Chat
Contact us
Close contact box
Connect ID #
045 521 313 3
Connect ID #
045 521 313 3
All finished with your chat session?

We’ll email you a transcript of this conversation for your records.

Our contact center is currently closed.

Please enter your name.  
Please enter a valid email address. Why is this required?
Please enter your US phone number.  

For Tech Support, call 1-888-292-2575

Thank you, !
Our conversation will be emailed to
Please enter a question  
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  

Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Bose® F1 PA Bundle

Package includes a Bose F1 Model 812 flexible array powered loudspeaker and an F1 subwoofer

Item # 700F1BUN

Do you play music in different venues that require different kinds of speaker coverage? Bose's F1 Model 812...

Do you play music in different venues that require different kinds of speaker coverage? Bose's F1 Model 812...

Item # 700F1BUN

Temporarily out of stock

Ship date unknown

$2,198.00 -$200.00 Package discount

$1,998.00

About the Bose® F1 PA Bundle

A PA for every occasion

Do you play music in different venues that require different kinds of speaker coverage? Bose's F1 Model 812 flexible array loudspeaker and F1 subwoofer will deliver loud, clean, bass-throbbing music for almost any occasion. You can change the speaker's vertical coverage pattern by choosing one of four settings that move the top and bottom sections of the array inward or outward. When the occasion calls for loud bass, the F1 powered subwoofer gives you Bose's famed sound quality in a powerful package that's small enough to fit in the back seat of your car.

A PA for every occasion

Do you play music in different venues that require different kinds of speaker coverage? Bose's F1 Model 812 flexible array loudspeaker and F1 subwoofer will deliver loud, clean, bass-throbbing music for almost any occasion. You can change the speaker's vertical coverage pattern by choosing one of four settings that move the top and bottom sections of the array inward or outward. When the occasion calls for loud bass, the F1 powered subwoofer gives you Bose's famed sound quality in a powerful package that's small enough to fit in the back seat of your car.

The F1 Model 812

The F1 Model 812 array features eight mid/high frequency drivers, plus a 12-inch low-frequency woofer, all powered by a 1000-watt Class D amplifier. A built-in limiter makes sure the amp won't hurt anything. The small drivers' custom waveguides and flexible baffles produce the speaker's wide horizontal coverage pattern and narrow vertical pattern. A 2-channel mixer accepts both microphone and line level signals. A balanced output lets you add the matching F1 subwoofer to the system.

The sub

The F1 subwoofer enclosure is built around two 10" Bose subwoofers. Its Class D amplifier drives the subs with 1000 watts, giving the enclosure up to 130 dB of output. Amplifier controls include phase switching and a switchable high-pass filter for the line outputs, giving you additional control over your sound. The sub's LED indicators monitor power on status, thermal fault, clipping, and built-in limiter functions. The wood cabinet features high-impact composite end caps to help protect against damage, while the enclosure's built-in handles make transport easier.

Bose F1 PA bundle

System integration

A built-in speaker stand allows you to connect the F1 sub and the Model 812 speaker stack into a single, stable unit, creating an extremely portable, full-range PA that excels in a variety of environments. From live music and DJs to houses of worship and work presentations, the Bose F1 system will give you the clarity and depth you're looking for.

READ LESS

Product highlights:

  • powered PA speaker array and subwoofer
  • F1 Model 812 Flexible Array
    • eight 2-1/4" mid/high frequency drivers and one 12" woofer
    • bi-amplified with 1000 watts total power
    • max SPL: 132 dB
    • frequency response (-3 dB): 52-16,000 Hz
    • 4 selectable coverage patterns: Straight, J, Reverse J, and C
    • 2-channel input mixer (combo XLR/TRS, RCA, TRS) with input volume controls
    • output limiter
    • dimensions: 13-1/8"W x 26-1/8"H x 14-5/8"D
    • weight: 44.5 lbs.
    • warranty: 2 years
  • F1 powered subwoofer
    • two 10" woofers
    • 1000-watt Class D amplifier
    • maximum output level: 130 dB SPL
    • frequency response: 40-100 Hz (-3 dB)
    • dimensions: 27"W x 16-1/8"H x 17-5/8"D
    • weight: 57 pounds
    • warranty: 2 years
  • Our 60-day money-back guarantee

What's in the box:

  • This Bose speaker bundle includes 2 individually boxed items:
  • PA Speaker:
  • F1 Model 812 Loudspeaker
  • AC Power cord
  • Owner's manual
  • Subwoofer:
  • F1 Powered subwoofer
  • AC Power cord
  • Owner's manual

Customer reviews

We don't have any reviews, yet.
Submit a review and then enter to win a $350 gift card.
Be the first to review this product

Loading reviews...

Thanks for submitting your review

Filter by rating

Customer photos

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

<< >>

More details on the Bose® F1 PA Bundle

Russ B.

Product Research

Features
F1 Model 812
F1 Subwoofer

Features

Bundle Overview: The Bose F1 Bundle includes an F1 Model 812 portable loudspeaker, with Bose's unique Flex Array driver system, and an F1 compact powered subwoofer. The F1 Subwoofer includes a built-in stand, allowing the F1 Model 812 loudspeaker to sit raised on top of it for increased coverage area and a more compact form. The portable PA system is an ideal choice for live performances, mobile DJs, houses of worship, schools and universities, presentations, and more.

F1 Model 812

Bi-Amped Drivers: The F1 Model 812 features 8 mid/high drivers oriented in a vertical line array, with each driver mounted in a custom 100˚ waveguide that helps deliver wide, consistent sound coverage. The loudspeaker also features a built-in 12" high-output woofer, with a frequency range extending down to 43Hz. Both the 12" woofer and the mid/high drivers are powered by 2 built-in, high-output, Class-D amplifiers for a combined 1000 watts of peak power.

Flex Array: The Flex Array design allows you to change the coverage pattern based on how the audience is situated relative to the loudspeaker. The top and bottom speaker arrays are held in place with magnets and can be manipulated by simply pushing or pulling on them. These magnets are also used to trigger internal sensors that automatically adjust the EQ according to the array shape. Four Flex Array patterns are available and include:

  • Straight Pattern: Projects sound straight in front of the loudspeaker and is used when the audience is standing with their heads at approximately the same height as the loudspeaker's position.
  • J Pattern: Projects sound straight and downward. Best use is when the loudspeaker is on a raised stage with the audience seated below on the floor.
  • Reverse-J Pattern: Projects sound straight and upward, for use with an audience in raked seating that starts at loudspeaker height and extends above the top of the loudspeaker.
  • C Pattern: Projects sound in an evenly-angled array, both up and downward. Used for raked seating in an auditorium when the first row is on the floor with the loudspeaker.

Inputs and Output: The F1 Model 812's rear panel features 2 input channels and 1 summed output:

  • Input 1: Includes an XLR/1/4" combo jack that can accept balanced microphone signals or balanced/unbalanced line-level signals. An accompanying Signal Input switch can be set to Mic or Line-Level for changing the input's sensitivity range.
  • Input 2: This includes a 1/4" jack for balanced/unbalanced instrument- and line-level signals, along with a set of stereo RCA jacks for running playback devices such as a CD or portable media player. Signals on both RCA jacks are summed to mono.
  • Line Output: A balanced male XLR jack provides a summed mix of Inputs 1&2, post volume control. This allows daisy-chaining of multiple speakers together.

Controls and Indicators: Along with both inputs and the output, the loudspeaker's rear panel includes the AC power input, Power On/Off switch, and the following controls and indicators:

  • Volume: Inputs 1&2 each include their own Volume control.
  • EQ: This switch allows the speaker array to work independently or in conjunction with the Bose F1 Subwoofer. Options include:
    • Full Range: No filtering is done to the signal.
    • With Sub: Engages a 100Hz high-pass filter to the signals played through the F1 Model 812 when run from the output jack of a Bose F1 subwoofer. Note: The EQ setting does not affect the signal going to the Line Output jack.
  • Front LED: This 3-position switch determines how the front-panel Power LED will function.
    • Power: Enables front LED to indicate power status.
    • Limit: Engages a limiting display on the front LED.
    • Off: Turns off the front-panel LED.
  • LED Indicators (rear-panel):
    • Power/Fault: Blue = power on. Red = fault condition.
    • Limit: Lights amber when the system is limiting the signal (protection mode).
    • Signal/Clip: Each Input includes its own Signal/Clip LED: Green = signal present, Red = signal is clipping.

Portability: The F1 Model 812 features built-in carry-handles both on top and on back of the speaker for easy portability.

Mounting: Designed primarily to be placed on a flat surface during use, the loudspeaker also features multiple mounting methods. A built-in extension stand in the F1 Subwoofer's enclosure allows the loudspeaker to sit extended above the sub. The F1 Model 812 also includes a standard 35mm socket on the bottom of the enclosure for use with an optional tripod stand. Threaded M8 inserts are provided, 2 on top and 4 on back of the speaker, for "flying" or suspending the loudspeaker from rigging. Optional Pan-and-tilt and U-Brackets mounting kits (sold separately) are also available for installed applications.

F1 Subwoofer

Amp and Drivers: The F1 Subwoofer features two 10" high-excursion woofer drivers mounted in a compact, ported enclosure and powered by a built-in 1000 watt amplifier. The F1's unique enclosure provides maximum bass output while its compact design keeps it light and easy to transport.

Inputs and Outputs: The F1 Subwoofer's rear panel features 2 Line Inputs and 2 Line Outputs:

  • Inputs 1&2: Each of the two inputs consists of an XLR/1/4" combo jack that can accept unbalanced line-level signals.
  • Line Outputs 1&2: Two balanced male XLR jacks provide balanced line-level "thru" signals (pre-volume control) from each one's corresponding Input jack. These can be sent to additional powered loudspeakers or subwoofers.

Controls and Indicators: Along with both inputs and outputs, the loudspeaker's rear panel includes the AC power input, Power On/Off switch, and the following controls and indicators:

  • Volume: Adjusts the subwoofer's output level.
  • Line Output EQ: Determines whether the Line Output signals will be high-passed or not. Options include:
    • Thru: No filtering is done to the output signal.
    • HPF: Engages a 100Hz high-pass filter to the Line Output signals.
  • Polarity: 2-Way switch with selections of Norm and Rev (reverse).
  • Front LED: This 3-position switch determines how the front-panel Power LED will function.
    • Power: Enables front LED to indicate power status.
    • Limit: Engages a limiting display on the front LED.
    • Off: Turns off the front-panel LED.
  • LED Indicators (rear-panel):
    • Power/Fault: Blue = power on. Red = fault condition.
    • Limit: Lights amber when the system is limiting the signal (protection mode).
    • Signal/Clip: Each Input includes its own Signal/Clip LED: Green = signal present, Red = signal

Portability: The F1 Subwoofer features built-in carry-handles both on top and on back of the speaker for easy portability.

Paired System: The F1 Subwoofer can be used in conjunction with other full-range loudspeakers, but provides ideal performance when paired with the included Bose F1 Model 812 powered loudspeaker. The F1 Subwoofer features a built-in speaker stand that can provide a raised mount for the F1 Model 812 enclosure to sit securely on. A cable channel on both sides of the stand allow cabling for the F1 Model 812 to be hidden from view.

Loading accessories...

Customer Q&A

2 questions already asked

Q
Would this system fit in my 2014 mustang gt premium?
[ Terry  May 13, 2020 ]
1 answer
A
Hi Terry, the Bose F1 PA package is intended for professional audio or commercial audio use, and would not be compatible with a vehicle's electrical systems. Please chat with us online or by phone at 1-800-324-9695, we will be happy to help you build a system for your vehicle.
[ Jess  Jun 01, 2020 ]  Staff

Loading articles...

TOP