About the Nuvo NV-2IW6 Series Two
Hideaway in-wall sound
Hideaway in-wall sound
Nuvo's value-packed NV-2IW6 speakers are an excellent addition to a custom-installed speaker system. They work well as surround or rear speakers in home theater setups. They also do a great job reproducing stereo sound if you'd rather use the pair for music listening. The best part: they don't take up any floor space. The included rimless grilles make the speakers blend in seamlessly with your wall.
A powerful woofer and an articulate tweeter
Each speaker uses a 6-1/2" woofer to deliver powerful midrange and upper bass, helping action sequencies come to life. The 1/2" silk dome tweeter keeps the highs smooth and easy on the ears without losing detail or sound quality. Plus, the tweeter is aimable so you can still have accurate imaging even if your listening position is a bit off-axis.
DIY installation
If this is a do-it-yourself install, check out our guide to installing in-wall speakers, along with our selection of in-wall speaker wire.
Product highlights:
- 6-1/2" polypropylene woofer
- 1/2" silk dome tweeter
- aimable tweeter to better direct high frequencies to your listening position
- rimless, paintable magnetic grille for a seamless look
- frequency response: 60-20,000 Hz (± 3dB)
- power handling: up to 50 watts RMS
- impedance: 8 ohms
- sensitivity: 86 dB
- overall size: 8-13/16"W x 11-15/16"H
- cutout required: 7-5/8"W x 10-3/4"H
- mounting depth: 3-5/16"
- weight: 3.97 lbs. (each)
- warranty: lifetime
- Our 60-day money-back guarantee
- MFR # NV-2IW6
What's in the box:
Nuvo NV-2IW6 Series Two owner's manual
- 2 In-wall loudspeakers
- 2 Grilles
- Instruction Sheet
- Cutout Template
Reviews
Customer reviews
Loading reviews...
Nuvo NV-2IW6 Series Two reviews
Average review:
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Nuvo NV-2IW6 Series Two
Features & specs
| Features | ||
|---|---|---|
| Quantity in Package | Pair | |
| Tweeter | Soft-Dome | |
| Aimable Tweeter | Yes | |
| Woofer Composition | Poly | |
| Woofer Surround | Rubber | |
| Connector Type | Spring clip | |
| Bi-Amp Inputs | No | |
| Built-in Back-box | No | |
| Moisture Resistance | ||
| Indoor (Moisture-resistant) | No | |
| Outdoor (Partial Exposure) | No | |
| Outdoor (Full Exposure) | No | |
| Specs | ||
| Tweeter Size | 0.5 | |
| Midrange Size | N/A | |
| Woofer Size | 6.5 | |
| Speaker Shape | Rectangle | |
| Cutout Width | 7.625 | |
| Cutout Height | 10.75 | |
| Mounting Depth | 3.3125 | |
| Power Range (Watts) | up to 50 | |
| Sensitivity | 86 dB | |
| Impedance (Ohms) | 8 | |
| Frequency Response | 60-20kHz | |
| Parts Warranty | Lifetime | |
| Labor Warranty | Lifetime | |
Product Research
Features
2-Way Driver Design: The Legrand Nuvo Series Two NV-4IW6 in-wall loudspeaker utilizes a two-way driver design, featuring a 0.5" silk soft-dome tweeter that pivots and one 6.5" poly cone woofer with a butyl rubber surround. The pivoting tweeter is mounted to a unique bridge and allows you to aim the tweeter at your targeted listening area.
Applications: The Legrand Nuvo Series Two NV-4IW6 can be used as a front or rear channel speaker in a home theater application. It can also be used in a 2ch stereo application or part of a distributed audio system.
Magnetic Grille: The Nuvo NV-4IW6 comes with a low-profile, rimless grille that attaches magnetically to the front-baffle of the in-wall speaker. The grille features a white finish, but can be painted to match your wall. The low-profile, magnetic grille only protrudes 0.1875" from the wall.
Spring-Clip Terminals: The Nuvo NV-4IW6 in-wall loudspeaker is outfitted with a set of spring-clip terminals to attach bare speaker wire (up to 12AWG) or pin-connectors.
Mounting Options: The Series Two NV-4IW6 requires a rectangular cutout in the wall that measures 7.625" (w) x 10.75" (h) x 3.3125" (d). Six swivel "dog-leg" clamps with integrated mounting screws secure the speaker in the wall. There needs to be at least 0.75" of clearance around the inside of the cutout to accommodate the swivel "dog-leg" clamps. The "dog-leg" clamps will accommodate up to 1.5" drywall thickness.
Loading accessories...
Customer Q&A
Loading articles...
good price
Chad from Acton, CA