Rockford Fosgate RFYXZ-PMXDK Dash Kit
Install the PMX-0 or PMX-2 marine receiver in select Yamaha YXZ models
Item # 575YXZPMXD | MFR # RFYXZ-PMXDK
Ask an expert
Our VA-based experts can help.
Our take on the Rockford Fosgate RFYXZ-PMXDK Dash Kit by Crutchfield's Jon Paul
Ready for your receiver
If you're building a killer sound system for your Yamaha YXZ, it all starts with the receiver. This RFYXZ-PMXDK dash kit lets you install a Rockford Fosgate PMX-0 or PMX-2 marine receiver (sold separately), which will get things off to a very impressive start.
Blends right in
The kit is textured and color-matched to your Yamaha's interior, so it'll look like factory equipment. Some drilling is required for the installation, but it's a project that any DIY-er can handle. The kit mounts to the factory storage pocket and includes everything you need for a clean, hassle-free installation for either receiver.
- custom dash kit for select Yamaha YXZ models
- designed to hold a Rockford Fosgate PMX-0 or PMX-2 marine receiver
- tough enough for outdoor use
- hassle-free installation
- warranty: 2 years
- Our 60-day money-back guarantee
What's in the Box:
- Dash bezel
- Power harness
- PMX-2 harness
- PMX-0 harness (in-line 15A fuse)
- PMX-2 housing
- PMX-0 housing
- Metal bracket
- Rubber grommet
- 8 Hex-head screws
- 4 Hex-nuts
- 4 Bullet-connectors
- Clear plastic drill guide
- Installation/Operation Booklet
Why Shop With Us?12 Reasons.
Compatibility: The RFYXZ-PMXDK dash kit is designed to facilitate the addition of the Rockford Fosgate PMX-3, PMX-2, or PMX-0 digital marine source unit (sold separately) into select select Yamaha YXZ model ATVs. The dash kit includes a main dash bezel and mounting hardware, plus two radio housings and two wiring harness (you will only use the housing and wiring harness for your specific source unit).
Yamaha Compatibility: The RFYXZ-PMXDK dash kit is specifically designed for 2016-up Yamaha YXZ model ATVs. The dash kit mounts to the factory storage pocket. Its texture and color matches factory dash & interior.
- Requires drilling a 2" access hole in center pocket.
- The included harness for the PMX-2 and PMX-3 is designed to plug directly into the factory wiring harness. The included PMX-0 harness will require a hardwire connection to the factory harness and battery.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.