosgate is 1.79 cu/ft, so this is the enclosure recommended by Crutchfield. One 4" diameter x 10" long port should be used with the 1.79 cu/ft enclosure.