About the Select Increments Stealth-Pod
Select Increments brings you the Stealth-Pod portable subwoofer enclosure, a space-saving way to add some kick to your CJ7, Scrambler or Wrangler. This rugged 1/4"-thick black plastic box mounts on the inside of your tailgate in a hideaway position, so it won't take up much of your limited cargo space. In most cases, you can't remove the enclosure without opening the tailgate or flipping down the back seat. For added security, you can easily disconnect the Stealth-Pod, bring it inside with you, then reinstall it in a flash when you return to your Jeep.
The unloaded Stealth-Pod mounts on the tailgate via bracket hangers which isolate the enclosure and reduce noise-causing vibrations. The sealed enclosure's internal volume measures 0.7 cubic feet, so Type 1 10" component subs work best in the enclosure just install the sub of your choice, then add an amplifier and wiring. Your sub fires down at a slight angle, giving you punchy bass that adds depth to your music while the speaker is protected from the elements.
The package includes all the necessary mounting hardware, including a 10" foam gasket that forms an airtight seal around your speaker. Please enter your vehicle information or call a Sales Advisor at 1-888-955-6000 to find out if this model is compatible with your vehicle. Some slight drilling modification to the tailgate or enclosure may be required to properly mount your subwoofer and install the Stealth-Pod, depending on your Jeep.
- sealed textured plastic subwoofer enclosure
- fits on tailgate of 1976-86 CJ7 / Scrambler and all 1976-up Wrangler models
- holds one 10" subwoofer
- enclosure volume: 0.70 cu. ft.
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # STEALTH-POD
What's in the box:
- Black custom subwoofer enclosure
- One 9.5" diameter round foam gasket
- Eight 1/2" pan head screws
- Five small 3/4" pan head screws
- Four large 3/4" pan head screws
- Two 1" pan head screws
- Four 1/2" flat head screws
- Eight 5/8" flat head screws
- 5 Rubber feet
- Steel reinforced rubber handle
- 2 Handle mounting brackets
- 10" Length of 14 AWG speaker wire
- Dual banana plug
- Two 0.21" Slide connectors
- Round terminal cup
- 2 Mounting brackets
- 2 Mounting bracket hangers
- 2 Hanger gaskets
- 3/32" Drill bit
- Polyester fiber batting
- Installation instructions
Select Increments Stealth-Pod reviews
Thanks for submitting your review
More details on the Select Increments Stealth-Pod
Features & specs
|Number of Boxes||1|
|Number of Speakers Per Box||1|
|Cutout Diameter or Length (inches)||9 1/4|
|Maximum Speaker Depth (inches)||10-13/16|
|Box Volume (cubic feet)||0.7|
|Second Depth (inches)||7-15/16|
|Wood Thickness (inches)||1/4|
|Speaker Wire Connectors||Spring posts|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
Overview: The Stealth-Pod is an enclosure for a 10" subwoofer designed to fit specific jeep vehicles. Please check "Outfit My Car" to confirm compatibility.
Speakers: The Stealth-Pod will accept most 10" subwoofers.
Note: Neither speakers nor wiring is included.
Enclosure: The enclosure is constructed of a sturdy no-flex plastic material with a textured finish. The enclosure color is black.
Security: The Stealth-Pod fires downward, so it isn't obvious to prying eyes.
Stealth-Pod Installation: The Stealth-Pod installs on the tailgate without taking much cargo room. It can also be easily removed to create extra space when needed.
Tools Required: The following tools are needed for installation of your Stealth-Pod:
- Wire strippers
- Wire terminal crimper
- Measuring tape
- Phillips head screw driver(s)
- Small flat head screw driver
- Masking tape
Note: You may need a Roto cut-out tool if you have to make the speaker hole slightly larger to fit your desired speaker.
Box Type: Sealed
Enclosure Material: Plastic
Number of Chambers: 1
Cutout Shape: Round
Cutout Diameter: 9.21"
Max Frame Diameter: 10.832"
Max Driver Depth: 10.756"
Q Crutchfield asked: Why did you buy this?
9 questions already asked