Chat
Contact us
Close contact box
Connect ID #
280 175 387 4
Connect ID #
280 175 387 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Rockford Fosgate Punch P3S-1X10 Sealed truck-style enclosure with one 10" Punch Stage 3 shallow subwoofer

Item # 575P3S1X10

Regular cab truck owners — Rockford Fosgate feels your pain.

Regular cab truck owners — Rockford Fosgate feels your pain.

14 questions - 18 answers

Item # 575P3S1X10

In stock
$309.99

About the Rockford Fosgate Punch P3S-1X10

John Pollard

Built tough

Regular cab truck owners — Rockford Fosgate feels your pain. They've designed their Punch Stage 3 shallow enclosures so you don't have to suffer without good bass. And they build these boxes for strength and durability, with a computer-optimized design that uses medium-density fiberboard and thick carpeting.
Side view of P3S-1X10 loaded subwoofer enclosure

Built tough

Regular cab truck owners — Rockford Fosgate feels your pain. They've designed their Punch Stage 3 shallow enclosures so you don't have to suffer without good bass. And they build these boxes for strength and durability, with a computer-optimized design that uses medium-density fiberboard and thick carpeting.

Slim box, big bass

The P3S-1X10 sealed enclosure measures only 6-1/4" deep at its bottom, so it'll fit in the space behind many regular truck cab seats. It comes preloaded with a single 10" Punch Stage 3 shallow dual voice coil subwoofer that'll handle up to 300 watts RMS. The enclosure's low 1-ohm total impedance means it'll drive your amp to its max — just make sure you pair it with a 1-ohm stable amplifier. 

READ LESS

Product highlights:

  • sealed truck-style enclosure with one 10" Punch Stage 3 shallow dual voice coil subwoofer
  • 1/2" medium density fiberboard construction covered with heavy-duty carpet
  • 1-ohm total impedance
  • power handling: 100-300 watts RMS (600 watts peak power)
  • frequency response: 40-250 Hz
  • sensitivity: 83 dB
  • 19-1/8"W x 13-5/8"H x 6-1/4"D1 x 3-3/8"D2
  • warranty: 1 year
  • MFR # P3S-1X10

What's in the box:

  • Single 10" Punch Stage-3 shallow enclosure
  • 2 Metal mounting brackets
  • Four 5/8" Self-tapping mounting screws
  • Installation/Operation manual

Customer reviews for Rockford Fosgate Punch P3S-1X10

Loading reviews...

Average review:

5.0 out of 5 stars
18 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the Rockford Fosgate Punch P3S-1X10

Pat M.

Features & specs

General
Woofer Size (inches) 10
Speakers Per Box 1
Woofer Material Anodized Aluminum
Enclosure Type Sealed
Color Black
Pieces in System 1
Width (inches) 19-1/8
Height (inches) 13-5/8
Depth (inches) 6-1/4
Connector Type Spring posts
Frequency Response 40-250 Hz
Power Range (Watts RMS) 300
Maximum Wattage 600
Sensitivity 83 dB
Impedance 1 ohms
Parts Warranty 1 Year
Labor Warranty 1 Year
The Rockford Fosgate Punch P3S-1X10 replaces these items:

Product Research

Features

Punch Woofer: The enclosure houses one front-firing Rockford Fosgate Punch P3SD2-10 shallow mount 10" subwoofer. The dual 2-ohm voice coils are internally wired in parallel to present a 1-ohm load. The sub features a StampCast basket, an Anodized aluminum cone, and Santoprene surround. The integrated spider venting helps keep the subwoofer cool.

Enclosure: The truck-style sealed enclosure is constructed with 1/2" MDF and covered with high density black carpet. The enclosure features high current spring posts of the right side. The box is shallow enough to fit behind the front seat of many standard cab pickups.

Box Carpeting: The enclosure is finished with high-density black carpeting for superior durability.

Speaker Terminal: The subwoofer enclosure uses one pair of high current, spring loaded binding posts. The binding posts are located on the right side of the box and will accept pin connectors, single or dual banana plugs, or bare wire up to 10 gauge.

Power Handling: The subwoofer can handle up to 300 watts RMS, 600 watts peak.

CEA-2031 Compliant: Power handling on the P3S-1x10 conforms to CEA-2031 industry standards. This means the subwoofer has the capacity to handle its rated power under continuous demand, not just for an instant.

Dimensions: The depth dimensions listed in Features and Specs include the subwoofer's trim ring, which adds approximately 1 inch. The depth of just the enclosure is 5-1/4 inches at the base and 3-3/8 inches at the top.

Loading accessories...

Customer Q&A

14 questions already asked

Q
I have an old punch 40i. Will it void the warranty if I pull the speaker and wire the voice coils in series in order to run 4 ohm mono?
chad  Mar 23, 2023
1 answer
A
Greetings Chad, and thank you for your question. If purchased from a Rockford authorized dealer, and you have proof of purchase, the warranty would not be voided if you pulled out the included sub, and re-wired it in series to be 4 ohm. Now, you still want to stick with the recommended power of the sub as well.
hogan  Mar 23, 2023 (Staff)
Q
Is this a good sub for listening to metal music?
chris  Mar 21, 2023
1 answer
A
This sub would be great for listening to almost any type of music including metal. The Rockford Fosgate Punch P3S-1X10 can handle up to 300 watts rms at 1 ohm, it will give you a noticeable amount of bass compared to something that would come in a stock car system but nothing too overkill. This in a sealed enclsoure which will give you a more tight, accurate sounding bass which is typically better for listening to metal.
allison  Mar 21, 2023 (Staff)
Q
Will this work with the Rockford Phosgate P1000x5?
jeremy  Jan 11, 2022
1 answer
A
Thanks for your question. For information on selecting the best amp/sub combo I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the models and help you make the best choice for your system.
kenneth  Jan 11, 2022 (Staff)
Q
Will this set up fit 2021 GMC SIERRA AT4 underneath the back seat easily? I want to be able to lay seat all the way down.
tatum  Oct 22, 2021
1 answer
A
For additional details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
kenneth  Oct 23, 2021 (Staff)
Q
Would this function well with a cobalt 600x4 ? concerned about the impedance...
charlie  Apr 10, 2020
3 answers
A
Brand new expensive speaker that I only use when I get off of work that only last 2 years no I'm not very happy with the quality I had it installed at your shop
vincent scott  Apr 11, 2020
A
And I too happy right now not really
vincent scott  Apr 11, 2020
A
Well one of them's not working right now I have to come into the shop and figure out why it's not working if that's your answer have fun with it
vincent scott  Apr 11, 2020
Q
F150 2017 super crew. Will it fit?
shelton  Feb 26, 2020
1 answer
A
I have a 2013 f150 super crew and it did not fit very good under my back seat however the kicker comp Rt fits under the back seat nicely
michael brandon  Apr 10, 2020
Q
Would it be possible to run two of these enclosures together, and if so what amplifier could support that?
ivan  Sep 01, 2019
1 answer
A
Thanks for your question. For information on selecting the best amp I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system.
kristina  Sep 10, 2019 (Staff)
Q
Since this is a DVC, can the voice coils be wired in a series to equal a final impedance of 2 ohm?
hunter  Jul 30, 2018
1 answer
A
Yes you just have to take it out of the box and buy extra speaker wire. Thats what i did pretty easy.
adam  Jul 31, 2018
Q
What amp would match good with this sub since the one mentioned is no longer in production?
mason  Apr 19, 2017
1 answer
A
Thanks for your question. For information on selecting the best amp for your sub I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system.
kenneth  Apr 19, 2017 (Staff)
Q
Would this fit on my 2004 f350 4 door ?
octavio  Feb 09, 2017
1 answer
A
You can check to see if this will fit your vehicle by using our Outfit My Car tool: http://www.crutchfield.com/car/carselector.aspx For additional details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
kristina  Feb 10, 2017 (Staff)
Q
I have a 1979 chevy c10 do you guys think this subwoofer will fit behind the seat (seats do not fold forward)?
adam  Aug 26, 2016
2 answers
A
I don't think so
rafi  Aug 26, 2016
A
It fit behind my 2008 Silverado with no problems.
shannon  Aug 26, 2016
Q
I have a 2016 tundra sr5 double cab will this fit behind my back seats?
robert  Jul 14, 2016
2 answers
A
I'm not sure it will because your back seat is fixed. I have a 2013 Tundra with the adjustable backseat and it fits perfect.
francisco  Jul 17, 2016
A
It fits perfectly in the back of my seats of a 86 Toyota pick up single cab
noah  Jul 15, 2016
Q
Can this sub be ran by a JL Audio JX250/1? Or does it need more power?
robert  Sep 07, 2015
1 answer
A
The JL Audio amp would likely be enough power, however the issue is going to be with the Rockford sub being 1-ohm, and the JL amp not being 1-ohm stable. I'd recommend contacting an Advisor by phone (1-800-324-9695) or online chat to discuss the components you have and the ones you plan to get. They will be able to help make sure everything will match up properly.
jeff  Sep 10, 2015 (Staff)
SHOW MORESHOW LESS

Loading articles...

Compare the sound