About the Boyo VTL17ir
For the darkest spaces
Boyo makes mounting simple by securing their VTL17ir backup camera onto a sturdy strap that stealthily attaches behind any license plate. Once you power the camera and run the included video cable to the screen in your dash, you'll gain a wide-angle view of what's behind you every time you throw your vehicle into reverse. Thanks to a stellar CMOS sensor and built-in IR lights, the VTL17ir delivers high-quality picture even when the night seems impenetrable. The camera offers selectable parking lines, and it'll also work as a front camera.
Note: A rear-view camera provides an additional view when reversing your vehicle. It is intended to be used in conjuction with your rear- and side-view mirrors to give a fuller picture of what's behind you. It is not intended as a replacement for your mirrors.
- CMOS color backup camera and bar-style mount with night vision IR
- universal fit
- compatible with any radio with an RCA video input (most aftermarket models, only a few factory)
- 170-degree wide angle
- selectable reverse image and parking lines
- minimum illumination: 0 Lux
- resolution: 600 TV lines (720 x 480)
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # VTL17ir
What's in the box:
- Backup camera w/ integrated mounting bracket (attached 57" power/video cable)
- Wiring harness (20.5' video cable/56" power cable)
- RCA male coupler
- Two M6 x 24mm screws
- Two M3 x 12mm screws
- Two-sided tape
- Warranty Card
- Product Registration Card
Boyo VTL17ir reviews
Thanks for submitting your review
More details on the Boyo VTL17ir
Features & specs
|Features and Specs|
|Camera Type||Rear view|
|Horizontal Viewing Angle||170|
|Vertical Viewing Angle||0|
Backup Camera: The Boyo VTL17IR is a universal backup camera that can be added to almost any vehicle with an aftermarket receiver that features an integrated video monitor and composite video camera input. The Boyo VTL17IR includes a backup camera with an integrated license plate mounting bracket, composite video cable, and power/ground harness.
Note: The Boyo VTL17IR is meant as a back-up aid only; never solely rely on the rear-view camera when backing-up. In addition to using the rear-view camera, always look behind you to make sure everything is clear when backing up your vehicle.
CMOS Image Sensor: The Boyo VTL17IR backup camera is equipped with a highly sensitive 1/4" color CMOS image sensor with a total resolution of 720 x 480 pixels.
Wide Viewing Angle: The VTL17IR backup camera offers a 170° wide viewing angle.
Infrared (IR): The VTL17IR utilizes infrared (IR) for better visibility at night.
Waterproof (IP67): The Boyo VTL17IR features a waterproof (IP67) housing to protect it from the elements.
Selectable Mirror/Non-Mirror Image: By default, the backup camera will display a "mirror" image. If using the camera as a front camera, cut the white loop of the cable that is attached to the camera to get a non-mirror image.
Parking Guidelines: The backup camera provides parking assist lines on the screen of your aftermarket display monitor. These parking lines are there to assist you when backing up into a parking space. There are two vertical lines which help you judge the left and right edges of the parking space and your vehicle. There are also three color-coded (green/yellow/red) horizontal lines that are used to distinguish how close you are getting to the end of the parking spot.
Note: If you do not need and want to remove the parking guidelines, then cut the blue loop of the cable that is attached to the camera.
Composite Video Output: The Boyo VTL17IR backup camera if fitted with a composite video connector (RCA) which makes it compatible with virtually any in-dash receiver with integrated video monitor and a composite video camera input. The total length of the composite video cable is 25.2'.
License Plate Mount: The VTL17IR features an integrated mounting bracket that is designed to use your vehicle's existing license plate mounting equipment. The integrated bracket is designed to be mounted behind the license plate so that only the camera is visible. Once the camera and bracket are mounted, you can position the camera forward or angle it down. The mounting hole spacing of the license plate bracket is roughly 7" to 7.3125" apart.
Note: The Boyo VTL17IR is designed to work best on vehicles that have a license plate located at the center and above the rear bumper. If your vehicle has a plate location that is offset to the left side, right side or your plate is located under the bumper then the VTL17IR may not provide optimum performance.
14 questions already asked