About the Posi-Products™ Wire Connectors
Posi-Tap™ connectors tap into hot leads without cutting them. Just insert wire to be tapped into the large cap and hand tighten into the barrel. The conductor point pierces the tapped wire without compromising its conductive integrity. Insert stripped wires through the small cap, then tighten for an unprecedented multiple hookup using only one connector.
This package contains 6 tap connectors for tapping into 14- to 16-gauge wires for 18- to 24-gauge accessory wiring. Warranty: 60 days.
Posi-Products™ Wire Connectors reviews
Thanks for submitting your review
More details on the Posi-Products™ Wire Connectors
Overview: This connector kit comes with 6 Posi-Tap tap connectors. Posi-Tap connectors allow you to tap into wires without cutting or stripping them. Each connector has a tapered design and a threaded cap on each end. Just insert wire to be tapped into the large cap (this is the Tap end) and hand tighten into the barrel. The conductor point pierces the tapped wire without compromising its conductive integrity. Insert the stripped wire through the small cap (this is the Accessory end), then tighten. An internal conductor runs the length of the Posi-Tap, giving you a solid electrical connection. The Posi-Tap connectors are vibration proof, fully insulated, and reusable.
Note: If multiple wires are inserted into the accessory cap, the stripped wire ends should be twisted together.
- Posi-Tap Connectors: compatible
with 14-16 gauge wire on the Tap end and 18-24 gauge wire on
the Accessory end
- Length: 1.25"
- Maximum Diameter: 0.385"
- Width of Slot in Large Cap (Tap end): 0.1"
- Diameter of Hole in Small Cap (Accessory end): 0.15"
4 questions already asked