About the Rockford Fosgate T1D215
Rockford Fosgate engineered Power Series subs for ultimate high-power, high-volume bass. So whether you're building a system for serious competition or just to satisfy your appetite for great bass, these subs deliver colossal low-frequency reproduction that's as real as it gets.
Radial heat sink plus extended excursion for more bass
The Power Series T1D215 15" subwoofer comes equipped with a radial heat sink that's secured directly to the top of the magnet structure. This special copper heat sink radiates heat away from the voice coils, so they stay cooler for increased efficiency. It also shields the voice coils from stray magnetic energy that can impair performance. Sounds cool, but what does it mean to you? It means you get more power handling and more bass output, and that's a good thing. The sub's hefty cast aluminum frame provides a stable platform for extreme cone excursion, while an extended pole piece and bumped backplate allow the sub to hit deeper lows without "bottoming out."
Crowd-drawing bass beats
This T1 sub features a responsive paper cone that's reinforced with Kevlar® fibers (also used in bulletproof vests) — a hard anodized aluminum dust cap covers and protects the entire cone, showcasing the glossy Rockford Fosgate logo. The result is classic warm bass from a cone that's virtually indestructible. Rockford Fosgate uses a new technique to attach the oversized rubber surround to the cone that increases available cone area up to 25%, so this sub can push more air for even bigger bass.
Fuse-protected impedance selection
Rockford Fosgate's outfits Power Series subs with their unique SWIFT™ terminals, which lets you build exactly the system you want — high-power or multi-sub — without complicated wiring. Just rotate the impedance selection jumper to safely choose between 1 or 4 ohms. The jumper is also fused to protect your sub from accidental overload. If you're thinking about adding another sub down the line, this sub simplifies reconfiguring your system. These subs work equally well in a sealed or ported enclosure, so you can choose the kind of bass you want for your system.
Product highlights:
- 15" subwoofer with with selectable 1- or 4-ohm impedance
- Kevlar® reinforced paper cone with aluminum dust cap
- Santoprene surround
- cast aluminum basket
- radial heat sink cools voice coils for higher power handling and efficiency
- metal grille included
- power range: 150-1000 watts RMS (2000 watts peak power)
- frequency response: 25-500 Hz
- sensitivity: 88 dB
- top-mount depth: 8-1/2"
- sealed box volume: 2.25 cubic feet
- ported box volume: 2.12-4.22 cubic feet
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # T1D215
What's in the box:
Rockford Fosgate T1D215 owner's manual
- 15" Dual 2-ohm voice coil subwoofer
- Grille
- Fused 1-ohm/4-ohm SWIFT jumper (installed)
- Non-Fused 1-ohm/4-ohm jumper
- Twelve 1-5/8" Allen head screws
- 4mm Allen head bit
- Installation/Operation manual (English/ French/ Spanish/ German)
Featured review
Excellent subwoofer that it bang really loud definitely I'll recommend to everyone to get one..
Erik from Brenham Tx
12 reasons to shop with us
#3
Free tech support
for the life of your gear
Here in Virginia,
7 days a week.
Reviews
Customer reviews
Loading reviews...
Rockford Fosgate T1D215 reviews
Average review:
Thanks for submitting your review
Customer photos
More details on the Rockford Fosgate T1D215
Features & specs
| Size | 15 -inch | |
| Impedance | Other | |
| Cone Material | Kevlar reinforced paper | |
| Surround Material | Santoprene | |
| Ideal Sealed Box Volume (cubic feet) | 2.25 | |
| Ideal Ported Box Volume (cubic feet) | 2.66 | |
| Port diameter (inches) | 4 | |
| Port length (inches) | 10 | |
| Free-Air | No | |
| Dual Voice Coil | Yes | |
| Sensitivity |
88 dB at 1 watt | |
| Frequency Response | 25 - 500 Hz | |
| Max RMS Power Handling | 1000 | |
| Peak Power Handling (Watts) | 2000 | |
| Top Mount Depth (inches) | 8 1/2 | |
| Bottom Mount Depth (inches) | 9 | |
| Cutout Diameter or Length (inches) | 13 15/16 | |
| Vas (liters) | 102 | |
| Fs (Hz) | 26.3 | |
| Qts | 0.43 | |
| Xmax (millimeters) | 16.4 | |
| Parts Warranty | 1 Year | |
| Labor Warranty | 1 Year | |
Product Research
Features
Enclosure Compatibility
Features
Dual 2-ohm Voice Coils: The Rockford Fosgate T1D215 subwoofer features dual 2-ohm voice coils and a jumper to easily wire them in series or parallel; the voice coils cannot be easily wired separately.
SWIFT Terminal: Rockford's proprietary SWIFT Terminal (Selectable Woofer Impedance Fused Termination) offers a simple and convenient method of selecting the impedance presented by the dual voice coil subwoofer. The impedance jumper also provides fused protection from severe overload conditions. With the jumper in the 1-ohm position the voice coils are wired in parallel; with the jumper in the 4-ohm position the voice coils are wired in series. A second, non-fused jumper is also included with the sub.
Woofer: The Kevlar fiber reinforced paper cone has a hard anodized aluminum dust cap of equivalent size; the result is a lightweight and extremely strong cone, reducing piston flex and cone distortion.
VAST Surround: The Vertical Attach Surround Technique (VAST) increases a speaker's effective radiating cone area without increasing the size of the basket. The surround is made of durable Santoprene.
Voice Coil Former: Aluminum voice coil formers offer superior heat dissipation over other commonly used materials. The hard-anodized finish increases the former strength. These two factors combine to improve the overall power handling characteristics of the subwoofer.
Cast Aluminum Basket: The basket is a die-cast aluminum design to add rigidity and eliminate multiple acoustic resonances. Additionally, the large aluminum mass helps reduce voice coil former temperature and increase power handling.
Motor Assembly: The double stacked magnet assembly, extended pole, and bumped back plate are used to create a powerful linear motor with increased excursion capability for superior bass output.
Terminals: The proprietary spring terminals will accept bare wire up to 8-gauge.
Grille: A metal grille is included to protect the subwoofer and add a finished look. If the sub is bottom mounted and the back is visible, the grille can be disassembled and just the trim ring can be installed to cover the mounting screws.
CEA-2031 Compliant: Power handling on the T1D215 subwoofer conforms to CEA-2031 industry standards. This means the subwoofer has the capacity to handle power under continuous demand, not instantaneous power handling, that over time, can damage voice coils.
FlexFit Basket: The Flex Fit frame utilizes slots (where possible) instead of single screw sized holes; allowing slight adjustment of the speaker when mounted.
Enclosure Compatibility
Ported Box: Two ported enclosures are recommended:
- Optimum: internal volume of 2.66 cubic feet using one 4" diameter x 10" long port; this yields a tuning frequency of 32 Hz
- High Output: internal volume of 4.22 cubic feet using a 3" x 16-1/2" x 22-1/2" slot loaded port; this yields a tuning frequency of 38 Hz
Sealed Box: When using a sealed enclosure, Rockford recommends an internal volume of 2.25 cubic feet. Sealed enclosures provide the most control over a woofer, will handle a lot of power, and provide accurate sonic reproduction, making them suitable to all types of music.
Loading accessories...
Customer Q&A
Loading articles...
