Contact us
Close contact box
Connect ID #
767 846 251 3

Call center hours

Connect ID #
767 846 251 3
Chat
All finished with your chat session?

We’ll email you a transcript of this conversation for your records.

We're sorry, chat is not available at this time. Please visit our Support page to find the help you need.

Please enter your name.  
Please enter a valid email address. Why is this required?
Please enter your US phone number.  

For Tech Support, call 1-800-955-9091

Thank you, !
Our conversation will be emailed to
Please enter a question  
Please select an email topic.  

Looking for tech support?
Please call us at 1-800-955-9091

Need help now?
Call an advisor: 1-888-955-6000

Please enter your name.  
Please enter your US phone number.  
Please enter an email.  
Please enter an email.  
Please enter a message  

Calls may be recorded for training and quality control purposes.

Crutchfield call centers are located in Virginia USA.

Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

Crutchfield call centers are located in Virginia USA.

Rockford Fosgate RFPEQU

Universal Punch EQ with wired remote

Item # 575RFPEQU

Rockford Fosgate's RFPEQU universal Punch EQ restores the sparkle and impact to your music that road noise...

Rockford Fosgate's RFPEQU universal Punch EQ restores the sparkle and impact to your music that road noise...

Kristina
Need help?
Contact our Virginia-based experts.
Outlet

Item # 575RFPEQU

Ships free

Out of stock

$74.99 -$7.50 Outlet savings

$67.49

Other options

Kristina
Need help?
Contact our Virginia-based experts.

About the Rockford Fosgate RFPEQU

Put some Punch in your system

Rockford Fosgate's RFPEQU universal Punch EQ restores the sparkle and impact to your music that road noise usually covers up. Developed over thirty years ago for their  popular Punch amplifiers, Rockford Fosgate now brings you this handy remote EQ system in a universal, stand-alone version that works with almost any aftermarket car amplifier.

Put some Punch in your system

Rockford Fosgate's RFPEQU universal Punch EQ restores the sparkle and impact to your music that road noise usually covers up. Developed over thirty years ago for their  popular Punch amplifiers, Rockford Fosgate now brings you this handy remote EQ system in a universal, stand-alone version that works with almost any aftermarket car amplifier.

It's a line output converter and a high-voltage line driver, too

This 2-channel treble/bass booster accepts either RCA or speaker-level inputs, so you can use it with your car's factory receiver. Whether taking a low- or high-level input, the RFPEQU creates a hefty output (up to 10 volts), guaranteeing a strong and clean signal for your amplifier to handle.

READ LESS

Product highlights:

  • 2-channel universal remote Punch EQ
  • remote knob and 16.5-foot cable included
  • bass/treble boost: 0-18 dB at 45 Hz and 0-14 dB at 12,500 Hz
  • line output converter (LOC) — accepts speaker-level inputs
  • high-voltage line driver — up to 10 volts RMS output
  • gain control matches level to source
  • signal sensing turn-on with speaker-level inputs
  • module dimensions: 4-3/4"W x 1-1/8"H x 4-7/8"D (with wiring)
  • remote dimensions: 1-7/16"W x 1-1/4"H x 3-1/8"D (with wiring)
  • warranty: 1 year
  • Our 60-day money-back guarantee
  • MFR # RFPEQU

What's in the box:

  • Rockford Punch EQ wired remote
  • Hideaway universal PEQ module
  • 16.5' remote cable with RJ-45 connectors on both ends
  • 12" Power harness
  • 12" Signal input harness
  • LED with attached 8" power/ground harness
  • Additional remote front panel
  • Mounting bracket
  • Two 1/2" Mounting screws
  • Flat washer
  • Nut
  • Installation instructions

See the difference between "Open Box" and "Scratch & Dent" Outlet items

Customer reviews

Loading reviews...

Rockford Fosgate RFPEQU reviews

Average review:

4 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

<< >>

More details on the Rockford Fosgate RFPEQU

Russ B.

Product Research

Features

Overview: The Rockford Fosgate universal Punch EQ is a two band equalizer wired inline between your source and amplifier. The single rotary knob on the wired remote simultaneously adjusts the bass (0 to +18 dB at 45 Hz) and treble (0 to +14 dB at 12.5 kHz).

Auto Turn-on: When using a speaker level input, a signal sensing circuit in the hideaway module automatically turns the unit on when the source signal is present.

Line Driver: The Punch EQ's built-in high voltage (10 volts RMS) line driver improves dynamic range, signal-to-noise ratio, and noise rejection.

LEDs: A red LED on the hideaway module and a blue LED on the wired remote illuminate when the unit is on. An external LED is also included, useful when flush mounting the remote (without the surface mount housing).

Connections/Controls:

  • Power: included 4-pin contains constant power (should be fused at 1-amp), ground, remote turn-on input (to turn the Punch EQ on), and remote turn-on output (to turn on an amp)
  • Signal Input: included harness has one pair of female stereo RCA jacks; when using a speaker level input the RCAs can be cut off
  • Signal Output: one pair of female stereo RCA jacks
  • Wired Remote: RJ-45 jack used with the included wired remote and cable
  • Level: rotary control to match the incoming source

Wired Remote Installation: The universal Punch EQ includes cables and mounting hardware for installing the wired remote with several options:

  • Surface Mounting: from the factory, the wired remote comes installed in its surface mount housing; a metal mounting bracket and two mounting screws are included and the housing can be suspended below, or mounted above a flat surface
  • Flush Mounting: the surface mount housing can be disassembled and just the remote mounted to a 9/32" hole in a dash or console panel; the unit's rotary knob extends approximately 1/2" from the dash and the mounting depth is approximately 2-5/8" (including the cable)

Dimensions:

  • Hideaway Module:
    • Width: 4-3/4"
    • Height: 1-1/8"
    • Depth: 3-3/16" (4-7/8" including wiring)
  • Wired Remote:
    • Width: 1-7/16"
    • Height: 1-1/8" (1-1/4" including mounting bracket)
    • Depth: 1-5/8" (3-1/8" including knob and wiring)

Specifications:

  • Punch EQ Settings: 0-18 dB at 45 Hz and 0-14 dB at 12.5 kHz (both adjusted simultaneously using the rotary knob on the wired remote)
  • Maximum Output Level: 10 volts RMS
  • Input Range: 600mV to 10V RMS
  • Frequency response: 20 Hz-20 kHz +/-1 dB
  • THD+N: 0.005%
  • S/N Ratio:
    • 100 dB (CEA 2006)
    • 110 dB (at 10 volt output)
  • Channel Separation: >80 dB
  • Input Impedance: 20 kΩ
  • Output Impedance: 500 Ω

Loading accessories...

Customer Q&A

Q
Crutchfield asked: Why did you buy this?
A
I trust the name and need treble and mid EQ to balance with my Subs. [ D  Nov 02, 2018 ]
A
add sound to new speaker [ William  Nov 08, 2017 ]

5 questions already asked

Q
How do i hook up daul sub amps?
[ Butterbean  Feb 25, 2018 ]
1 answer
A
If you are using this as a high level to low level converter just split the signal with an rca y adapter
[ Alex  Mar 14, 2018 ]
Q
How use the High Level Input?, cut or tap the RCA to line included wire?
[ Coneman  Mar 06, 2016 ]
1 answer
A
Yes. You can cut the RCA ends off the supplied harness and connect the leads you've run from the factory speaker wire taps. I recommend using the Posi Tap connectors for this as you will not have to cut or splice the stock leads: http://www.crutchfield.com/p_669PP605/item.html I hope that helps! My Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=5
[ Ryan  Mar 09, 2016 ]  Staff
Q
Would it be okay to run this for my front and rear channels or would I need to purchase another?
[ Daniel  Jan 17, 2016 ]
2 answers
A
You will need two, it has one input and one output. You could in theory split the output into two outputs but last time I tried that the sound quality seriously suffered!
[ Kyle  Jan 18, 2016 ]
A
I would run more then one for maximum output.
[ Kinsley  Jan 18, 2016 ]
Q
Can this be used in a 2008 pontiac g6 ? I just got a system for the first time and have no idea what happened. But i have a hunch i blew the converter in it now. When doing research i discovered that it was a 400watt capability and my amp is beyond that... like 800.
[ samantha  Mar 03, 2015 ]
1 answer
A
If you purchased the product from Crutchfield, feel free to contact our Tech Support team. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer. You can also post your question in our forums: http://community.crutchfield.com. Or try our online support center: http://crutchfield.custhelp.com/app/answers/list/kw/.
[ Jeff  Mar 03, 2015 ]  Staff
Q
How is the performance and sound quality? What improvement should I expect? Thanks!
[ ANTHONY R  Jun 15, 2014 ]
2 answers
A
How does it convert the low RCA cable input into a high input?
[ RBolling  Sep 17, 2014 ]
A
I love this little thing.... I tried it in my truck with a pioneer head old school fosgate 800a2 ...... Bass sounds tighter with a deeper feel, also I'm driving two kicker cvt 12's which would bottom out at times.... Now with the rfpeq it takes a lot more power before bottoming out. Also I tried it on my Audi q7 which I can't do a before and after comparison but sounds great and there was no cutting of wires to install, and no searching for a remote turn on,,, I connected it directly to the wheel well sub connector and I had my low level and remote for my amp
[ aaron  Jun 15, 2014 ]
SHOW MORESHOW LESS

Loading articles...

TOP