About the AudioQuest Golden Gate
AudioQuest bases its cable designs on real-world testing lots of experimenting, listening, and tweaking. With its Golden Gate cables, AudioQuest has hit a "sweet spot" that puts high-end performance within the price range of many music lovers. These cables bring together some of AQ's most advanced designs and materials, for excellent sound quality from a cable that's relatively thin and lightweight.
Solid Perfect Surface Copper (PSC) conductors
One of the most important materials that goes into an audio cable is the metal used for its conductors the parts of the cable that actually carry the signal. The Golden Gate's conductors are made from a material called "Perfect-Surface Copper." It's a breakthrough cable technology that can translate into a not-so-subtle improvement sound quality, compared to lesser conductor materials. The conductor's solid (rather than stranded) metal composition and astonishingly smooth surface allow for optimal signal transfer with a minimum of distortion.
Advanced cable geometry
While many cables use a single path for both the ground and shield, AudioQuest uses a design they call "double-balanced asymmetrical geometry." This design separates the ground and shield paths for clean, quiet performance.
Cold-welded, gold-plated connectors
All the details of the cable's construction are well thought-out. For instance, the Golden Gate's connectors are cold-welded, rather than soldered, which eliminates a common source of distortion found in many other audio cables.
- length: 1 meter/3.3 feet
- stereo cable with a male miniplug (3.5mm) connector at one end, and dual RCA connectors at the other
- solid Perfect Surface Copper (PSC) conductors for excellent performance
- foamed polyethylene insulation for low distortion
- metal-layer NDS (Noise Dissipation System) shields against RF interference
- double-balanced asymmetrical cable geometry separates the ground and shield for quieter performance
- black and red braided jacket
- cold-welded, gold-plated connectors feature a solder-less design for lower distortion
- warranty: 5 years
- Our 60-day money-back guarantee
- MFR # GOLDG01MR
What's in the box:
- 1-Meter stereo minijack-to-RCA audio cable (with a male stereo 3.5mm connector on one end and a pair of stereo RCA male audio jacks on other end)
AudioQuest Golden Gate reviews
Thanks for submitting your review
More details on the AudioQuest Golden Gate
Golden Gate Series Stereo Audio Minijack-to-RCA Cable: The AudioQuest Golden Gate stereo audio minijack-to-RCA cable is terminated by a gold-plated male 3.5mm stereo connector on one end and a pair of gold-plated stereo RCA male connectors on other end. The AudioQuest Golden Gate stereo audio minijack-to-RCA cable is available in the following lengths.
- 0.6 meter (2')
- 1 meter (3' 4")
- 2 meter (6' 7")
- 3 meter (10')
- 5 meter (16' 5")
- 8 meter (26' 3")
Solid Perfect-Surface Copper Conductors (PSC): Perfect-Surface Copper has an astonishingly smooth and pure surface. Proprietary metal-processing technology protects the wire's surface at every stage of drawing and fabrication. When high-purity low-oxide copper is kept as soft, pure and smooth as possible, it becomes a wonderfully low-distortion conductor. Electrical and magnetic interaction between strands in a conventional cable is the greatest source of distortion, often causing a somewhat dirty, harsh sound. Solid conductors are fundamental toward achieving Golden Gate's very clean sound.
Foamed-Polyethylene Insulation: Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy (loss). Some of this energy is stored and then released as distortion. Golden Gate uses air-filled Foamed-Polyethylene Insulation on both conductors because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.
Metal-Layer Noise-Dissipation System (NDS): 100% shield coverage is easy; preventing captured RF Interference from modulating the equipment's ground reference requires AQ's Noise-Dissipation System. Noise-Dissipation System prevents a significant amount of RFI from reaching the equipment's ground plane.
Double-Balanced Asymmetrical Geometry: Purposely designed for single-ended applications, Double-Balanced Asymmetrical Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.
Cold-Welded, Gold-Plated Plugs: This plug design allows for a connection devoid of solder, which is a common source of distortion. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion.
2 questions already asked