Select Increments Pillar-Pods PP0718-IA

Features

Installation: Pillar-Pods mount on the dash, over the factory tweeter housings or grilles. Mounting hardware is included (four self-tapping screws with integrated washers and gaskets). The pods are mounted to the plastic A-Pillar covers using these self-tapping screws.

Applications: The pods are compatible with select 2007 to 2018 JK series Jeep Wrangler and Wrangler Unlimited models with the factory Infinity or Alpine premium system. Please enter your vehicle information to confirm fit.

Speakers: The pods are designed for full range (coaxial) 4" speakers. The opening is pre-cut. Neither speakers nor grills are included. One end of each included wiring harness is a T-junction that plugs into the factory wiring at the back of the lower dash speaker enclosures. The other end of each harness has female quick slide terminals to connect the aftermarket speakers (0.187" positive, 0.110" negative).

Tools Required: The following tools may be needed for installation:

• Panel removal tool
• Drill
• 5/16" Hex-Head driver bit
• Ratchet, 7mm and 10mm sockets (2015-2018 models)
• Phillips bit
• Small drill bit (optional)

Note: You may need a rotary tool if you have to make the speaker hole slightly larger to fit your desired speaker.

Specifications

• Box Type: Sealed
• Enclosure Material: Plastic
• Number of Enclosures: 2
• Cutout Shape: Round (pre-cut)
• Cutout Diameter: 3.748"
• Max Frame Diameter: 5.462"
• Dimensions:
  • Width: 6.3"
  • Height: 5.57"
  • Depth: 3.95"