About the Posi-Products Wire Connectors
Posi-Products connectors help make your electrical connections fast, easy, and reliable with no crimping, soldering, or messy tape. Just strip your stranded wires, insert them in the caps, and then hand tighten the two caps together the wire ends get locked between opposing cone shapes to create a water-, dirt-, vibration-, and heat-proof housing. You get a strong, low-resistance electrical connection, and you can reuse the connectors, too.
Posi-Tap connectors tap into hot leads without cutting or stripping them. Just insert wire to be tapped into the large cap and hand tighten into the barrel. The conductor point pierces the tapped wire without compromising its conductive integrity. Insert stripped wires through the small cap, then tighten for an unprecedented multiple hookup using only one connector.
This package contains 6 tap connectors for 12- to 18-gauge wires. Warranty: 30 days.
Posi-Products Wire Connectors reviews
Thanks for submitting your review
More details on the Posi-Products Wire Connectors
Overview: This connector kit comes with 6 Posi-Tap tap connectors. Posi-Tap connectors allow you to tap into wires without cutting or stripping them. Each connector has a tapered design and a threaded cap on each end. Just insert wire to be tapped into the large cap (this is the Tap end) and hand tighten into the barrel. The conductor point pierces the tapped wire without compromising its conductive integrity. Insert the stripped wire through the small cap (this is the Accessory end), then tighten. An internal conductor runs the length of the Posi-Tap, giving you a solid electrical connection. The Posi-Tap connectors are vibration proof, fully insulated, and reusable.
Note: If multiple wires are inserted into the accessory cap, the stripped wire ends should be twisted together.
- Posi-Tap Connectors: compatible
with 12-18 gauge wire on both the Tap end and
the Accessory end
- Length: 1.42"
- Maximum Diameter: 0.51"
- Width of Slot in Large Cap (Tap end): 0.11"
- Diameter of Hole in Small Cap (Accessory end): 0.22"