Worth the cost
These jumpers give noticeably better sound than the "stock" jumpers that come on speakers. Well worth the cost.
Pros: Improved sound quality.
Cons: Can be difficult to attach.
Free Shipping on all orders $35 and up
We offer standard delivery in 2 business days or less.
Estimated standard delivery time to the U.S. and Puerto Rico
Delivery time estimates do not apply to large or heavy items that require special shipping (including most TVs), items shipped directly from the manufacturer, or out-of-stock items. Some items that ship from the manufacturer can only be delivered to addresses within the 48 contiguous states.
Delivery time for standard shipping to any of the 48 contiguous U.S. states is 1-2 business days. Delivery time for standard shipping to Alaska, Hawaii, and Puerto Rico is 3 business days. Saturday, Sunday and national holidays are not considered business days for delivery purposes.
AudioQuest PSC BiWire Jumpers
Set of 4 jumpers for use with a pair of bi-wirable speakers
California customers: Please click here for your Proposition 65 warning.
Overview
Our take on the AudioQuest PSC BiWire Jumpers by Crutchfield's Ralph Graves
You know that upgrading your system's audio cables can improve its performance and sound. The same is true of bi-amp jumper cables. Now you can replace the cheap, gold-plated stamped-brass jumpers included with most bi-ampable speakers with AudioQuest PSC BiWire Jumpers.
These jumpers are made of AudioQuest's high-purity Perfect Surface Copper, for improved signal transfer. And they're silver-plated, to protect the jumpers from sound-degrading oxidation.
Product Highlights:
- set of four 16-gauge solid copper bi-wire jumpers (each is about 4" long)
- silver-plated for protection against oxidation
- warranty: 1 year
- Our 60-day money-back guarantee
What's in the Box:
- Four 16-gauge bi-wire jumpers (silver)
These jumpers give noticeably better sound than the "stock" jumpers that come on speakers. Well worth the cost.
John, Las Vegas, NV
Why Shop With Us?10 Reasons.
Reviews
AudioQuest PSC BiWire Jumpers Reviews
Average Customer Review(s):
(3 Reviews)
AudioQuest PSC BiWire Jumpers
Love it! Instant upgrade over the factory provided jumper plates.
Pros:
Cons:
Improvement
I purchased these jumpers to replace the factory jumpers on my Klipsch speakers. While not a drastic improvement, the speakers seem to sound better to a slight extent. Any improvement no matter how small is worth it at this low cost.
Pros: Worth the cost.
Cons: None.
Q & A
Customer Q&A
Crutchfield asked
Why did you buy this?
Standard jumper from dealers are lower quality. This is an easy upgrade that can make a big difference. [ daniel Oct 15, 2018 ]
2 questions already asked
No need to strip them just wrap them around the post. Better yet if you have unused speaker ports consider bi-amping for a much better sound [ Jeffery Sep 05, 2017 ]
no, these are not speaker wire, install as is use electrical pliers to tighten [ Diego Sep 03, 2017 ]
These jumpers are used when you have a speaker that can be bi-wired, but you don't want to do so. This is usually due to cost, as bi-wiring requires an additional set of cables per speaker, or an expensive specialty cable that takes two terminals on one end, and outputs to 4 terminals on the other. I have the Silver RX 6 towers from Monitor Audio, and like most manufacturers, they provide a set of brass stamped connectors to tie the high end of the speaker to the low. These connectors are not very high quality. The jumpers replace those stamped connectors, allowing me to drive the speakers with one set of cables. [ Terence May 07, 2015 ]