About the Kenwood KAC-9106D
Kenwood makes tough, rugged amplifiers that bring you superior sound quality along with reliable performance. When you power your subwoofer with Kenwood's Performance Series KAC-9106D amplifier, you'll hear all the great tonal color, impact, and detail in your music's bass, from the hard punch of the rhythm section to the soft thump of a quiet kick drum.
The KAC-9106D mono amp puts out up to 1,000 watts RMS to your subwoofer. Onboard low-pass and subsonic filters let you adjust the signal so you'll get the best sound possible from your subwoofer/box combo. You can dial in up to 18 dB of bass boost if you want to really fatten up the sound.
This versatile amp features speaker-level inputs and signal sensing turn-on, so you can put this amp to work in just about any kind of system. Aluminum cover plates cover and protect the amp's connections and controls, giving your installation a neat, professional look.
- mono subwoofer amplifier
- 500 watts RMS x 1 at 4 ohms (1,000 watts x 1 at 2 ohms)
- CEA-2006 compliant
- Class D amp design
- variable low-pass filter (50-200 Hz at 24 dB per octave)
- bass boost (0-18 dB at 40 Hz )
- subsonic filter (20-50 Hz, 18 dB/octave )
- speaker-level inputs with signal sensing turn-on
- preamp inputs and outputs
- fuse rating: 40A x 3
- 4-gauge power and ground leads recommended wiring and hardware not included with amplifier
- 13-3/16"W x 2-1/4"H x 7-5/8"D
- warranty: 90 days
- Our 60-day money-back guarantee
- MFR # KAC-9106D
What's in the box:
- Refurbished Mono subwoofer amplifier
- Three 40 amp ATO fuses (installed)
- 2 Terminal covers (installed)
- 7" Speaker-level input harness
- 2.5mm Allen wrench
- Four 5/8" Self-tapping screws
- Instruction manual (English/ French/ Spanish)
- Warranty information
Kenwood KAC-9106D reviews
Thanks for submitting your review
More details on the Kenwood KAC-9106D
Features & specs
|RMS Power Output (Watts x Channels)||
500 x 1 |
|Peak Power Output (Watts x Channels)||2000 x 1|
|Power at 2 Ohms (Watts x Channels)||1000 x 1|
|Bridged Power (Watts x Channels)||N/A|
|Minimum Impedance Bridged||N/A|
|Minimum Impedance Unbridged||2|
|Best Frequency Response||20-200 Hz|
|THD at Rated RMS Power||1%|
|Signal to Noise Ratio||76 dB|
|Low-Pass Crossover Frequency||50-200 Hz|
|Low-Pass Slope (dB/octave)||24 dB/octave|
|High-Pass Crossover Frequency||N/A|
|High-Pass Slope (dB/octave)||N/A|
|Bass Boost||0-18 dB|
|Bass Boost Frequency||40 Hz|
|Speaker Level Inputs||---|
|Preamp Outputs||1 pair|
|Parts Warranty||90 Days|
|Labor Warranty||90 Days|
CEA-2006 Compliant: CEA-2006 is a system of testing and measurement for mobile audio amplifiers. This voluntary standard advocates a uniform method for measuring an amplifier's RMS power output and signal-to-noise ratio. The criteria for measuring power uses a DC input voltage of 14.4 volts and the RMS power output is measured into a 4Ω load, with 1% or less Total Harmonic Distortion plus noise (THD+N), and over a frequency range of 20 Hz to 20 kHz (for full range amplifiers). Signal-to-Noise ratio is measured in weighted absolute decibels (dBA) at a reference of 1 watt into 4Ω. CEA-2006 standards allow consumers to compare car amplifiers and receivers under the same conditions (apples to apples). Using CEA-2006 criteria, the Kenwood KAC-9106D is rated at 500 watts RMS x 1 channel with a 76 dBA signal to noise ratio. The signal to noise ratio at the rated power output (not CEA-2006 conditions) is 100 dB.
2-Ohm Stable: The amplifier can also support a 2-ohm load; the 2-ohm power output is 1,000 watts RMS x 1 channel.
Cast Aluminum Heat Sink: The KAC-9106D utilizes a cast aluminum heat sink design to ensure the amplifier stays cool.
Protection circuitry: The amplifier features protection circuits that will turn the amp off in case of the following events:
- speaker wire short-circuits
- speaker output contacts ground
- unit malfunctions and DC is sent to speaker output
- the amp overheats
Power Indicator: When the amplifier is turned on the Power indicator (on top of the amp) lights up. This indicator turns off with the amplifier, and will turn off if the amplifier goes into protect mode.
Auto Turn-on: When using a speaker level input, the amp will turn on automatically when it senses the input signal.
Gain: To accommodate the varying range of signal levels from today's factory and aftermarket radios, the KAC-9106D features an adjustable gain control; 0.2-5.0 volts line level (RCA) and 4.0-12.0 volts speaker level.
Crossover: The built-in 24 dB/octave low-pass filter has a continuously variable crossover point; 50Hz to 200Hz. Because this is a subwoofer amp, the crossover is always engaged.
Infrasonic Filter: The 24 dB/octave Infrasonic Filter removes ultra-low frequencies that cannot be reproduced by most subwoofers. These frequencies do not become sound, but unnecessary oscillations which affect sound by causing distortion. These frequencies also waste amplifier power and can cause damage to speakers. The filter's crossover point is continuously variable from 20 Hz to 50 Hz.
Bass Boost: The bass boost is adjustable from 0-18dB at 40Hz.
Power Connections: The power and ground connections are 0.55" wide screw terminals. The remote turn-on screw terminal is 0.335" wide. A Phillips-head or flat blade screw driver (not supplied) is required to tighten/loosen the terminals. Spade connectors are recommended. The manual lists a minimum of 10 gauge wire for power and ground, but given the 120 amp fuse value and the current consumption specification of 65 amps, we recommend a 4 gauge wiring kit.
Speaker Outputs: There are two pair of 0.335" wide screw terminal speaker outputs; they are internally wired in parallel, making it easy to connect two subwoofers. A Phillips-head or flat blade screw driver (not supplied) is required to tighten/loosen the terminals. Spade connectors are also recommended for the speaker wires.
Line Level Input: The line input is a pair of stereo RCA jacks.
Line Level Output: The amplifier has a pair of RCA line level outputs for feeding another amplifier; it is the same signal that is input through the RCA line inputs. The amplifier's crossovers have no effect on the line level output signal.
Speaker Level Input: A wiring harness is included for the speaker level input.
Fuses: The amplifier uses three 40-amp ATO blade-type fuses.
Warranty Note: This refurbished Kenwood product carries a 90-day warranty when purchased from Crutchfield. Kenwood offers Crutchfield customers an extra 60 days extended warranty beyond the 30-day Kenwood Limited Warranty for Refurbished Product that comes in the box.
2 questions already asked