Contact us
Close contact box

MB Quart MBQ-STG5-1

Stage 5 audio system with receiver, four speakers, two amps, and a 10" subwoofer — fits select 2014-up Polaris RZR models

Item # 700MSTG51

This Stage 5 audio system is MB Quart's top-of-the-line RZR audio system.

Find what Fits your car

This Stage 5 audio system is MB Quart's top-of-the-line RZR audio system.

Need help?
Contact our Virginia-based experts.
Ask a question

Item # 700MSTG51

Ships free

Low stock
$1,899.99

About the MB Quart MBQ-STG5-1

Simply stunning sound

This Stage 5 audio system is MB Quart's top-of-the-line RZR audio system. Designed to fit select 2014-up Polaris RZR models, the system includes a marine receiver and dash kit, four 8" speakers, custom speaker pods, a 10" subwoofer, two compact amplifiers, and all the hardware you'll need for a hassle-free installation.

Simply stunning sound

This Stage 5 audio system is MB Quart's top-of-the-line RZR audio system. Designed to fit select 2014-up Polaris RZR models, the system includes a marine receiver and dash kit, four 8" speakers, custom speaker pods, a 10" subwoofer, two compact amplifiers, and all the hardware you'll need for a hassle-free installation.

An Apple-ready receiver

MB Quart's GMR-3 marine digital media receiver packs a ton of features into a compact design that's made for the outdoors. And it fits into a custom dash kit that's made for your RZR.

You can tune in to AM/FM radio, of course, but the big deal is built-in Bluetooth® that lets you stream music from your smartphone or other Bluetooth-enabled device. The GMR-3 is Apple-ready too, so you can access the iTunes collection on your iPhone®, iPod®, or iPad®. You can also use the rear aux input for your music player, or plug a thumb drive into the rear USB port to enjoy your favorite music.

Four 8" speakers

The custom-molded front speaker pods fit right into your RZR and hold a pair of powerful, outdoor-ready MB Quart NH1-120B 8" speakers. The 1" compression horns give you brilliant highs that you can hear over the roar of the outdoors, while the rugged poly cones handle everything else with MB Quart's usual depth and clarity. The pods are custom-designed for your RZR, and bolt-in installation means no cutting and no hassles.

Out back, you'll find another pair of NH1-120B speakers mounted in wakeboard tower enclosures. If you like it loud, you'll really love this speaker system.

A pair of compact amplifiers

MB Quart's NA2-400.2 amplifier packs a lot of power into a small package that's perfect for powersports applications. This rugged Class D amp delivers 200 watts RMS per channel at 2 ohms, so the four speakers will get the juice they need.

For the 10" subwoofer, there's an MB Quart NA2-400.1, a compact 400-watt mono amp with plenty of juice. This marine-rated Class D amp boasts a MOSFET power supply, an aluminum heat sink, and nickel-plated inputs, plus on-board equalization and three-stage protection circuits. Quick-release connectors make installation quick and easy.

Big, brawny bass

The FW1-254 is part of MB Quart's Formula line of subs. It's designed for tight spaces like the ported enclosure that fits right into your RZR's underdash area. With up to 400 watts of thump (at 2 ohms) on tap, it'll bring plenty of boom to your outdoor adventures.

READ LESS

Product highlights:

    General Features:
    • custom-fit audio system includes a marine receiver, four 8" speakers, 10" subwoofer, two compact amplifiers
    • also includes four custom speaker pods, sub enclosure, dash kit, dash-mount USB and AUX panel, wiring, and mounting hardware
    • easy installation in your RZR
    • black textured pod finishes match the stock interior
    GMR-3 marine receiver:
    • AM/FM marine digital media receiver (does not play CDs)
    • built-in amp (20 watts x 4 RMS/40 peak x 4 channels)
    • built-in Bluetooth for music streaming
    • works with Apple and Android smartphones
    • warranty: 1 year
    NH1-120B speakers:
    • 8" speakers made for off-roading (front and rear pairs)
    • compression horn tweeters
    • weather-resistant poly woofer
    • rubber surround
    • impedance: 4 ohms
    • power handling: up to 90 watts RMS (180 watts peak)
    • warranty: 1 year
    NA2-400.2 amplifier:
    • 2-channel Class D amplifier for powersports and marine applications
    • 100 watts RMS x 2 at 4 ohms (200 watts RMS x 2 at 2 ohms)
    • frequency response: 20-20,000Hz
    • low-pass crossover
    • bass boost: 0-12 dB at 45 Hz
    • dimensions: 3-11/16" x 5-1/2" x 1-3/4"
    • warranty: 1 year
    NA2-400.1 amplifier:
    • made for powersports and marine use
    • Class D mono amp
    • 200 watts x 1 at 4 ohms (400 watts x 1 at 2 ohms)
    • warranty: 1 year
    FW1-254 subwoofer:
    • polypropylene cone with rubber surround
    • dual 4-ohm voice coils
    • power handling: 300 watts RMS (600 watts peak)
    • warranty: 1 year
    • Our 60-day money-back guarantee
    • MFR # MBQ-STG5-1

    What's in the box:

    • This speaker system consists of 2 main shipping boxes each containing individually packaged items:
    • Shipping Box #1 -
    • GMR-3 AM/FM Bluetooth Controller:
    • Controller (installed 10" wiring bundle)
    • 12" 12-Pin wiring harness
    • U-Bracket
    • Two 1-1/4" bolts
    • 2 Lock-washers
    • 2 Nuts
    • Controller operation guide
    • PSAP-2:
    • USB/3.5mm input port (attached 9.5' USB type-A and stereo RCA cables)
    • NHT1-120BPR Speakers:
    • 2 Loaded speaker enclosures (w/ attached mounting clamp base and 7" bare-ended speaker wire)
    • 2 "A" Clamps
    • 10 Sets of rubber Clamp-bushings (sizes: 1.5"/1.625"/1.75"/1.875"/2"/2.125"/2.25"/2.375"/2.5"/2.625")
    • 4 Crimp connectors
    • Bushing legend (cardboard)
    • Installation guide
    • RZR-POD8 Speaker Pods:
    • 2 Speaker pods (each w/ installed 21" speaker wire)
    • Four 1" hex-head bolts
    • 8 Flat-washers
    • 4 Nylock nuts
    • Eight 1-1/8" screws
    • NH1-120B 8" Compression Drivers:
    • 2 Speakers w/ attached grilles
    • Speaker installation guide
    • RZR-RDAH Wiring Kit:
    • 36" Main power/ground harness (inline 50A Maxi fuse)
    • 110" Left rear speaker 4-wire harness
    • 110" Right rear speaker 4-wire harness
    • 79" Y-harness for front speakers
    • 33" 4-Seat extension harness
    • Two 26" stereo RCA cables (male plugs on both ends)
    • Two 5" LED jumper harnesses
    • Ten 7" wire-ties
    • RZR-AMPD:
    • Amplifier mounting plate
    • Eight 1/2" screws
    • 8 Flat-washers
    • 8 Nylock nuts
    • RZR-DASHR:
    • GMR-3 Radio installation kit
    • Switch-plate cover for installation kit
    • SWVL-1B (x2):
    • Swivel-mount (each with eight 3/4" screws)
    • NA2-400.2 Amplifier Kit:
    • Amplifier (attached 7" 3-pin & 4-pin harnesses)
    • 16" Power/ground harness (inline 30A ATC fuse)
    • 16" 4-Pin speaker harness
    • Four 1-1/8" screws
    • Installation guide
    • 2 Compression horn back-plates
    • System installation instructions
    • Compression horn instructions
    • Shipping Box #2 -
    • FW1-254 Subwoofer:
    • 10" Dual 4 ohm voice-coil subwoofer
    • Subwoofer installation guide
    • NA2-400.1 Amplifier:
    • 2-Channel amplifier (attached 7" 3-pin & 2-pin harnesses)
    • 16" Power/ground harness (inline 30A ATC fuse)
    • 16" 2-Pin speaker harness
    • Four 3/4" screws
    • 4 Flat-washers
    • 4 Lock-washers
    • Remote level control (attached 15.5' cable w/ Molex connector)
    • Amplifier installation guide
    • RZR-SUB10:
    • Subwoofer enclosure (attached 50" speaker wires (20" external / 30" wired internally)
    • 2 Mounting plates
    • Eight 1/2" nuts
    • 8 Flat-washers
    • 2-1/4" Metal support tab
    • Eight 16mm Torx screws (T25)

    Customer reviews

    We don't have any reviews, yet.
    Submit a review and then enter to win a $350 rewards card.
    Be the first to review this product

    Loading reviews...

    Thanks for submitting your review

    Filter by rating

    Customer photos

    Sort reviews

    Sort by:
    Items per page:
    View page:

    Verified customer (What's this?)
    Verified employee purchase (What's this?)

    Pros:

    Cons:

    Crutchfield response

    << >>

    More details on the MB Quart MBQ-STG5-1

    Stacey B.

    Product Research

    Features
    In-Dash Components
    Main Speakers & Amp
    Subwoofer & Amp

    Features

    Overview: MB Quart has partnered with Polaris to engineer a select group of UTV-tuned audio systems designed to integrate seamlessly into select 2014-up Polaris RZR UTVs. The MB Quart STG5-1 800 watt sound system includes; the GMR-3 AM/FM Bluetooth controller with Apple control; the PSAP-3 auxiliary input adapter; the NA2-400.2 two channel amplifier (2 x 200 @ 2Ω / 2 x 100 @4Ω); a pair of 8" compression horn drivers, with custom-molded mounting pods designed specifically for the RZR; a pair of 8" compression horn drivers, pre-installed in weather-proof enclosures designed to be mounted on roll cage tubing; the NA2-400.1 (1 x 400W) subwoofer amplifier; and the FW1-254 subwoofer, along with a custom mounting enclosure for the subwoofer. The system includes all mounting hardware along with pre-configured wire harnesses for integrating each component.

    In-Dash Components

    GMR-3: The STG5-1 system includes a GMR-3 in-dash controller that's been designed specifically for powersports applications. The heavy-duty splash proof front panel includes oversized, illuminated, rubber buttons that resist moisture and dirt while allowing easy use with gloves on. The in-dash controller includes a built-in 4 x 20 watts RMS amplifier with both front/rear speaker wire and RCA pre-outs (4V each). Controller features include:

    • Time Format: The integrated Clock feature can be set for either 12hr. or 24hr. time.
    • Fade/Balance Controls
    • Audio Adjustments:
      • Bass/Treble: Both of these tone controls have a level range from -7 to +7, with the default setting at 0.
      • Loud: The Loudness feature can be toggled On or Off.
      • EQ: The GMR-3 includes 4 preset sound modes along with an Off setting. Presets include: Flat, Classic, Pop, and Rock.
    • AM/FM Tuner: The GMR-3 can tune in FM or AM signals with the option for either USA or European tuning. A Band button allows switching between AM and FM while Up/Down arrow buttons can be used to automatically Seek stations up or down the band. The tuner has an FM frequency range of 87.5MHz - 108MHz.
      • Note: An AM/FM antenna is not included with the sound system.
    • USB/Apple Control: The in-dash controller features a rear panel USB (type-A, 2.0) port that can be used to playback MP3 or WMA files from a connected USB flash drive or from an iPhone, iPod, or iPad. Controls include Play/Pause, Next/Previous Track, and Fast-Forward/Rewind.
    • Aux In: A pair of rear-panel RCA jacks is provided for running analog audio signals in from a playback device. The included PSAP-2 dual accessory port allows both the USB and Aux Input jacks to be brought to the front dash for easy access. It features both USB and RCA ends, that plug in at the back of the radio, with a USB and 3.5mm audio jack on the other end that can be mounted on a dash or console.
    • Bluetooth: The GMR-3 features built-in Bluetooth technology that allows you to stream music wirelessly from your Bluetooth enabled smartphone or tablet. A simple secure pairing method lets you search and select "MB Quart" from your mobile device. A default PIN code of "0000" may be entered if required. After initial pairing, the GMR-3 will automatically connect to your device when Bluetooth is selected and the device is in range. Bluetooth range is approximately 33ft.
    • Mounting: The STG5-1 system includes a mounting bracket for installing the tuner/controller into the dash of your compatible RZR. An included U-bracket gets bolted to the rear of the tuner/controller allowing the assembly to slide into the kit opening and lock into place. The installation kit also includes a switch opening, for re-locating the lighting toggle-switch if applicable, and a blank cover-plate if not needed.
      • Cutout Diameter: 2.98"
      • Mounting Depth: 4.0"
      • Face Diameter: 4.13"
      • Face Thickness: 0.88"
    • Wiring: All wiring for the GMR-3 tuner/controller exits the rear panel through a sealed non-removable rubber boot. Power, ground, remote, and speaker wires terminate into a 12-pin Molex plug that has a matching harness with 12" bare-ended wires.
    Wire Color Function
    Red/White RCA (Black cable) Front Pre-outs
    Red/White RCA (Brown cable) Rear Pre-outs
    Red/White RCA (White cable) Aux Input
    Red (Inline 1A fuse) +12V Accessory
    Yellow (Inline 10A fuse) +12V Battery
    Black Ground
    Blue Remote Output
    White Left Front Speaker +
    White/Black Left Front Speaker -
    Gray Right Front +
    Gray/Black Right Front -
    Green Left Rear +
    Green/Black Left Rear -
    Violet Right Rear +
    Violet/Black Right Rear -
    (2) Female 8-Pin DIN Sockets For Optional Wired Remotes
    Female Antenna Socket Antenna Input (antenna not supplied)
    Female USB (Type-A) Media Input

    PSAP-2: The STG5-1 includes a PSAP-2 dual accessory adapter. The accessory adapter features a USB (type-A) port and a 3.5mm stereo mini jack with 9.5' of cabling that gets plugged into the tuner/controller's rear-panel USB and Aux In RCA ports, allowing easy access to both inputs. The accessory adapter requires drilling a 1" mounting hole with approximately 2" of mounting depth. A rubber gasket provides a tight seal against the dash and a removable rubber cover helps keep moisture and dirt out of the connector ports when not in use.

    Main Speakers & Amp

    NH1-120B: The STG5-1 includes two NH1-120B 8" compression horn drivers designed for use in your Polaris RZR. Combined with the the included RZR-POD8 speaker pods, the 8" compression horn drivers get mounted in the kick panel area, taking up as little leg room as possible.

    •  Woofer: The low-frequency driver consists of an 8" composite polypropylene cone with a temperature-stable Butyl rubber surround all mounted in a lightweight composite ABS and glass fiber frame. The driver also features a voice-coil made from high temperature copper, wound on a Kapton former, allowing the voice-coil to handle more power while remaining lightweight. A woven fiber composite spider help stabilize the cone and voice-coil.
    • Compression Horn: The 8" drivers feature a coincident mounted compression horn, improving overall volume by as much as +5dB over conventional speakers. A Wavelength Transparent Acoustic Lens improves midrange frequencies through the cone.
    • Dome Tweeter: The NH1-120B speakers include a 1" dome tweeter with a pure titanium compression diaphragm, producing a smooth musical response with high output while requiring minimal amplifier power.
    • Crossover: A 12dB/oct. Butterworth crossover offers a smooth transition from high to low frequencies with conformal coating and PTC (Positive Thermal Coefficient) tweeter protection.
    • Grilles: Each driver features a pre-attached composite grille, treated to resist UV sun fade and weather.
    • Marine Grade: Tested to the highest marine and powersports standards for resisting the elements, both NH1-120B drivers carry an IPX67 weatherproof rating, making them highly resistant to water, dirt, and UV rays.
    • Speaker Specifications: The 4Ω speakers can handle 90 watts RMS (180 peak). They have a frequency response of 20Hz - 20kHz (+/-10dB) and a sensitivity of 92dB.

    RZR-POD8: The STG5-1 audio system includes two RZR-POD8 kick-panel speaker pods. These durable, weatherproof ABS enclosures are custom designed to mount in the kick-panel area while taking up as little foot and leg room as possible. Each speaker pod includes a 21" section of speaker wire pre-run through the enclosures.

    Note: Installation of the NH1-120B speakers into the RZR-POD8s requires removing and replacing the back plate of each compression horn speaker. Two replacement Compression Horn Diaphragm covers are included and will need to be installed, providing a shallower mounting depth for the drivers to fit into the speaker pods.

    NHT1-120BPR: MB Quart 8" compression horn drivers in enclosures:

    •  Woofer: The low-frequency driver consists of an 8" composite polypropylene cone with a temperature-stable Butyl rubber surround all mounted in a lightweight composite ABS and glass fiber frame. The driver also features a voice-coil made from high temperature copper, wound on a Kapton former, allowing the voice-coil to handle more power while remaining lightweight. A woven fiber composite spider help stabilize the cone and voice-coil.
    • Compression Horn: The 8" drivers feature a coincident mounted compression horn, improving overall volume by as much as +5dB over conventional speakers. A Wavelength Transparent Acoustic Lens improves midrange frequencies through the cone.
    • Dome Tweeter: The NHT1-120BPR speakers include a 1" dome tweeter with a pure titanium compression diaphragm, producing a smooth musical response with high output while requiring minimal amplifier power.
    • Crossover: A 12dB/oct. Butterworth crossover offers a smooth transition from high to low frequencies with conformal coating and PTC (Positive Thermal Coefficient) tweeter protection.
    • Grilles: Each driver features a pre-attached composite grille, treated to resist UV sun fade and weather.
    • Marine Grade: Tested to the highest marine and powersports standards for resisting the elements, both NHT1-120BPR drivers carry an IPX67 weatherproof rating, making them highly resistant to water, dirt, and UV rays.
    • Speaker Specifications: The 4Ω speakers can handle 90 watts RMS (180 peak). They have a frequency response of 20Hz - 20kHz (+/-10dB) and a sensitivity of 92dB.
    • Speaker Wiring: Each speaker enclosure includes a 7" pigtail of bare-ended speaker wire extending from the mounting base of the enclosure:
      • Black/White: Speaker positive (+)
      • Black: Speaker negative (-)

    Mounting: The NHT1-120BPR speaker set includes mounting hardware for installing the speaker enclosures on Polaris RZR roll-cage tubing. Each enclosure includes a pre-installed upper mounting clamp along with lower clamp sections for easy mounting of the speaker enclosures. These, along with 10 sets of various sized rubber bushings allow the speaker enclosures to be mounted on round tubing (oval tubing and flat surfaces not supported). Sizes include: 1.5", 1.625", 1.75", 1.875", 2", 2.125", 2.25", 2.375", 2.5", 2.625", and 2.75". Optional swivel-mounts (SWVL-1B) are included that can be installed on the enclosures, allowing the speakers to be swiveled up to 180˚ in both directions.

    NA2-400.2 Amplifier: The STG5-1 sound system includes an NA2-400.2 two-channel amplifier for driving the 4 compression horn drivers. The Class-D amp can output 2 x 100w RMS @4Ω or 2 x 200 RMS @2Ω and has a frequency response of 20Hz - 20kHz. The amplifier features conformal coated PC boards that resist corrosion from salt spray and moisture, and a Q-Stasis pre-amplifier stage that reduces incoming noise from a headunit, greatly improving sound quality. A dual coil Pulse-Width Modulated power supply keeps a constant steady voltage. The Class-D topology combined with aluminum heat sinks allows the amp to produce the maximum amount of power while keeping it cool. Mounting hardware is included for mounting the amp in the front steering column area of your compatible Polaris RZR. Amplifier front and rear panels include the following:

    • Inputs: One pair of RCA jacks provides the audio input for the amp.
    • Outputs: Two speaker output channels are provided on a 7" hardwired harness terminated with a 4-pin Molex connector.
    • Power/Ground/Remote: A second 7" hardwired harness with Molex connector is provided for power, ground, and remote connections.
    • X-Over: A 3-position slide-switch allows selection of either HP, LP, or Off. The HP and LP options include their own crossover dial with the High-pass filter allowing adjustment from 15Hz - 300Hz and the Low-pass filter adjustment ranging from 50Hz - 300Hz.
    • Level: Varies the input signal level with a range of 9V - 0.2V.

    Subwoofer & Amp

    RZR-SUB10 Enclosure: The STG5-1 includes a custom-formed ABS enclosure for the included 10" subwoofer. The enclosure gets mounted in place of the factory glove box, while still retaining the original glove box door. It includes a 50" section of speaker wire pre-installed in the enclosure with the internal section of the speaker wire terminated with 2 sets of bare-ends for attaching to both sets of the subwoofer's terminals. The other end of the speaker wire contains a 2-pin Molex plug that plugs directly into the amp's output harness.

    FW1-254 Subwoofer: The MB Quart Formula Series 10" subwoofer features a molded polypropylene cone with a Butyl rubber surround, making it resistant to moisture, dirt, and damaging UV rays. Dual 2" high-temperature voice coil formers along with front and rear venting allows more heat dissipation. Each of the subwoofer's two 4Ω voice coils has its own set of spring-loaded push-terminals for easy connection to the enclosure's speaker wire.

    NA2-400.1 Amplifier: The STG5-1 sound system includes an NA2-400.1 two-channel amplifier for driving the subwoofer's dual voice-coils. The Class-D amp outputs 400w @ 2Ω (200W @ 4Ω) and has a frequency response of 20Hz - 20kHz. The amplifier features conformal coated PC boards that resist corrosion from salt spray and moisture, and a Q-Stasis pre-amplifier stage that reduces incoming noise from a headunit, greatly improving sound quality. A dual coil Pulse-Width Modulated power supply keeps a constant steady voltage. The Class-D topology combined with aluminum heat sinks allows the amp to produce the maximum amount of power while keeping it cool. Mounting hardware is included for mounting the amp with the subwoofer enclosure. The amplifier's front and rear panels include the following:

    • Inputs: One pair of RCA jacks provides the audio input for the amp.
    • Outputs: A single 2-wire subwoofer speaker output is provided on a 7" hardwired harness terminated with a 2-pin Molex connector.
    • Power/Ground/Remote: A 7" hardwired harness with Molex connector is provided for power, ground, and remote connections.
    • Wired Remote Input: A 4-pin Molex plug on a 7" harness provides the connection for the included wired remote level control. This can be mounted on the dash or console and includes a 15.5' cable for plugging into the amplifier's harness.
    • X-Over: A 3-position slide-switch allows selection of either HP, LP, or Off. The HP and LP options include their own crossover dial with the High-pass filter allowing adjustment from 15Hz - 300Hz and the Low-pass filter adjustment ranging from 50Hz - 300Hz.
    • Level: Varies the input signal level with a range of 9V - 0.2V.

    Wiring: The STG5-1 sound system includes pre-configured harnesses designed to make installation much easier. Wiring is provided for running power and ground to the battery as well as signal leads from the tuner/controller to the amplifier and speaker wires from the amp to the speaker pods.

    Loading accessories...

    Customer Q&A

    Loading articles...

    TOP