JBL Brewery Sound System Bundle

Mixer Amplifier
Surface Mount Speakers
Surge Protector

Mixer Amplifier

Overview: The JBL CSMA 2120 is a two-channel commercial mixer-amplifier with eight input channels. The CSMA series mixer-amps are designed and built for commercial sound applications, such as restaurants and coffee shops, or educational applications. The CSMA 2120 is rack-mountable in a 1U rack space, and includes a rack-mount kit.

DriveCore Technology: The JBL CSMA series utilizes DriveCore technology developed by Crown, another Harman brand. DriveCore technology integrates the amplifier drive stage into the power output stage, and fuses everything into a chip the size of a dime. This significantly reduces the size and weight of the mixer-amps into a 1U rack space.

Harman GreenEdge: JBL Commercial mixer-amps are manufactured under Harman's GreenEdge environmental initiative, utilizing recycled copper, aluminum and steel, an energy-saving powder coat finishing process, and conforming to lead-free RoHS standards and other environmentally-conscious manufacturing processes. The result is an 80% improvement in efficiency over previous models. In addition, the CSMA mixer-amplifiers are EnergyStar certified.

Front Panel: The front panel of the CSMA 2120 includes eight independent input level controls. Each level control has a ring which illuminates green to indicate presence of an input signal. Two volume controls (Master 1 and Master 2) let you independently control the output of the two amplifiers. The illuminated rings surrounding the volume controls will light green with the presence of a signal. If the signal reaches the threshold of clipping or audible distortion, the ring will glow red. Bass and treble tone control potentiometers are provided on each output channel. A flat or Phillips screwdriver is needed to adjust bass and treble.

Input Configuration: The CSMA 2120 has 8 inputs which will accept 3-pin or 5-pin Euro-block mic/line connectors. These are designed for pre-built or professionally-wired balanced line 22-24 gauge cables. Six of the inputs also have RCA mono sum connectors for connecting audio devices, such as CD/DVD players. The remaining two inputs (Ch1 and Ch5) are capable of being used for Voice-activated Ducking (VOX function) and Priority Muting, and utilize the supplied 5-pin Euro-block connectors. Each of the 8 inputs has a Line/Mic switch for selecting the input gain, according to the source used.

Output Configuration: The CSMA 2120 has two powered outputs that are designed for low impedance or constant-voltage systems. These outputs will accept 5-pin Euro-block connectors. Pre-built or professionally-wired, high-quality two-conductor, heavy gauge speaker wire is recommended. At distances of up to 25 feet, 16-gauge wire is recommended. From 26-40 feet, you should use 14-gauge speaker wire. To drive distributed speaker systems designed to operate at 70V or 100V, the 5-pin Euro-block connectors have designated terminals for 70V, 100V and Common. For 8-ohm speakers, the + and - terminals should be used.

Auxiliary Outputs: Two Auxiliary outputs are available for connecting additional amplifiers. The audio signal is the mix of the input channels, and the output is at a fixed level. The master volume control and tone controls have no effect on the aux output signal. The Aux 1 and Aux 2 outputs each have 3-pin Euro-block connectors.

Input Routing DIP Switches: The CSMA 2120 has a default routing of input channels 1-4 to amplifier 1 and input channels 5-8 to amplifier 2. Six DIP switches for each channel are provided to send the signals to the appropriate amplifiers. Switches 1-4 allow channels 1-4 respectively to be sent to Amp 2 (in addition to Amp 1), and switches 7-10 allow channels 5-8 respectively to be sent to Amp 1 (in addition to Amp 2). Each channel can be configured independently as you desire.

Phantom Power: Phantom power (27V) can be applied to all microphone inputs by turning on the Phantom Power switch (one of the unit's DIP switches).

Hi-Z Switch: By default, the CSMA 2120 is configured to drive low impedance speakers (4 Ohms, minimum). The unit has two DIP switches, one for each amp, that will configure the unit to drive 70V or 100V speaker systems independently and directly. When driving these high impedance speakers, the amplifier automatically inserts a 70Hz high-pass filter.

VOX Function: Voice-activated ducking, or the VOX function, is available on input channels 1 and 5. This function causes attenuation of the overall output level of the amplifier when the input levels on channels 1 and/or 5 reach a set threshold. A designated trim pot is provided on the two channels for setting the audio input level required to activate ducking. A typical usage of the VOX function is to automatically lower the background music in the room while making announcements over the audio system. After the announcement is made, the background music returns to its previously set level.

Sleep Mode: To save energy, the unit is designed to go into sleep mode when no signal is present for approximately 30 minutes. When the input signal returns, the amp will wake up and return to normal operating mode.

Remote Volume Control: Two RJ-45 ports are provided on the back panel for plugging in up to 2 CSR-V remote volume controllers via Ethernet cables. One RJ-45 port is provided to control the volume for Amp 1, and one port is provided for Amp 2.

Specifications:

• Maximum Output Power: 120 watts per channel (into 4Ω or 8Ω, 1kHz, ≤ 0.5% THD)
• Line Output Level: 5.0V RMS into 10 kΩ
• Frequency Response:
  • 4/8Ω Output: 20 Hz - 20 kHz (+/- 2dB)
  • 70V/100V Outputs: 80 Hz - 15 kHz (+/- 2dB)
  • Line Out: 20 Hz - 20 kHz (+/- 1dB)
• Total Harmonic Distortion (THD):
  • Power Amp Output: <0.5%, 20Hz-20kHz
  • Line Output: 0.05% typical
• Signal-to-Noise Ratio: >90 dB
• Phantom Power: 27 VDC
• Minimum Load Impedance:
  • Low Impedance Output: 4Ω
  • 70V Output: 40Ω
  • 100V Output: 80Ω
• Net Weight: 12.1 lbs

Surface Mount Speakers

Control Contractor Series Surface Mount Speaker: The JBL Control 25AV is a compact indoor/outdoor speaker providing premium performance in background, foreground, and music systems. The Control 25AV is weather resistance so its perfect for indoor and outdoor applications. Its speaker design ensures excellent sound character, providing pleasant, enveloping sound throughout the listening area.

Note: All JBL Control Contractor loudspeakers (both ceiling speakers and surface-mount models) are designed with a similar sonic signature, allowing for mixing and matching of the various models within an application, providing a similar tonal character throughout the entire listening area.

Two-Way Speaker Design: The Control 25AV speaker employs a 0.75" titanium coated horn-loaded tweeter and a 5.25" polypropylene coated woofer for high fidelity sound performance. The woofer features JBL's WeatherEdge, a seamless, butyl rubber extension of the woofer surround, to protect critical transducer elements.  The polycarbonate tweeter diaphragm is reinforced with a thin film of titanium for added rigidity and endurance.

Even Coverage Area: The Control 25AV provides an even 100° x 100° coverage area to ensure excellent sound quality throughout the listening area.

70/100V or 8-Ohm: The top-quality transformer, with reduced saturation, allows use on either 70-volt or 100-volt distributed speaker lines, with similar performance fidelity. In the bypass position, the 8-ohm impedance allows for use with conventional amplifiers.

• 70V Taps: 60W, 30W, 15W, 7.5W
• 100V Taps: 60W, 30W, 15W

Weather Resistance and Paintable Enclosure: Weather resistance is maximized by the Control 25AV speaker's high-impact polystyrene cabinet and stainless steel grille. The cabinet and grille also accepts a variety of paints to match any décor.

Note: The Control 25AV exceeds Mil Spec 810 for humidity, salt spray, temperature and UV. IEC 529 IP-X4 splash-proof rating.

Speaker Terminals: The Control 25AV indoor/outdoor speaker utilizes screw-down speaker terminals. These nickel/zinc rust-resistant terminals ensure a secure input connection. A terminal cover is provided to further protect the speaker connections.

Mounting Options: The unique, global patent pending "InvisiBall" mounting method is simple to install, aims easily, and provides a high degree of theft deterrence.

SonicGuard Protection: JBL's exclusive SonicGuard overload protection is virtually inaudible to the listener, ensuring reliability while providing full fidelity sound.

Specifications:

• Frequency Response (±3dB): 150Hz to 20kHz
• Frequency Range (±10dB): 70Hz to 23kHz
• Power Capacity: 200 watts (continuous program)
• Nominal Impedance: 8Ω
• Sensitivity: 87dB (1W, 1m)
• Maximum SPL: 103dB (continuous average music or speech)
• Dimensions: Width 7.4375" Height 9.3125" Depth 6.3125"
• Weight: 9 pounds

Surge Protector

Overview: The Furman SS-6B is a heavy duty 6-outlet power strip with a flexible 15-foot power cord (straight 3-pronged plug). Its heavy duty metal construction can withstand the rigors of professional stage usage. The SS-6B features standard level surge protection and EMI/RFI filtering to reduce distortion and hum from the AC line. It has an illuminated on/off/reset switch and a built-in circuit breaker. A red LED on the top of the power strip indicates that the circuit breaker has tripped and the unit has protected the connected equipment.