Contact us
Close contact box

Rockford Fosgate P3SD4-10

Punch Stage 3 shallow-mount 10" subwoofer with dual 4-ohm voice coils

Item # 575P3S410

Rockford Fosgate's Punch Stage 3 subwoofers come from a long line of high-performance subs that deliver real deal bass.

Read more from Crutchfield writer, John P.

Ships free today

In Stock
$164.99 each

Other options

About the Rockford Fosgate P3SD4-10

Rockford's bass pedigree

Rockford Fosgate's Punch Stage 3 subwoofers come from a long line of high-performance subs that deliver real deal bass. Now, shallow-mount Punch Stage 3 subs make it easier to get impressive low end in smaller or hard-to-fit vehicles.

Rockford's bass pedigree

Rockford Fosgate's Punch Stage 3 subwoofers come from a long line of high-performance subs that deliver real deal bass. Now, shallow-mount Punch Stage 3 subs make it easier to get impressive low end in smaller or hard-to-fit vehicles.

Side view of P3SD4-10 shallow subwoofer

Advanced engineering

The P3SD4-10 shallow-mount 10" sub hangs with its bigger brethren, thanks to advanced materials and engineering. Rockford uses an anodized aluminum cone and dust cap that makes the woofer light and easier to drive, yet rigid enough to maintain its shape when you turn it up loud. The M-Roll Santoprene™ surround also provides excellent excursion for maximum output while being durable enough to last.

Powerful bass for a tight space

A low-profile frame houses the sub, with abundant venting to battle overheating and thermal breakdown. At 3-9/16 inches deep, this sub will fit into places where no bass has gone before — just build a custom enclosure or find a suitable box. The dual 4-ohm voice coils allow you to wire up multiple subs or to coax optimum performance from your amplifier.

READ LESS

Product highlights:

  • 10" shallow-mount subwoofer with dual 4-ohm voice coils
  • anodized aluminum cone with M-Roll Santoprene™ surround
  • power range: 50-300 watts RMS (150 watts per voice coil)
  • peak power handling: 600 watts
  • frequency response: 40-250 Hz
  • sensitivity: 83 dB
  • top-mount depth: 3-9/16"
  • sealed box volume: 0.40-1.00 cubic feet
  • ported box volume: 1.00 cubic feet
  • grille not included
  • warranty: 1 year
  • Our 60-day money-back guarantee
  • MFR # P3SD4-10
KEEP READINGREAD LESS

What's in the box:

  • One shallow-mount 10" Dual 4-ohm voice coil woofer
  • 1 Aluminum trim ring
  • Eight 1-1/8" Allen head self-tapping screws
  • 4mm Allen head bit
  • Installation and Operation manual (English/ French/ Spanish/ German)

Customer reviews

Loading reviews...

Rockford Fosgate P3SD4-10 Reviews

Average Customer Review(s):

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

More details on the Rockford Fosgate P3SD4-10

Product Research

Features
Enclosure Compatibility

Features

Shallow Mount Design: The Rockford Fosgate Punch P3SD4-10 Shallow Subwoofer is designed and engineered with a more shallow motor assembly which reduces the overall depth of the woofer, allowing it to fit in smaller locations in your vehicle. The P3SD4-10 used an anodized aluminum cone and Santoprene surround. An anodized aluminum voice coil former and spider venting help keep the subwoofer cool.

Dual Voice Coils: This woofer features dual 4-ohm voice coils for wiring flexibility. When the voice coils are wired in parallel, the woofer presents a 2-ohm load. When the voice coils are wired in series, the woofer presents an 8-ohm load.

CEA-2031 Compliant: Power handling on the P3SD4-10 subwoofer conforms to CEA-2031 industry standards. This means the subwoofer has the capacity to handle power under continuous demand, not instantaneous power handling, that over time, can damage voice coils.

FlexFit Basket: The Flex Fit frame utilizes slots (where possible) instead of single screw sized holes; allowing slight adjustment of the speaker when mounted.

VAST Surround: The Vertical Attach Surround Technique (VAST) increases a speaker's effective radiating cone area without increasing the size of the basket.

Anodized Aluminum Voice Coil Former: Aluminum voice coil formers offer superior heat dissipation over other commonly used materials. The hard-anodized finish increases the former strength. These two factors combine to improve the overall power handling characteristics of the subwoofer.

Spring Post Assemblies: The woofer features custom insulated/isolated compression input terminals with attached flexible, 16-gauge stitched tinsel lead wires that can withstand extreme duty cycles, fatigue and high current. The heavy-duty spring posts will accept pin connectors, single banana plugs, and bare wire up to 10-gauge.

Trim Ring: For added cosmetic appeal the woofer comes with an aluminum trim ring that mounts over the flange of the woofer. When using the trim ring, the woofer is first mounted with four screws, then the ring is mounted over the woofer, aligning the final four holes of the woofer with ring. The other four screws are used in these holes to mount the ring and woofer to the enclosure. The trim ring increases the top-mounting height of the woofer to 1.0 inch and the ring diameter is 11.3 inches.

Break-In Period: Due to the design of the Rockford Fosgate P3 Shallow subwoofer, a 24 to 48 hour break-in period is required to allow for maximum excursion and low frequency extension. The shallow woofer suspension is intentionally designed to optimize once the internal components are exercised under normal music listening conditions.

Enclosure Compatibility

Sealed Box Volume: The sealed box size range recommended by Rockford Fosgate is 0.40 to 1.0 cubic feet. Within this range, the ideal recommended size is 0.5 cubic feet, resulting in a 3dB down point of 46.9 Hz and a Qtc of 0.90.

Vented Box Volume: The vented box size recommended by Rockford Fosgate is 1.0 cubic feet. One 4" diameter x 12" long port should be used, resulting in a tuning frequency of 47.5 Hz and a 3dB down point of 36 Hz.

Loading accessories...

Customer Q&A

Q
Crutchfield asked: Why did you buy this?
A
They were compatible with the box I ordered for my truck. [ brandon  Sep 23, 2018 ]
A
replacment for stolen [ howard  Aug 13, 2018 ]
A
Just needed some speakers [ Zachery  Jun 14, 2018 ]
A
Always like fosgate equipment needed shallow subs RMS on these subs match my amplifier [ James  Jul 20, 2017 ]
A
Only had a small space ,so we stuffed in as much thump as we could. [ Tim  May 08, 2016 ]
SHOW MORESHOW LESS

2 questions already asked

Q
My amp recommends at least a 4ohm load. Should I get the 4ohm DVC version or the 2ohm? I should be able to wire this to get 8ohms but is that optimal when i could wire the 2ohm dvc version to be a 4ohm load at the amp?
[ Isaac  Aug 26, 2016 ]
1 answer
A
Thanks for your question. For information on selecting the best sub for your amp I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the models and help you make the best choice for your system.
[ Kenny  Aug 26, 2016 ]  Staff
Q
I just purchased (2) RF P3SD4-10's and the box for under my back seat in my 2009 F-150. What amp should I purchase? (Watts, ohms & how should I wire it with my new (2) 4 ohm subs
[ Mike  Oct 16, 2014 ]
1 answer
A
Thanks for your question. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system.
[ Krissy  Oct 17, 2014 ]  Staff

Loading articles...

TOP