Contact us
Close contact box

Viper RF Kit Model 9756V

2-way remote control with 1-mile range for Directed remote start systems

Item # 6079756V

You can start your vehicle from up to a mile away with Viper's Model 9756V RF Kit connected to your Directed ...

You can start your vehicle from up to a mile away with Viper's Model 9756V RF Kit connected to your Directed ...

Need help?
Contact our Virginia-based experts.
Discontinued item
5 questions - 5 answers

Item # 6079756V

About the Viper RF Kit Model 9756V

Extends the range and adds functions for your Directed remote start systems

You can start your vehicle from up to a mile away with Viper's Model 9756V RF Kit connected to your Directed 4X10 or 5X10 remote start system. The remote can also lock and unlock your car, pop open the trunk, and even start the defogger if you want. Lost your car in the parking lot? Use the remote to trigger a long horn honk or siren chirp while the parking lights flash for ten seconds so you can locate your car. Four auxiliary channels let you add more optional sensors and actuators to your system.

Extends the range and adds functions for your Directed remote start systems

You can start your vehicle from up to a mile away with Viper's Model 9756V RF Kit connected to your Directed 4X10 or 5X10 remote start system. The remote can also lock and unlock your car, pop open the trunk, and even start the defogger if you want. Lost your car in the parking lot? Use the remote to trigger a long horn honk or siren chirp while the parking lights flash for ten seconds so you can locate your car. Four auxiliary channels let you add more optional sensors and actuators to your system.

Two remotes

The 9756V system comes with a 5-button 1-way remote and a 5-button 2-way LCD remote. You'll see your commands confirmed on the 2-way remote with lights and audible beeping, so you'll know your vehicle's status. If you're using the 5X10 security system, any situation that triggers the alarm will be indicated on the 2-way remote.

READ LESS

Product highlights:

  • RF remote control for Directed digital remote start systems
  • one 5-button 2-way LCD remote
  • one 5-button 1-way remote
  • windshield-mount control center with blue status LED and valet switch
  • range: up to 1 mile
  • works with Directed 4X10 and 5X10 modules
  • wiring harness included
  • 4 auxiliary channels
  • warranty: 1 year
  • Our 60-day money-back guarantee
  • MFR # 9756V

What's in the box:

  • 7756V 5-button 2-way LCD remote transmitter
  • 7656V 5-button 1-way remote transmitter
  • CR2032 battery (installed in 7656V remote)
  • 681ST Control Center/Valet Switch with blue LED and double-sided adhesive
  • 10' Flat cable with two 6-pin connectors
  • 5" Adapter cable (6-pin to 4-pin connectors)
  • 37" USB charging cable (Type A USB on one end and Micro USB on other end)
  • Installation booklet

Customer reviews

We don't have any reviews, yet.
Submit a review and then enter to win a $350 rewards card.
Be the first to review this product

Loading reviews...

Thanks for submitting your review

Filter by rating

Customer photos

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

<< >>

More details on the Viper RF Kit Model 9756V

Russ B.

Product Research

Features

Overview: The 9756V 2-way Remote System comes with a 5-button, 2-way LCD remote transmitter (7756V), a 5-button, 1-way remote transmitter (7656V), and a low-profile control center/valet button/LED. The system can be integrated into an existing Viper security system, remote start, or keyless entry system. The remotes have a range of up to 1 mile.

2-way Operation: The 9756V is a 2-way remote system, which means that commands can travel wirelessly from the remote transmitter to the Control Center, and ultimately to the security/remote start system's control module. In a 2-way system, confirmation responses are also received by the LCD remote, indicated by LCD icons, vibrations, and beeps. The 1-way remote does not confirm commands from the Control Center.

5-Button Operation: Both transmitters have 5 buttons with the following configuration (depending upon the capabilities of your system):

  • Arm/Lock: Arms your security system, or locks your car with the push of a button.
  • Disarm/Unlock: Disarms your security system, or unlocks your car with the push of a button.
  • Remote Start: Starts your car's engine and warms up your car.
  • Auxiliary: Opens your trunk and controls other optional functions.
  • Function: Accesses dozens of functions.

Remote Batteries: The 7756V LCD remote is powered by a built-in rechargeable battery. The supplied USB charging cable allows you to charge the remote from a USB charging port or from your computer. The 7656V remote is powered by user-replaceable CR2032 battery.

Antenna/Receiver: Included with the 9756V 2-way LCD Remote System is a low-profile Control Center with a valet button and a bright blue status LED. Typically, the Control Center is mounted high and centered on the windshield. You can mount it either vertically or horizontally. A 10' cable is included for wiring the Control Center to the control module of the security/remote start system. An adapter cable is also included for control modules with 4-pin control center ports. Dimensions: W: 1.228", H: 2.561", D: 0.383"

Loading accessories...

Customer Q&A

5 questions already asked

Q
You guys have the option of send the alarm system all ready wired?
[ javier  Oct 19, 2017 ]
1 answer
A
No. You'll have to connect quite a few wires to your vehicle's electrical system. We do provide lifetime tech support with every purchase so, you can always call with any problems or questions: https://www.crutchfield.com/Support/TechSupport.aspx
[ Ryan  Oct 21, 2017 ]  Staff
Q
Will this work for a 2006 Toyota Highlander?
[ Jean  Dec 08, 2016 ]
1 answer
A
For additional details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will integrate and what you will need for an installation in your vehicle.
[ Kenny  Dec 09, 2016 ]  Staff
Q
My Viper remote is flashing orange and green lights. I changed the battery and it is still doing it. What is going on and how do I fix it?
[ kathy se  Aug 06, 2016 ]
1 answer
A
If you purchased the product from Crutchfield, feel free to contact our Tech Support team. They can walk you through the settings on the product and see if there may be a fix. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer. You can also post your question in our forums: http://community.crutchfield.com. Or try our online support center: http://crutchfield.custhelp.com/app/answers/list/kw/.
[ Kenny  Aug 06, 2016 ]  Staff
Q
Would this work for my 1990 Chevy 1500 454 ss?
[ Shanner  Aug 06, 2016 ]
1 answer
A
For additional details on compatibility or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will work and what you will need for an installation in your vehicle.
[ Kenny  Aug 06, 2016 ]  Staff
Q
What would be needed to install this on a 2015 Subaru outback with push button start and keyless entry? It already has factory remote starter but distance is 75ft with a clear shot at car. Thanks Rick
[ Rick  Mar 02, 2016 ]
1 answer
A
You will want to contact an Advisor by phone (1-800-324-9695) or online chat to discuss compatibility with your factory system. They will be able to pull up your vehicle and see if this will integrate. If it does not, then they will also be able to discuss other options with you.
[ Kenny  Mar 03, 2016 ]  Staff
SHOW MORESHOW LESS

Loading articles...

TOP