Contact us
Close contact box

Posi-Products™ Wire Connectors

6 mini tap connectors for 20- to 22-gauge wire — tap into wires without cutting them

Item # 669PP641

Posi-Products connectors help make quick, easy, and reliable electrical connections with no crimping, soldering, or...

Read more from Crutchfield writer, Buck P.

Ships today

In Stock
$6.99

About the Posi-Products™ Wire Connectors

Making connections easier

Posi-Products connectors help make quick, easy, and reliable electrical connections with no crimping, soldering, or messy tape. Their Posi-Tap™ mini tap connectors allow you to tap into hot leads without cutting them. Just insert wire to be tapped into the large cap and hand tighten into the barrel. The conductor point pierces the tapped stranded wire without compromising its conductive integrity. Then, you insert one or more stripped wires through the small cap, and hand tighten for a multiple hookup using only one connector.

Making connections easier

Posi-Products connectors help make quick, easy, and reliable electrical connections with no crimping, soldering, or messy tape. Their Posi-Tap™ mini tap connectors allow you to tap into hot leads without cutting them. Just insert wire to be tapped into the large cap and hand tighten into the barrel. The conductor point pierces the tapped stranded wire without compromising its conductive integrity. Then, you insert one or more stripped wires through the small cap, and hand tighten for a multiple hookup using only one connector.

This package contains 6 mini tap connectors designed for 20- to 22-gauge wires. Warranty: 60 days.

READ LESS

What's in the box:

Customer reviews

Loading reviews...

Posi-Products™ Wire Connectors Reviews

Average Customer Review(s):

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

More details on the Posi-Products™ Wire Connectors

Product Research

Features

Overview: This connector kit comes with 6 Posi-Tap tap connectors. Posi-Tap connectors allow you to tap into wires without cutting or stripping them. Each connector has a tapered design and a threaded cap on each end. Just insert wire to be tapped into the large cap (this is the Tap end) and hand tighten into the barrel. The conductor point pierces the tapped wire without compromising its conductive integrity. Insert the stripped wire through the small cap (this is the Accessory end), then tighten. An internal conductor runs the length of the Posi-Tap, giving you a solid electrical connection. The Posi-Tap connectors are vibration proof, fully insulated, and reusable.

Note: If multiple wires are inserted into the accessory cap, the stripped wire ends should be twisted together.

Dimensions:

  • Posi-Tap Connectors: compatible with 20-22 gauge wire on the Tap end and 18-24 gauge wire on the Accessory end
    • Length: 0.875"
    • Maximum Diameter: 0.28"
    • Width of Slot in Large Cap (Tap end): 0.065"
    • Diameter of Hole in Small Cap (Accessory end): 0.09"

Loading accessories...

Customer Q&A

Q
Crutchfield asked: Why did you buy this?
A
It was recommended by Crutchfield adviser, Maverick. [ Juan  Mar 06, 2019 ]
A
Looked convenient to use. No cutting of the factory wire to splice into the license plate light when installing a backup camera. [ Craig  Feb 25, 2019 ]
A
Great way to tap into small gauge wires. [ Kyle  Jan 26, 2019 ]
A
for ease of connecting peripherals where I am not worried about loss of quality by not properly splicing/soldering. [ P  Jan 23, 2019 ]
A
ease of wire connection [ Floyd  Dec 05, 2018 ]
A
Very easy to use and makes a nice clean connection. [ DALE  Nov 15, 2018 ]
A
Saw video on youtube that used them. [ Joshua  Jul 18, 2018 ]
A
Used them in the past, work very well. [ Scott  Jun 12, 2018 ]
A
it was recommended to me by an advisor [ Jose  Jun 07, 2018 ]
A
makes it look cleaner when you tap into factory wiring [ Derrick  May 10, 2018 ]
A
Advisor recommended [ David  Apr 27, 2018 ]
A
ease of use [ christopher  Apr 04, 2018 ]
A
Recommended by Garrett. [ Brad  Mar 23, 2018 ]
A
advisor added it [ Tony  Mar 08, 2018 ]
A
Garrett recommended [ GEOFF  Feb 06, 2018 ]
A
used them before and great product [ JIMMY  Jan 28, 2018 ]
A
Used them before and they work well. [ D  Jan 26, 2018 ]
A
To tap [ Charles  Jan 13, 2018 ]
A
Used them before, work great. [ Brian  Jan 03, 2018 ]
A
although I typically splice my connections, using solder and heat shrink. I bought these for hooking up a line out to factory speaker wiring that's located in a tight space. these will make things easier and the design looks a lot better than crimps and I trust the wiring wont pop out. If you want to get a signal from factory wiring without cutting anything, go with these, and if you sell the car and rip out your system, just unscrew the cap and all is back to normal. [ Jacqueline  Nov 09, 2017 ]
A
Simplicity. Did not want to cut factory Harness to add LOC [ Edwin  Aug 06, 2017 ]
A
recommended by Crutchfield Advisor. [ Gary  Jun 26, 2017 ]
A
I chose these because they are cheap and very helpful when installing car speakers and subwoofers [ Cameron  May 23, 2017 ]
A
The 3m crimp connector failed to make good contact and damaged the wire. This looks like a better way to tap into a wire. [ Peter  Apr 26, 2017 ]
A
I have this exact same deck and harness in my 07 ram and I need them so I can tap in to the obdll system so the radio can read car code [ ivan  Apr 26, 2017 ]
A
recommended by Mac the sale adviser [ CALIXTO  Apr 13, 2017 ]
A
was recommended for tapping into wires for steering wheel controls [ Bruce  Mar 26, 2017 ]
A
To easily rap into the ODBII wire with the IDatalink Maestro [ Will  Mar 19, 2017 ]
A
recommended by Otis [ leslie  Mar 14, 2017 ]
A
They appear convenient and were recommended by one of your advisors. [ JOSEPH P  Feb 21, 2017 ]
A
These are used to gonnect a wire to the harness without cutting. [ robert  Feb 10, 2017 ]
A
excellent reputation of this product [ Jerry  Feb 02, 2017 ]
A
just need to tap on to my turn single for led halos and Resistors [ A  Dec 24, 2016 ]
A
Great for 3 way splicing short wires! [ Jens  Dec 13, 2016 ]
A
Extremely helpful for all types of wiring installs. Well worth the money. [ W  Dec 12, 2016 ]
A
I was recommended this product by Tyler [ Dylan  Dec 03, 2016 ]
A
better than scotch clips [ Fred  Nov 24, 2016 ]
A
Again, okay if you don't have a soldering iron or gun. Will handle 16-18 gauge wire, but nothing larger. [ Charles  Oct 25, 2016 ]
A
Required to install stereo into '88 Mercedes 560SL. [ Greg  Oct 21, 2016 ]
A
They are expensive but they are the best device for work on vehicle wiring especially around the canbus wiring. [ Stephen  Oct 11, 2016 ]
A
Recommended by advisor [ Tony  Oct 05, 2016 ]
A
Ease of use did not want to cut factory wire in my truck [ CHARLES M  Sep 25, 2016 ]
A
recommended [ Michael  Jul 21, 2016 ]
A
Because Adam suggested it. Adam's Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=39 [ Preston  Jun 18, 2016 ]
A
Simplify & secure connections [ Francisco  May 10, 2016 ]
A
To make it easier to tap into speaker wires. [ Alejandro  May 08, 2016 ]
A
After buying two similar products reviews said these are the best. [ Richard  Mar 30, 2016 ]
A
Easiest way to tap into existing wires. No cutting/splicing. [ J.R.  Feb 20, 2016 ]
A
Recommended by someone who completed a similar install and really wished he had bought these beforehand. [ RobbyRobb  Dec 07, 2015 ]
SHOW MORESHOW LESS

1 question already asked

Q
do these fit wires on sony receivers?
[ Karl  Dec 02, 2014 ]
4 answers
A
They will fit just fine, but I don't believe they offer any better or faster connection than regular old butt connectors.
[ TRAVIS D  Dec 04, 2014 ]
A
I found that they worked quite well. I used them to connect a new Sony receiver to a Honda wiring harness connector that i got from crutchfield. So i was able to do all of the wiring and connections in good light sitting in my living room. Once i was done all i had to do was pull the factory radio and plug in my new radio. I had to plug in the antenna connector as well but it was simple. Best connector i have used yet. After you have done a connection or two it is pretty simple and quick. I've been installed for some time now and no issues. Scott
[ SCOTT  Dec 04, 2014 ]
A
The size wires they fit are listed on the packages. I love them because they are reusable, too. If you cannot see the sizes on the packages you could go to the posi-products website to see, then return to. Crutchfield to purchase. (Factory charges postage, crutchfield does not and is very fast getting them to you!)
[ FREDERICK A  Dec 03, 2014 ]
A
The wires on all car stereos are the same size/gauge. The only exception would be amps and or speaker upgrades. So the answer is yes, they will fit to your sony
[ STEPHEN  Dec 03, 2014 ]

Loading articles...

TOP