About the Marantz MM7055
Five channels of home theater horsepower
Five channels of home theater horsepower
Even with the advent of 7.2- and 9.2-channel surround sound systems, most home theater lovers still opt for tried-and-true 5.1-channel sound. Recognizing this reality, Marantz built this 5-channel power plant as the primary companion to its AV7005 preamp/processor. You won't have to buy more amp channels than you need, but you can easily add one or more MM7025 2 x 140-watt amplifiers to your setup for more surround channels or multi-room audio.
Behind the MM7055's elegant facade lies a muscular, yet refined current-feedback amplifier design that excels at reproducing both fine musical detail and hair-raising transient peaks.
The MM7055 is comfortable driving high-performance speakers. If your preamp or A/V processor has XLR outputs, you can connect to this amp's XLR inputs and enjoy the superior sound quality they provide.
- 5-channel power amplifier
- 140 watts per channel into 8 ohms (20-20,000 Hz) at 0.08% THD, with 2 channels driven
- frequency response: 8-100,000 Hz (±3 dB)
- signal-to-noise ratio: 105 dB
- one RCA and one XLR input for each channel
- Discrete Current Feedback circuit for accurate, natural sound at all volume levels
- DC trigger input/output
- IR flasher input
- massive power supply for high current and low noise
- gold-plated binding post speaker terminals
- detachable power cord
- weight: 34.6 lbs.
- 17-3/8"W x 7-1/4"H x 16-1/4"D
- warranty: 3 years
- Our 60-day money-back guarantee
- MFR # MM7055
What's in the box:
- 5-Channel power amplifier
- 68" AC power cord
- 44" Remote control cable (single RCA on both ends)
- User guide (English/ French/ Spanish)
- USA Warranty information
- Canadian Warranty information
Scratch & Dent items may be missing non-essential accessories. In some cases the manufacturer's accessories have been replaced with generic equivalents.
Marantz MM7055 reviews
Thanks for submitting your review
More details on the Marantz MM7055
Features & specs
|Number of Channels||5|
|Power Output per Channel (8 ohms)||140|
|Power Output per Channel (6 ohms)||170|
|Power Output per Channel (4 ohms)||---|
|Bridged Power per Channel||N/A|
|Parts Warranty||3 Years|
|Labor Warranty||3 Years|
|Inputs & Outputs|
|Number of Inputs||5|
Current Feedback: The MM7055 is equipped with a current feedback circuit and uses the same complimentary push-pull circuit as the far more expensive SM-11S1 power amp, providing minimal phase shift and excellent detail resolution. The current/voltage conversion section has a Wilson current mirror circuit to improve circuit stability and high-speed processing.
Instant Power Supply: The final stage of the power amp uses the same LAPT (high efficiency power transistor) as the SM-11S1, offering instant power supply capability. The power section has a large transformer and Marantz original 33,000 μF / 71 V x 2 block condensers to provide a powerful, presence filled sound.
Heat Dissipation: The chimney-shaped heat sink efficiently processes the heat emitted from the amp and a quiet cooling fan removes the heat from the chassis. A high-sensitivity temperature sensor IC is used to control the cooling fan's rotation speed to match the amount of heat generated by the amp.
Auto Standby: With the Auto Standby Mode is turned on this unit will enter standby mode after approximately 30 minutes (continuous) with no input signal.
Speaker Outputs: The five speaker output terminals are binding posts; they are not 5-way posts, but will accept single banana plugs, pin connectors, and bare wire. A plastic collar prevents their use with spade lugs and they're too far apart for dual banana plugs.
Inputs: Each channel has an RCA (unbalanced) and XLR (balanced) input. Separate switches for each channel specifies which is engaged.
Display: A blue indicator on the front panel display and a blue ring around the display light when the power is on; the blue ring around the display can be turned off if you prefer. Separate red indicators on the display light when the protection circuit or Auto Standby feature is engaged.
Remote Power Control: This unit is equipped with a remote power control function; when a compatible Marantz preamp is connected, this unit's power can be switched on and off simultaneously with the preamp. The RCA Remote Control input is connected to the preamp and the Remote Control output can be connected to other compatible Marantz components; CD player, DVD player, Tuner, etc.
Flasher Input: The IR flasher input is useful with universal remote controls; power and mute remote codes are available for the MM7055.
DC Control: The 3.5mm mini-jack input allows the MM7055's power to be controlled by another device (5-15 V). The DC Control output allows the MM7055 to control the power of another compatible device (12 V/44 mA).
- Power: (20 Hz-20 kHz, 0.08% THD, two
channels driven simultaneously)
- 8 Ω: 140 watts x 5
- 6Ω: 170 watts x 5
- Input Sensitivity:
- RCA: 1.2 V/22 kΩ
- XLR: 2.4 V/30 kΩ
- Signal to Noise Ratio: 105 dB
- Power Consumption: 660 watts
- Standby Power: 0.2 watts
- Weight: 34.6 pounds
Q Crutchfield asked: Why did you buy this?
14 questions already asked