Contact us
Close contact box

Rockford Fosgate Power T1D410

10" dual 4-ohm voice coil component subwoofer

Item # 575T1D410

Rockford Fosgate engineered Power Series subs for ultimate high-power, high-volume bass.

Rockford Fosgate engineered Power Series subs for ultimate high-power, high-volume bass.

Need help?
Contact our Virginia-based experts.

Ships free

In stock
$429.99 each

Other options

Add to wishlist

About the Rockford Fosgate Power T1D410

Crowd-drawing bass beats

Rockford Fosgate engineered Power Series subs for ultimate high-power, high-volume bass. The Power Series T1D410 10" subwoofer features a responsive paper cone that's reinforced with the same Kevlar® fibers used in bulletproof vests — a hard anodized aluminum dust cap covers and protects the entire cone, showcasing the glossy Rockford Fosgate logo. The result? You get classic warm bass from a cone that's virtually indestructible.

Crowd-drawing bass beats

Rockford Fosgate engineered Power Series subs for ultimate high-power, high-volume bass. The Power Series T1D410 10" subwoofer features a responsive paper cone that's reinforced with the same Kevlar® fibers used in bulletproof vests — a hard anodized aluminum dust cap covers and protects the entire cone, showcasing the glossy Rockford Fosgate logo. The result? You get classic warm bass from a cone that's virtually indestructible.

More cone area = more bass

Rockford Fosgate uses their patent-pending VAST technique to attach the oversized rubber surround to the cone, increasing available cone area up to 25% so this sub can push more air for even bigger bass.

Extended excursion

A hefty cast aluminum frame provides a stable platform for extreme cone excursion, while an extended pole piece and bumped backplate allow the sub to hit deeper lows without "bottoming out." Special venting in the frame keeps the aluminum voice coils cool through heavy use for consistent bass performance over time.

Fuse-protected impedance selection

Rockford Fosgate outfits Power Series subs with their unique SWIFT™ terminals, which lets you build exactly the system you want — high-power or multi-sub — without complicated wiring. Just rotate the impedance selection jumper to safely choose between 2 or 8 ohms. If you're thinking about adding another sub down the line, this impedance selector simplifies reconfiguring your system.

The jumper is also fused to protect your sub from accidental overload. These subs work equally well in a sealed or ported enclosure, so you can choose the kind of bass you want for your system.

To drive this single subwoofer, we recommend a mono amplifier rated between 450 and 900 watts RMS at 2 ohms. For more information, please refer to our article on How to Match Subwoofers and Amplifiers.

READ LESS

Product highlights:

  • 10" dual voice coil subwoofer with selectable 2- or 8-ohm impedance
  • Kevlar® reinforced paper cone with aluminum dust cap
  • rubber surround
  • cast aluminum basket
  • metal grille included
  • power handling: 600 watts RMS (1200 watts peak power)
  • sensitivity: 83 dB
  • top-mount depth: 6-3/8"
  • warranty: 1 year
  • Our 60-day money-back guarantee
  • MFR # T1D410

What's in the box:

  • 10" Dual 4-ohm voice coil subwoofer
  • Grille
  • Fused 2-ohm/8-ohm SWIFT jumper (installed)
  • Non-fused 2-ohm/8-ohm SWIFT jumper (not installed)
  • Twelve 1-5/8" Allen head screws
  • 4mm Allen head bit
  • Installation/Operation manual (English/ French/ Spanish/ German)

Customer reviews

Loading reviews...

Rockford Fosgate Power T1D410 reviews

Average review:

2 reviews

Filter by rating

Customer photos

Sort reviews

Sort by:
Items per page:
View page:

Legendary Fosgate

Gerard from Anchorage on 4/22/2019

2015 Chevrolet Impala

Verified customer (What's this?)
Verified employee purchase (What's this?)

Just the icing on the cake for my Impala build. Hits deep notes and plays beautifully at all levels

Pros: Sounds awesome in the ported enclosure. Hits hard for a 10 sounds like LSU marching band in my trunk

Cons:

Crutchfield response on
Customer review photo Customer review photo Customer review photo

0 of 0 found this helpful

Rockford Fosgate Power T1D410

Jonathan from Hawesville, KY on 2/28/2019

Verified customer (What's this?)
Verified employee purchase (What's this?)

Excellent sound quality! Very happy with the RF-T1 subwoofer and customer service!

Pros:

Cons:

Crutchfield response on

0 of 0 found this helpful

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

<< >>

More details on the Rockford Fosgate Power T1D410

Pat M.

Product Research

Features
Enclosure Compatibility

Features

Dual 4Ω Voice Coils: The Rockford Fosgate T1D410 subwoofer features dual 4Ω voice coils and a jumper to easily wire them in series or parallel, presenting either a 2Ω or 8Ω load; the voice coils cannot be easily wired separately.

SWIFT Terminal: Rockford's proprietary SWIFT Terminal (Selectable Woofer Impedance Fused Termination) offers a simple and convenient method of setting the impedance presented by the dual voice coil subwoofer. The impedance jumper also provides fused protection from severe overload conditions. With the jumper in the 2Ω position the voice coils are wired in parallel; with the jumper in the 8Ω position the voice coils are wired in series.

Note: A second jumper is included with the subwoofer, described in the manual as non-fused. Visually, however, this jumper also appears to be fused, but at a higher threshold than the factory installed jumper (possibly high enough to make it effectively non-fused).

Woofer: The Kevlar fiber reinforced paper cone has a hard anodized aluminum dust cap of equivalent size; the result is a lightweight and extremely strong cone, reducing piston flex and cone distortion.

VAST Surround: The Vertical Attach Surround Technique (VAST) increases a speaker's effective radiating cone area without increasing the size of the basket.

Voice Coil Former: Aluminum voice coil formers offer superior heat dissipation over other commonly used materials. The hard-anodized finish increases the former strength. These two factors combine to improve the overall power handling characteristics of the subwoofer.

Cast Aluminum Basket: The basket is a die-cast aluminum design to add rigidity and eliminate multiple acoustic resonances. Additionally, the large aluminum mass helps reduce voice coil former temperature and increase power handling.

Terminals: The proprietary spring terminals will accept bare wire up to 8-gauge.

Grille: A metal grille is included to protect the subwoofer and add a finished look. If the sub is bottom mounted and the back is visible, the grille can be disassembled and just the trim ring can be installed to cover the mounting screws.

CEA-2031 Compliant: Power handling on the T1D410 subwoofer conforms to CEA-2031 industry standards. This means the subwoofer has the capacity to handle its rated power under continuous demand, not just for an instant.

Klippel Verified: The Klippel distortion analyzer, a device that uses a laser and sophisticated software to do large-scale analysis of drivers in motion, lets Rockford Fosgate optimize the subwoofer's motor structure, voice coil alignment, and suspension to yield the best possible performance.

Inductive Damping Heat Sink: The Inductive Damping Heat Sink (IDSH) secures directly to the top of the magnet structure to improve system efficiency by reducing both distortion and back EMF (Electo-Magnetic force). It also radiates heat to reduce the voice coil temperature.

FlexFit Basket: The Flex Fit frame utilizes slots (where possible) instead of single screw sized holes; allowing slight adjustment of the speaker when mounted.

Enclosure Compatibility

Sealed Box: When using a sealed enclosure, Rockford recommends an internal volume of 0.75 cubic feet. Sealed enclosures provide the most control over a woofer, will handle a lot of power, and provide accurate sonic reproduction, making them suitable to all types of music.

Ported Box: Two ported enclosures are recommend:

  • Optimum: internal volume of 1.5 cubic feet using one 4" diameter x 11" long port; this yields a tuning frequency of 40 Hz and a -3 dB point of 32 Hz
  • High Output: internal volume of 2.04 cubic feet using a 2" x 12" x 25-1/2" slot port; this yields a tuning frequency of 38 Hz

Loading accessories...

Customer Q&A

Q
Crutchfield asked: Why did you buy this?
A
The best [ JAMES E  Sep 14, 2017 ]
A
ive used rockford fosgate for over 20 years , i will never buy a different brand of sub [ david  Mar 09, 2016 ]

2 questions already asked

Q
Rockford Fosgate Power T1D410; What are some amp recommendations for this sub?
[ chris  Jun 20, 2019 ]
1 answer
A
Thanks for your question. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system.
[ Krissy  Jun 28, 2019 ]  Staff
Q
Will these fit under rear seats of 2014 f-150?
[ Eddy  Oct 01, 2016 ]
1 answer
A
This will depend largely on the size of the box you're installing as well as the body style and version of your 2014 F-150. For more details, please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you more specific installation information. I hope that helps!
[ Larry  Oct 05, 2016 ]  Staff

Loading articles...

TOP