About the Klipsch Reference Premiere RP-280F
Flagship performance for your listening pleasure
Flagship performance for your listening pleasure
Want to raise your standard of listening? Park a pair of Klipsch RP-280F towers in your room. These powerful floor-standers are the largest speakers in Klipsch's Reference Premiere Series. Each RP-280F boasts dual 8" woofers for thunderous bass and warm, clear mids, plus Klipsch's signature 1" horn tweeter for crisp, extended, highs. But you don't have to take our word for it. Discover for yourself the effortless, dynamic sound that's made Klipsch loudspeakers a big Crutchfield customer favorite for years. So go ahead and grab a couple of these beasts, crank 'em up, and prepare to batten down the hatches.
The Reference Premiere Series difference
Never one to rest on its laurels, Klipsch has been busy refining and improving its designs to create loudspeakers that blow the doors off of its loyal followers' expectations. The new Reference Premiere Series builds on the acoustics and technologies of Klipsch's classic Reference Series, with important enhancements that provide an even more intense listening experience.
Hybrid horn technology for dynamic performance
Horn technology is one of Klipsch's long-standing hallmarks. Flared openings in the speaker cabinet project sound waves toward your listening area and prevent them from simply spilling out in all directions. This design reduces reflections that can color the sound, and boosts dynamics and efficiency for powerful, "front row" sound that remains crystal-clear at all volume levels.
Klipsch's newly designed Hybrid Tractrix® horn features a circular throat around an advanced titanium diaphragm tweeter that transitions into a square 90º x 90º mouth. This unique shape provides a cleaner, more efficient transition of sound waves into your listening space. Compared to previous models, this horn design delivers a wider sweet spot with more precise placement of instruments and vocals. Even the horn material itself has been upgraded to molded silicone rubber that helps decrease resonance for smoother, warmer highs.
A horn that can enhance bass, too
Look around the back, and you'll see that instead of the conventional round port tube found on many speakers, Klipsch uses a Tractrix horn-shaped opening for smoother, more efficient airflow in and out of the cabinet. The resulting decrease in air turbulence makes for cleaner, more powerful bass with reduced port noise and low-frequency distortion.
High-tech woofer design
The RP-280F's Cerametallic™ woofers dish out smooth midrange and articulate, well-defined bass. Klipsch makes its cones out of specially treated aluminum that's strong yet lightweight to dampen and prevent distortion. With the Reference Premiere Series, Klipsch also gave these woofers a newly developed titanium voice coil former that allows more linear movement for enhanced efficiency, lower distortion, and extended low frequency response.
Build a complete Klipsch system
You can build a great sounding stereo system using a pair of RP-280Fs, or team them with other Klipsch Reference Premiere speakers and a subwoofer for high-impact home theater.
- frequency response: 32-25,000 Hz (±3dB)
- impedance: 8 ohms compatible
- sensitivity: 98 dB
- power handling: up to 150 watts RMS (600 watts peak)
- 90° x 90° Hybrid Cross-Section Tractrix® horn with 1" LTS (Linear Travel Suspension) titanium diaphragm tweeter
- two 8" Cerametallic cone woofers with rigid titanium voice coil formers
- bass-reflex design
- rear-firing Tractrix port provides fast, efficient airflow from the cabinet for clear, powerful bass
- magnetically attached grille for a clean, streamlined look
- durable polymer veneer finish
- dual binding post speaker terminals for bi-amping or bi-wiring
- built-in MDF (Medium Density Fiberboard) base for increased speaker stability
- 10-9/16"W x 43-1/16"H x 17-3/8"D
- weight: 62.5 lbs.
- warranty: 5 years
- Our 60-day money-back guarantee
- MFR # 1064654
What's in the box:
- Floorstanding loudspeaker (Walnut)
- Detachable magnetic grille
- 4 Spike feet
- 6 Rubber feet
- User Manual
- Warranty Information
- Important Safety Instructions
Klipsch Reference Premiere RP-280F reviews
Thanks for submitting your review
More details on the Klipsch Reference Premiere RP-280F
Features & specs
|Tweeter Size (inches)||1|
|Midrange Size (inches)||N/A|
|Woofer Size (inches)||8|
|Built-in Powered Sub||No|
|Dolby Atmos Drivers|
|Connector Type||Binding post|
|Parts Warranty||5 Years|
|Labor Warranty||5 Years|
|Frequency Response||32-25k Hz|
|Subwoofer Amp Power||---|
90° x 90° Hybrid Tractrix Horns: A redesigned Tractrix Horn utilizes a circular horn throat paired to a square horn mouth to further improve high-frequency response and extension, while enhancing imaging and dynamics. The compressed molded rubber construction adds high frequency damping to reduce harshness and improve detail. This creates the cleanest, most natural sound possible. These 90° x 90° Hybrid Tractrix Horns provide a wider sweet spot while maintaining controlled directivity of the sound.
LTS Tweeters: Behind the Tractrix Horn lies a 1" titanium tweeter with a linear travel suspension for open, natural, sound. The Linear Travel Suspension minimizes distortion for enhanced, detailed performance.
Cerametallic Woofers: The two 8" woofers of the RP-280F floor-standing loudspeaker features Klipsch's distinctive, copper-colored Cerametallic material. Made with an anodized aluminum, this cone is strong and dent resistant. The anodizing process converts its inner and outer surfaces to ceramic. The outcome is a rigid cone with superb damping characteristics that will not flex or resonate at frequencies within the woofer's operating range The 8" woofers also employ a rubber surround for added durability.
Crossover Network: The Klipsch RP-280F floor-standing speaker's crossover network is constructed using extremely high-quality components including top-of-the-line internal wiring, polyester film-type capacitors and an air-core inductor to ensure signal purity and proper driver integration. The speaker's enhanced crossover frequencies (1750Hz) offer smoother on-axis and off-axis integration.
Bass Reflex MDF Enclosure: The Klipsch RP-280F employs a bass reflex enclosure with a rear-firing Tractrix port for greater efficiency and bigger bass response. Utilizing Tractrix geometry, the all new Reference Premiere bass port allows for the most efficient, fastest air transfer from the cabinet for a clean, powerful low frequency response. The speaker's rigid cabinet offers improved internal cross-bracing to minimize panel vibrations that can color sound.
- MDF Plinth: The all new satin painted MDF plinth footers of the Klipsch Reference Premiere series floor-standing speakers lend an acoustically sound, authoritative stance when placing the speakers on your wood, tile, or carpeted floors.
- Magnetic Grille: The floor-standing loudspeaker features a removable magnetic low-diffraction grille which easily snaps into place over its polymer front baffle.
Dual Binding Posts: The speaker has two sets of binding posts connected by jumpers. Using the dual binding posts, you can bi-amp or bi-wire the speakers. The binding post terminals will accept banana plugs (single only), pin-connectors, spade-connectors, and bare wire.
Rubber or Spike Feet: The floor-standing speaker comes with rubber and spike feet. The included rubber feet offer safe placement of the speaker on your tile or hardwood floors. The included optional spikes are intended to increase stability on carpeted floors; spikes are not recommended for hard surfaces. The rubber feet simply stick to the bottom of the speaker's MDF plinth, while the spikes screw into the bottom of the speaker's MDF plinth.
- The rubber feet add approximately 0.125" of height to the speaker.
- The spike feet add approximately 0.875" of height to the speaker.
Placement: The Reference Premiere series floor-standing loudspeakers are designed to perform well in a wide variety of locations but you will get the most out of the speakers by following these simple guidelines.
- For optimum performance, Klipsch suggests placing the speakers 6'-15' apart. They may also be toed-in slightly for better stereo imaging. The listening position should be approximately 1-1.5x the distance separating the speakers.
- The floor-standing loudspeakers should be equal distance from the floor and the wall behind them. It can also help to have the left and right speakers at different distances from their nearest side walls. This sort of staggering helps smooth the bass range.
- The speaker requires a few inches of clearance behind it to allow its port to breathe and will sound best when they are at least two feet from any nearby walls.
19 questions already asked