About the AKG P220 Bundle
When you buy a microphone, you don't just need a microphone...you need a cable to connect it to the mixer, and a stand to hold it for you. That's why we've created this special deal for you.
AKG's Perception 220 condenser microphone uses a 1" diaphragm for clear, accurate sound reproduction. It features an integrated pop filter, an all-metal body, and a switchable low-cut filter. With a maximum SPL of 155 dB, it'll handle anything that you throw at it in the studio. And it comes with a spider-type shock mount and an aluminum case.
The K&M Tripod Stand adjusts from 39-3/4" to 67-3/4" high, and features a telescoping boom arm that can reach as far as 28-1/2", adapting from near-ground level applications to an overhead setup with the turn of a knob.
The Whirlwind Connect "Mic" Series cable features solid build quality and outstanding value, plus it's backed by Whirlwind's lifetime warranty.
This package gives you everything you need to plug in and start recording. And it's available for a special price.
Warranty: 2 years (mic); 5 years (stand); lifetime (cable).
What's in the box:
- The AKG P220 Microphone bundle consists of the AKG condenser microphone with a K&M microphone stand and a 10-foot Whirlwind microphone cable (all individually packaged)
- The AKG P220 microphone box includes:
- Cardioid condenser large diaphragm side-address microphone
- SH100 Spider Shock mount
- Spare elastic band (for shock mount)
- 5/8"-to-3/8" Thread adapter
- Metal case
- User Instructions
- Warranty card
- China RoHS Declaration
- The K&M microphone stand box includes:
- Mic floorstand
- Boom arm
- The Whirlwind microphone cable box includes:
- 10' Mic cable (w/ a male XLR connector on one end and a female XLR connector on other end)
- Cable tie
Thanks for submitting your review
More details on the AKG P220 Bundle
Overview: The AKG Condenser Microphone Package includes the AKG P220 condenser microphone, along with a K&M mic stand and a 10' Whirlwind microphone cable.
Microphone Overview: The AKG P220 Project Studio side-address microphone is a large-diaphragm, true condenser microphone. It is designed to give you a warm and clear sound for recording vocals, acoustic instruments, and brass instruments. It is rugged enough to work well in live performances. The mic comes with a spider shock mount with a thread adapter, and a sturdy aluminum case.
Polar Pattern: The P220 should be mounted in an upright position, with the front of the microphone (marked by the AKG logo) facing toward the sound source. The cardioid polar pattern is more sensitive to sounds directly in front of the element, which reduces the pickup of unwanted sounds from the sides and back.
Bass Cut Filter: The P220 is equipped with a Bass-Cut filter which reduces low-frequency distortion caused by wind noise or air handling equipment. It also minimizes the proximity effect caused by close-miking from 4" or less. The Bass-Cut filter rolls off at 12 dB/octave from 300Hz downward.
Attenuation Pad: The P220 is capable of handling sound pressure levels up to 155 dB without distortion when the switchable Attenuation Pad is engaged. The pad increases the headroom by 20 dB, and prevents the microphone's output level from overloading the transformers used in mixer mic preamps. Without the pad, the maximum SPL without distortion is 135 dB.
Shock Mount: Included with the P220 is the SH100 Spider-type Shock Mount. The shock mount isolates the microphone from mechanical vibrations and noise that might be transmitted through the mic stand. The shock mount has a 5/8"-27 thread, and comes with a metal thread adapter, to let you mount it to stands with 3/8"-16 threads.
Microphone Warranty: The AKG P220 microphone is covered by a 2-year warranty.
- Capsule: 1" true condenser
- Frequency Response: 20Hz - 20kHz
- Open Circuit Sensitivity: -34dBV/Pa (20mV)
- Impedance: 200 ohms
- Recommended Load Impedance: ≥ 1000 ohms
- Maximum SPL: 135dB, 155dB (w/-20dB pad)
- Bass Cut Filter: 300 Hz, 12dB/octave
- Phantom Power: +48V +/-4V
- Output Connection: XLR male
- Dimensions: 2.13" diameter, 6.544" length
- Weight: 18.7 ounces
Microphone Floorstand w/ Boom: This microphone floorstand from K&M is designed for professional use and is extremely stable and durable. It features steel, zinc die-cast, and fiberglass-reinforced plastic construction with sturdy fittings and a high-quality black finish. It features a tripod-base with rubber feet to make sure it stays securely in place. The legs fold-up for easier storage and portability. A telescopic boom arm is also included for added convenience and flexibility.
- Threaded Connector: 5/8"
- Adjustable Height: 39.76" to 67.72"
- Adjustable Boom Length: 16.73" to 28.54"
- Weight: 4.6 lbs
Stand Warranty: The K&M microphone stand is covered by a 5-year warranty.
Connect Series: The Whirlwind MIC10 microphone cable is part of the MIC series that offers great value. The cable has a black PVC jacket with polyethylene insulation, and is terminated with male and female XLR connectors. It comes with a hook-and-loop cable tie to keep them neat for storage. These imported cables are available in four lengths: 3', 10', 25', and 50'. This cable is 10' in length.
Cable Warranty: The Whirlwind Connect MIC10 microphone cable carries a Limited Lifetime warranty.