Injection-Molded Woofers: The woofer cones are injection-molded
carbon fiber filled polypropylene. This molding process assures a uniform cone
thickness for superior linearity and clarity. It is also light weight and rigid
for decreased distortion and improved bass response.
Klippel Verified: The Klippel distortion analyzer, a device
that uses a laser and sophisticated software to do large-scale analysis of drivers
in motion, lets Rockford Fosgate optimize the speaker's motor structure, voice
coil alignment, and suspension to yield the best possible performance.
VAST Surround: The Vertical Attach Surround Technique (VAST)
increases a speaker's effective radiating cone area without increasing the size
of the basket.
FlexFit 2 Basket: The FlexFit 2 frame utilizes slots (where
possible) instead of single screw sized holes; allowing slight adjustment of the
speaker when mounted.
Size Classification Note: Some manufacturers, including Rockford
Fosgate, call this size speaker a 6-1/2". Because it requires a larger cutout
than a standard 6-1/2" speaker, Crutchfield has traditionally referred to this
size woofer as a 6-3/4". Please refer to the Crutchfield Vehicle Selector to
confirm fit in your vehicle.
Mounting: The 1" treated cloth dome tweeters have multiple
mounting configurations; choose flush or surface mount. The surface mount housing
can be positioned at two angles, approximately 10° or 30° angle. Depending on the
mount used, the installed dimensions are:
| ||Flush ||Surface 10° ||Surface 30° |
|Mounting Height ||
|Mounting Depth ||0.912" ||Screw Depth ||Screw Depth |
|Frame Diameter ||2.136" ||N/A ||N/A |
|Cutout Diameter ||1.75" ||N/A ||N/A |
|Frame Width ||N/A ||2.128" ||2.128" |
|Frame Depth ||N/A ||2.151" ||2.144" |
Tweeter Level: A switch on the side of each crossover allows
you to adjust the output level of the tweeters to -2 dB, 0 dB, or +2 dB.
Tweeter Axis: Another switch on each crossover adjusts the
tweeter output for on axis or off axis placement.
Bi-amp: The crossovers have discrete inputs for the woofer
and tweeter, along with a bi-amp on/off switch, so each component can be powered
by an individual amplifier channel.
Slope: The crossover slope is 18 dB/octave high pass and 12
dB/octave low pass.
Wiring: The crossover inputs and outputs are set screw
clamps; they will accept bare wire up to 10-gauge.
- Width: 4-5/8"
- Height: 1-3/8"
- Depth: 4-5/8"
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.