About the Rockford Fosgate PM282W
Powerful Punch sound for your boat
Powerful Punch sound for your boat
There's a lot more to building a great wakeboard tower speaker than slapping a woofer and a tweeter into a can. Rockford Fosgate's Punch Series PM282 wakeboard tower speakers feature 8" woofers and aluminum dome tweeters that handle up to 100 watts RMS. The result is crisp, powerful sound in or out of the boat. Whether you're at the helm or on the end of a ski rope, you'll be amazed at how loud and clear these Punch speakers are on the water.
Sleek, sturdy enclosures made for marine use
Each rugged UV-, moisture-, and salt-resistant speaker is housed in a high-density polyethylene enclosure with a sturdy stainless steel grille. These enclosures meet tough UV and Salt-Fog industry standards so they'll hold up for many seasons on the water. A quick-release design makes it easy to remove them for cleaning or storage.
To install your Rockford Fosgate speakers on a tubular wakeboard tower, you'll need cast-aluminum, variable diameter (1-1/2" to 2-3/4") C-clamps (sold separately). With the clamps in place, you can rotate the speakers up to 359 degrees, sending the sound in the direction you want.
- 8" marine speaker enclosures (pair)
- 1" bridge-mounted aluminum dome tweeters
- high-density sealed polyethylene enclosures with stainless steel grilles
- injection-molded mineral-filled polypropylene woofers with Thermo-Plastic Elastomer surrounds
- true marine-grade design stands up to the elements
- 16 AWG 2-pin quick-disconnect connectors
- power handling: 100 watts RMS (200 watts peak power)
- frequency response: 40-20,000 Hz
- speaker sensitivity: 90 dB
- dimensions: 9-1/8"W x 10-1/4"W x 14-3/16"L
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # PM282W
What's in the box:
- 2 White 8" Marine wakeboard tower speakers
- 2 Stainless mounting couplers
- Two 16" speaker wire harnesses (with 2-pin Molex plug)
- Two 7.5" wire safety lanyards
- 2 Lanyard washers
- 4 Allen-head bolts (M8 x 25mm)
- 4 Hex nuts (8mm)
- Security Torx wrench
- 4 Plastic wire grommets
- Owner's Manual
Rockford Fosgate PM282W reviews
I haven't install these speakers yet, but they seem to be built very sturdy. Look awesome! Ready to get them hooked up
1 of 1 found this helpful
More details on the Rockford Fosgate PM282W
Features & specs
|Tweeter Composition||Aluminum alloy|
|Woofer Composition||Mineral-filled IMPP|
|Woofer Surround||Thermo-plastic Elastomer|
|Parts Warranty||2 Years|
|Labor Warranty||2 Years|
93 dB at 2.83 volts |
90 dB at 1 watt
|Max RMS Power Handling||100|
|Peak Power Handling (Watts)||200|
Overview: The Rockford Fosgate Punch M2 PM282W wakeboard tower speakers contain two sealed enclosures made of white high density poly-ethylene, each housing one 8" woofer and one 1" dome tweeter. The enclosure is capped off by a stainless steel sport grille. The speakers are designed to attach to your boat's wakeboard tower using the included hardware. Both the speakers and enclosures are treated with UV inhibitors and conform to UV and Salt-Fog industry standards.
Drivers: The 8" woofers use injection molded, mineral filled polypropylene cones and TPE (Thermo-Plastic Elastomer) surrounds. This molding process assures a uniform cone thickness for superior linearity and clarity. It is also lightweight and rigid for decreased distortion and improved bass response. The bridge-mounted 1" component-grade coated aluminum alloy dome tweeters deliver extended high frequencies for clean, loud audio that can be heard and enjoyed by everyone.
ICC Crossover: The ICC (Integrated Concealed Crossover) protects the crossover by concealing it inside the basket. The crossover is 12 dB/octave high pass, 6 dB/octave low pass, and has an integrated tweeter protection circuit.
Mounting: The PM282W speakers use adjustable cast aluminum mounts and stainless steel hardware, designed for mounting each speaker on a flat surface. A steel wire safety lanyard is included for securing the speakers. When mounted, the speaker can swivel 359°, and locked in place using the supplied Security Torx bolt. Optional matching tower speaker clamps can be added for mounting the speakers to 1.5" to 2.75" diameter tubing. When not in use, you can cover the speakers with the optional PM28-SPF neoprene covers.
Q Crutchfield asked: Why did you buy this?
1 question already asked