About the Logitech® Harmony® Home Hub Extender
The Logitech Harmony Home Hub Extender works with your Harmony Home Hub or Ultimate Hub (available separately) to give you control over ZigBee, Z-Wave and Z-Wave Plus home automation devices. Use your compatible Harmony remote or Harmony smartphone app to control compatible lights, thermostats, plugs, door locks, and more.
What's in the box:
- Hub Extender
- "Important Safety" sheet
Logitech® Harmony® Home Hub Extender reviews
I own a Harmony Elite, which is working fantastically. Thought I would try the EXTENDER, to be able to turn lights on and off, etc. I bought a couple of GE switches that were named by the manufacturer to be compatible and it works great, as expected. If you want electronic door locks, remote lights, etc, this is your ticket.
0 of 1 found this helpful
More details on the Logitech® Harmony® Home Hub Extender
Harmony Home Hub Extender: The Harmony Home Hub Extender integrates ZigBee, Z-Wave, and Z-Wave Plus compatible devices with your existing Harmony Hub (596HMYNHUB, sold separately). Control lights, locks, sensors, garage doors and other devices operating through ZigBee or Z-Wave. You can include these devices in your programmed schedules and activities for enhanced home control. Or, you can use Harmony's Ultimate or Elite Home Remote (596ULTMHMW / 596ELITE, sold separately) or the Harmony Control App on your Apple iOS or Android device to control devices connected to an existing smart home control platform from Nexia, Vera Control (formerly Mi Casa Verde,) or ADT. Now your Harmony Hub system can control more home automation devices whether from inside or from outside your home.
Note: Harmony remotes work with over 270,000 devices with new devices being added every month
Installation & Setup: The Harmony Home Hub Extender is designed to sit directly beneath the Harmony Hub. Place the Harmony Hub on top of the Home Hub Extender so the LED lights both face forward. Magnets will help guide the two products into place. Connect the short USB cable from the extender into the back of the hub. Lastly, connect the power cable into the Home Hub Extender and plug the adapter into the wall. Both LED lights should turn on. You'll then use the Harmony Control App on your Apple iOS or Android device or the MyHarmony desktop software to setup the Harmony Hub & Extender system.
Q Crutchfield asked: Why did you buy this?